Search

In the field of micro and mesoscale combustion, the feature of flame-wall thermal coupling is of great significance because of its small scale nature. Thus, this work provides a comprehensive heat transfer analysis in cylindrical combustors from the perspective of numerical simulation. The combustor has a fixed length-to-diameter aspect ratio of 10, and the channel diameter is scaling up from 1 mm to 11 mm to explore the influence of chamber dimension on heat transfer and flame structure. The distribution of convective and radiative heat flux on inner surface, contribution of thermal radiation are given. Moreover, the role of radiation in flame structure is analyzed, and the convective and radiative heat losses are quantitatively analyzed. We find that radiative heat flux is smaller compared to convective heat flux, and the proportion of radiative heat flux becomes larger with an increasing diameter. Thermal radiation does not change the flame structure when the diameter is less than 3 mm. When the diameter is greater than 5 mm, thermal radiation changes the location of flame front. The heat loss becomes larger at a smaller diameter, and heat loss ratio can reach approximately 73.6% in the combustor with diameter of 1 mm. [Display omitted] • Comprehensive heat transfer analyses in micro combustors are revealed. • The contributions of thermal radiation in combustors with different scales are investigated. • The role of radiation in the flame structure is analyzed. • Heat losses in cylindrical combustors from microscale to mesoscale are quantified. [ABSTRACT FROM AUTHOR]

Driven by the demand for accurate intrinsic kinetics for the prediction of the combustion rate of purely fired Zhundong coal (ZDC) in a slag tapping boiler, the surface activation function (SAF) and intrinsic kinetic parameters of two types of rapid-pyrolysis ZDC chars were revealed via the isothermal and nonisothermal thermogravimetric analysis methods. The isothermal kinetic results show that the activation energy (E), reaction order and SAF of these two chars were the same, at 146 kJ/mol, 0.78 and X 0.44 (1 – X)−0.48, respectively. Therefore, the difference in the intrinsic reaction rate between these two chars was caused only by the different pre-exponential factors, which are mainly influenced by the specific surface area and catalytic elements in char ash. Nonisothermal kinetic parameters were obtained via the isothermal model-fitting method (ISOM), thereby using the isothermal SAF to fit the nonisothermal data at different heating rates (β s). The results indicate that the E values of the two chars were 148.95 ± 3.12 kJ/mol and 146.16 ± 1.66 kJ/mol, indicating that β has little influence on E. These measured values are consistent with the isothermal E values, so the ISOM is suitable for the determination of the nonisothermal kinetics of rapid-pyrolysis char combustion. • Intrinsic combustion kinetics of rapid-pyrolysis Zhundong coal chars were obtained. • Different chars have the same E , reaction order and surface activation function. • Catalytic elements have a positive effect on A but have little influence on E. • The heating rate has little influence on E of rapid-pyrolysis char combustion. • ISOM is suitable to describe the combustion kinetics of rapid-pyrolysis char. [ABSTRACT FROM AUTHOR]

This paper proposes a hyperspectral imaging technique for capturing radiative images at a high temporal–spatial resolution, for the purpose of spectrally visualizing the instantaneous combustion behaviors of single coal particles. We initially use a hyperspectral imaging device to record the combustion processes of two types of single pulverized coal particles on a McKenna flat-flame burner. From the snapshot images captured by the device, we observe the combustion processes, ignition characteristics, flame morphologies, and sizes of the two single coal particles. The observations indicate that the two single coal particles undergo volatile release/combustion and char ignition/oxidation during the luminous combustion process; moreover, both particles exhibit homogeneous ignition characteristics under the experimental conditions. Furthermore, based on the spectral radiative intensity images obtained via the device, the soot temperature and volume fraction images of the two single coal particles in the envelope flame are obtained at different burning times. Thereafter, the influences of the combustion behaviors and soot formation mechanisms on the distribution rules of the soot temperature and concentration at different combustion periods are discussed. Finally, the temperature and apparent spectral emissivity values of the two single char particles during the char oxidation process are also calculated to analyze their combustion behaviors. The results show that the temperature changes within a relatively narrow range with respect to the burning time during the oxidation stage, whereas the spectral emissivity continues to increase with the oxidation of chars and subsequently decreases. [ABSTRACT FROM AUTHOR]