Search

[Display omitted] Benefiting from the extra contribution of O redox, Co-free Li-rich layered oxides (LRNMO) can satisfy the requirement of high specific capacities. However, during the high-voltage charging process, lattice oxygen being oxidized to O− or O 2 leads to a gradual transition of the structure from layered to spinel phase, capacity and voltage decline, hindering the practical application of LRNMO in the lithium-ion battery. Here, a surface modification strategy of Li 1.2 Ni 0.32 Mn 0.48 O 2-δ doped with Ta5+ ions is proposed, in which the Ta5+ ions occupy the lithium sites of the lattice structure on the surface layer of LRNMO and form a Ta 2 O 5 coating layer. The modified electrode exhibits excellent rate performance and cycling stability, with 94.9% and 85.5% capacity retention rate and voltage retention rate, respectively, after 200 cycles at 1C. Moreover, the initial coulomb efficiency and ionic conductivity of the modified electrode are also apparently enhanced. Simultaneously, the decreased Li/Ni mixing degree of the modified electrode reflects the improvement of the structural stability. Therefore, the modification strategy through strong metal–oxygen bonding to integrate the surface structure to regulate the oxygen activity provides a new direction for the design of high energy density Co-free Li-rich cathode materials. [ABSTRACT FROM AUTHOR]

[Display omitted] Benefiting from the extra contribution of O redox, Co-free Li-rich layered oxides (LRNMO) can satisfy the requirement of high specific capacities. However, during the high-voltage charging process, lattice oxygen being oxidized to O− or O 2 leads to a gradual transition of the structure from layered to spinel phase, capacity and voltage decline, hindering the practical application of LRNMO in the lithium-ion battery. Here, a surface modification strategy of Li 1.2 Ni 0.32 Mn 0.48 O 2-δ doped with Ta5+ ions is proposed, in which the Ta5+ ions occupy the lithium sites of the lattice structure on the surface layer of LRNMO and form a Ta 2 O 5 coating layer. The modified electrode exhibits excellent rate performance and cycling stability, with 94.9% and 85.5% capacity retention rate and voltage retention rate, respectively, after 200 cycles at 1C. Moreover, the initial coulomb efficiency and ionic conductivity of the modified electrode are also apparently enhanced. Simultaneously, the decreased Li/Ni mixing degree of the modified electrode reflects the improvement of the structural stability. Therefore, the modification strategy through strong metal–oxygen bonding to integrate the surface structure to regulate the oxygen activity provides a new direction for the design of high energy density Co-free Li-rich cathode materials. [ABSTRACT FROM AUTHOR]

• Construct Mn 3 O 4 protective shell to alleviate Jahn-Teller distortion. • Oxygen vacancy can effectively restrain the release of oxygen. • The designed LRNMO@Mn 3 O 4 cathode has higher electron/ion conductivity. • The Mn 3 O 4 -coated electrode exhibited excellent cycle stability. Herein, we put forward a feasible interfacial modification strategy in virtue of Mn 3 O 4 surface coating to construct protective shell and alleviate Jahn-Teller distortion during the charge/discharge process. It has been found that the increase of the oxygen vacancy on the surface of Li 1.2 Ni 0.27 Mn 0.54 O 2 of (LRNMO) after Mn 3 O 4 protective layer modification can effectively restrain the release of oxygen and enhancing rate capability, and thus improving its comprehensive electrochemical performances. In particular, the initial coulombic efficiency of the optimized LRNMO-1 electrode is improved from 72.3% to 84.3%. The capacity retention rate is up to 95.6% at 250 mA g−1 (1C) after 200 cycles. In addition, the LRNMO-1 electrode also has a good capacity retention rate (96.4% after 100 cycles) at a high current density of 5C. Moreover, the designed LRNMO@Mn 3 O 4 cathode exhibits higher ionic conductivity and better interface stability. As a result, this work offers a practicable and valuable exploration for the development and industrialization of Co-free Li-rich Mn-based cathode materials with high energy density. [ABSTRACT FROM AUTHOR]

