Search

In this article, the soft-switching technique is an important way to achieve high frequency and high conversion efficiency for transformerless grid-connected inverters (TLIs) with distributed photovoltaic generation. Meanwhile, new technical standards require TLIs to have a wider power factor operation range to support grid voltage, which means that there are positive power regions and negative power regions in a grid period. In order to fulfill soft-switching for high-frequency working switches during all power regions, a pair of zero-voltage-transition (ZVT) resonant cells with different capacitor connections are first derived in this article, and two equivalent two-quadrant resonance networks are originated by using the pair of ZVT resonant cells alternatively. Furthermore, defined connection points of the obtained two-quadrant resonance networks in TLIs are explored, and a guideline to invent new ZVT-TLIs is summarized. As a result, two families of ZVT-TLIs with full power factor range (ZVT-TLIs-FPF) are obtained. In order further to verify the correctness of the proposed guideline, the obtained ZVT-HERIC-FPF is taken as an example to analyze its operation principle. Finally, experimental results from a 1 kW prototype at 100 kHz are provided to verify the effectiveness of the proposed structuring method. [ABSTRACT FROM AUTHOR]

The grid inverters play an important role in renewable energy systems, transferring the dc power to the ac grid. Galvanic isolation is usually needed between the dc source and the grid due to safety reasons and grounding leakage current mitigation. In this article, a soft-switching isolated grid inverter is proposed based on the current-fed matrix-type configuration. The topology of this converter is composed of a current-fed H-bridge on the side of dc source and a direct matrix converter on the grid side, which are linked by a high-frequency transformer. The current-fed H-bridge on the primary-side can smooth the dc-source current and control the dc-source current directly. The avoidance of dc-link energy-storage element in the single-stage matrix converter can prolong the system's life. A space-vector-modulation-based soft-switching scheme is proposed for the matrix converter on the grid side and a model-based commutation method is adopted in the current-fed H-bridge on the dc side. With the proposed modulation methods, the soft switching can be realized for all devices in the converter. Finally, a laboratory prototype of the proposed converter has been built to verify the effectiveness of the proposed method experimentally. [ABSTRACT FROM AUTHOR]