Search

Conventional energy resource problems made power system planners apply more renewable energy sources (RESs) in the power system. RESs have a significant impact on fulfilling the world's energy demand, protecting the environment at least in the exploration phase, and providing energy reliability as well as security for the new generation of power grids. In this regard, wind power generation is considered a promising solution. However, by increasing the share of wind power generation units in the power sector, some challenges, such as voltage problems, transient stability, increasing system losses, and line congestions can occur. Consequently, an alternative solution is required to accelerate wind power units' connections to the grid by preventing the problems caused by the penetration of wind power. In this regard, Flexible Alternating Current Transmission Systems (FACTS) devices can play an important role while they can improve power grid dynamic performance. This paper presents a review of the optimization techniques applied to accelerate the penetration of wind energy by exploiting FACTS devices. The topic identifies the objectives and optimization formulations, as well as schemes and models available in the published literature. This survey gives noteworthy insights to the researchers to cover available solutions in these regards. The literature in the field is summarized in different aspects, such as FACTS technology, objective functions, constraints, optimization methods, planning or operation purposes, and load flow types. At each aspect, a comparison is derived to recognize the most important issues. The result of the review is the finding of future work and contributions which can be done in the field of wind energy integration acceleration using FACTS devices and the output of the paper can be used as a guide for researchers to find a new path for research in this area. [ABSTRACT FROM AUTHOR]

This paper presents a framework for the efficient design and evaluation of a standalone hybrid renewable energy system (HRES) to meet the energy requirements of a rural community in the north-eastern region of Nigeria. The proposed microgrid system incorporates solar photovoltaic, wind turbines, biomass gasifier, fuel cell, and Battery storage. The sizing of each component is determined through the utilization of real local meteorological data and the load demand over a year, employing the Levy flight-salp swarm algorithms (LF-SSA). The optimization objective is to minimize the annualized system cost (ASC) of the HRES, while also considering the reliability constraint of Loss of power supply probability (LPSP). The comparative outcomes demonstrate that the LF-SSA surpasses other examined algorithms, namely the salp swarm, genetic algorithm, and HOMER software by achieving substantial cost savings of $29033, $50796, $191771 respectively in relation to the proposed HRES. The result further shows that, the LF-SSA provides the lowest LCOE of $0.933162/kWh, in contrast to SSA at $0.947737/kWh, GA at $0.958660/kWh, and HOMER at $1.075351/kWh. Additionally, the results indicate that the implemented Energy Management System (EMS) has successfully facilitated the establishment of an environmentally friendly and cost-effective energy system. • An efficient energy storage system is essential for managing intermittent energy supply. • The fuel cell can generate DC power by combining hydrogen with oxygen. • The amount of power generated by a PV panel depends on temperature and solar radiation intensity. • Deterministic rule-based controllers operate based on pre-defined rules. • Energy Management System coordinate the flow of power between different components. [ABSTRACT FROM AUTHOR]

Economic, technological, and environmental causes are moving energy toward smart distribution networks. The change from fossil fuels to renewable energy sources is extremely environmentally friendly in both the building and transport sectors. Microgrids could be efficiently used in remote areas utilizing renewable energy resources for supplying different energy demands namely power, heat and cold. This paper presents a mixed-integer linear programming (MILP) model for optimizing planning and sizing decisions in microgrids connected to main grid. Planning decisions the amount of generation of each distributed generation (DG) technology and the amount of power transmission to other nodes. Also, sizing of different DGs including photovoltaic and combined heat and power facilities are performed by the proposed model. According to the results, the model is able to optimize sizing and planning decisions in grid-connected microgrids. [ABSTRACT FROM AUTHOR]

Using renewable energy sources instead of fossil fuels is one of the best solutions to overcome greenhouse gas (GHG) emissions. However, in designing clean power generation microgrids, the economic aspects of using renewable energy technologies should be considered. Furthermore, due to the unpredictable nature of renewable energy sources, the reliability of renewable energy microgrids should also be evaluated. Optimized hybrid microgrids based on wind and solar energy can provide cost-effective power generation systems with high reliability. These microgrids can meet the power demands of the consuming units, especially in remote areas. Various techniques have been used to optimize the size of power generation systems based on renewable energy to improve efficiency, maintain reliability, improve the power grid's resilience, and reduce system costs. Each of these techniques has shown its advantages and disadvantages in optimizing the size of hybrid renewable energy systems. To increase the share of renewable energies in electricity supply in the future and develop these new technologies further, this paper reviews the latest and most efficient techniques used to optimize green microgrids from an economical and reliable perspective to achieve a clean, economical, and highly reliable microgrid. [ABSTRACT FROM AUTHOR]