• Activated carbon nanotubes (ACNTs) possess plentiful active sites. • ACNTs as conductive support to deposit NiS and alleviate particles agglomeration. • The nanostructured NiS/ACNTs composite possesses outstanding performances. • The effects of electrolyte concentration on the NiS/ACNTs electrode are studied. • The NiS/ACNTs//AC ASCs delivers high energy density and power density. [Display omitted] Hexagonal nickel sulfide is extensively studied and used for supercapacitors due to its high theoretical specific capacitance (1060 F g−1), simple synthesis craft and low cost. However, the poor electrical conductivity and easy agglomeration severely restrict its practical application. Herein, we design the composite materials of the nickel sulfide nanoparticles and activated carbon nanotubes (NiS/ACNTs) with plentiful active group by hydrothermal method and subsequent annealing treatment, thus effectively inhibiting the agglomeration of NiS nanoparticles and producing good supercapacitor behaviors. Benefiting from the superiority of composite structure, the NiS/ACNTs hybrid electrode delivers a high specific capacitance of 1266 F g−1 at a current density of 1.0 A g−1 and sustains a capacitance value of 1028 F g−1 at 10 A g−1 (81% of initial specific capacitance). Moreover, the asymmetric supercapacitors (ASCs) with NiS/ACNTs cathode and activated carbon (AC) anode exhibit a high energy density of 36.0 Wh kg−1 at a power density of 806 W kg−1 and a good capacitance retention of 83% after 2000 cycles at 2.0 A g−1. Therefore, the combination of the battery-type materials and carbon materials will a significant exploration to solve particle agglomeration and develop the high electrochemical performance ASCs. [ABSTRACT FROM AUTHOR]

• Polypyrrole coating is utilized for polysulfides immobilization. • Lithium sulfide is wrapped inside cathode from exposure. • Activation barrier and polysulfides shuttle are greatly suppressed. • Electrochemical performances of as-prepared cells are promoted. The significantly-high theoretical energy density and eco-sustainability of lithium sulfur batteries (LSBs) arouses a rapid surge of interest in recent years. However, some key issues of cathode, for instance, the polysulfides confinement, low ion/electrons transfer and etc., hinder the practical utilization of LSBs. Herein, such issues could be carefully handled by using the conductive polypyrrole as polysulfides wrapper. The polypyrrole with pyrrole rings can efficiently confine polysulfides inside cathode for redox. Meanwhile, the conductive polypyrrole with delocalized π-electron cloud can facilitate electrons transfer. Besides, the addition of carbon nanotube (CNT) and oxidized graphene (GO) can enhance the conductivity of cathode material. As a result, the Li 2 S/CNT/GO/PPy cathode delivers a cycling capacity of 525 mAh g−1 with a low-capacity decay rate of 0.065 % cycle−1 after 400 cycles. Therefore, the lithium-sulfur battery with Li 2 S-based and PPy-wrapped cathode could reasonably be counted as a potential alternative of long-cycling Li-ion cells. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • An ultralow-potential H 2 Ti 3 O 7 ·xH 2 O anode is first introduced for zinc-ion batteries. • The storage mechanism of H+ and Zn2+ co-insertion is demonstrated on the H 2 Ti 3 O 7 ·xH 2 O anode. • The H 2 Ti 3 O 7 ·xH 2 O anode features excellent electrochemical performance. • The assembled Zn x MnO 2 //H 2 Ti 3 O 7 ·xH 2 O full battery exhibits the high output voltage. Developing the alternative anode materials that can completely resolve the dendrite concern of Zn metal anodes are desirable for reliable aqueous zinc-ion batteries. However, the sub-optimal charging potentials of reported anodes inevitably cause the discounted output voltage and energy density on a zinc-ion full battery. Herein, it is firstly demonstrated that the hydrated titanic acid (H 2 Ti 3 O 7 ·xH 2 O) can be applied as an ultralow-potential anode for the aqueous zinc-ion full battery. The depressed potential (0.2 V vs. Zn2+/Zn) of the H 2 Ti 3 O 7 ·xH 2 O compared to that of reported candidates could significantly enhance the operating voltage level of the zinc-ion full battery. Furthermore, the comprehensive analyses demonstrate that the expanded lattice spacings and interlayer crystal water stimulate Zn2+ along with H+ to jointly insert and extract on the H 2 Ti 3 O 7 ·xH 2 O anode. The low-potential H 2 Ti 3 O 7 ·xH 2 O anode exhibits an impressive cycling performance and coulombic efficiency by virtue of the assistance from interlayer crystal water. The assembled Zn x MnO 2 //H 2 Ti 3 O 7 ·xH 2 O zinc-ion full battery delivers the decent electrochemical performance, especially a high output voltage of over 1 V. This low-potential, high-stable H 2 Ti 3 O 7 ·xH 2 O anode reveals the exceptional potential for aqueous zinc-ion full batteries. [ABSTRACT FROM AUTHOR]