Edge infrastructures, including edge computing servers, are increasingly powered by renewable energy and smart grid combined. Two-way energy trading allows the surplus or shortfall of renewable energy to be traded between a server and the smart grid, but is non-trivial due to randomly varying computation demands and renewables. This paper proposes a new online policy, namely, distributed online resource allocation and load management (DORL), which enables such an edge server and its serving devices to minimize their energy cost and energy consumption, respectively, in a fully distributed manner. The key idea is that we employ the stochastic dual-subgradient method to interpret the battery of the server as a virtual queue. Based on the virtual queue and task queues, the CPU frequencies of the devices and the edge server, the offloading transmit rates of the devices (to the server) and the energy trading decisions of the server (with the smart grid) are decoupled over time and among devices, and optimized on an ongoing basis. Furthermore, we prove that the DORL yields a feasible and asymptotically optimal solution with a cost-backlog tradeoff of $[\eta, 1/\eta]$. Simulations show that the DORL reduces the system cost by nearly 50%, as compared to existing benchmarks. [ABSTRACT FROM AUTHOR]

Microgrids are one of the best solutions to present energy crisis, where the expansions of distributed networks are not feasible. This is achieved with penetration of renewable energy sources along with suitable selection of Energy Storage Systems (ESS).The load demand can be supported with microgrid in the grid connected mode or autonomous mode by suitable sizing of DGs and BESS. Sizing of suitable ESS in terms of its capacity or discharge helps in shaving the peak demand and also maximizes the benefits related to their use. Various advantages to end-users can be provided by microgrid with ESS, like improvement in energy efficiency, minimizing overall energy consumption through distributed generations (DGs) and increasing reliability of power supply to the customers. All these advantages can be achieved by obtaining the optimal microgrid operating cost with ESS. One of the challenging tasks in Microgrids is obtaining optimal energy utilization of DGs to meet the load demand. This can be achieved through proper energy management in the microgrid by obtaining optimal power allocations of DGs and ESS. This paper presents an algorithm for microgrid operating cost minimization for 24 hrs time horizon with optimal power allocation of DGs considering randomness in DGs, with and without BESS. Accelerated particle swarm optimization (APSO), Jaya optimization (JAYA) technique and Linear programming based interior point algorithm (LP-IP) have been applied to minimize the operating cost of microgrid with optimal Energy management while selecting proper size of BESS. Simulation results obtained by PSO, APSO, JAYA and LP-IP solver based algorithms are compared for BESS size and microgrid operating cost for 24 hrs. Results of LP-IP solver based optimization algorithm are proved to be the most effective of all other algorithms in terms of cost reduction. Optimal sizing of BESS with energy management of DGs and BESS reduces the operating cost of microgrid meeting the load criteria. [ABSTRACT FROM AUTHOR]

Due to increasing amounts of energy being supplied by intermittent renewable energy sources, future energy systems need to be able to react flexibly to sudden changes. To address this challenge, a large body of research is devoted to improving the utilization of energy flexibility of various types of energy resources on the supply and demand side. This is commonly done by applying mathematical models. The objective of this paper is to review such models and identify common modeling approaches used to quantify and optimize the use of flexible energy resources. The literature review is conducted systematically, encompassing 215 publications that feature 694 models of different energy resources. The main distinction of this work, in comparison to other reviews on the topic of energy flexibility lies in its focus on the mathematical formulation of models of energy resources and the quantification of the models' level of detail. The aim is to identify common modeling approaches and the corresponding research problems they address. The review shows that the majority of research efforts are directed towards the management and optimization of distributed energy resources. The most commonly employed modeling approach involves abstract black-box models with limited levels of detail. Linear programming and meta-heuristics are frequently used to optimize energy flexibility. A critical reflection of the current common practice is conducted and recommendations for future research are formulated. [Display omitted] • Literature review of 215 reports presenting model approaches for energy flexibility. • Categories of research problems identified and deduction of two main research focuses. • Presenting models of common energy resources classified into different model types. • Mostly low level of detail seen in modeling energy flexibility. • Optimization models are used to represent and quantify flexibility. [ABSTRACT FROM AUTHOR]

Apart from numerous technical challenges, the transition towards a carbon-neutral energy supply is greatly hindered by limited economic feasibility of renewable energy sources. This results in their slow and bounded penetration in both commercial and residential sectors that are responsible for over 40% of final energy consumption. This paper aims to demonstrate that combined application of sophisticated planning methodologies at building-level and presents incentive mechanisms for renewables that can result in prosumers, featuring hybrid renewable energy systems (HRES), with economic performance comparable to that of conventional energy systems. The presented research enhances existing planning methodologies by integrating appliance-level demand side management into the decision process and investigates its effect on the planning problem. Moreover, the proposed methodology features an innovative and holistic approach that simultaneously assess electrical and thermal domain in both an isolated and grid-connected context. The analyzed hybrid system consists of solar photovoltaic, wind turbine and battery with thermal supply featuring solar thermal collector and a ground-source heat pump. Overall optimization problem is modeled as a mixed-integer linear program, while ranking of all feasible alternatives is made by the multicriteria decision-making algorithm against several technological, economic, and environmental criteria. A real-life scenario of energy system retrofit for a building in the United Kingdom was employed to demonstrate overall cost savings of 12% in the present market and regulation context. [ABSTRACT FROM AUTHOR]