Search

A hybrid Schottky–ohmic drain technology for millimeter-wave (mmW) AlGaN/GaN high-electron-mobility transistors (HEMTs) is proposed. The Schottky metal extension in the ohmic region of drain reduces the actual source–drain spacing, resulting in a smaller ON-resistance and a higher maximum current. Extended Schottky metal in the drain region modulates the electric-field distribution, thereby leading to an improved breakdown voltage, suppressed current collapse, and high reliability. Compared with the ohmic drain, the current gain cutoff frequency (${f}_{T}$) was improved from 64 to 76 GHz, and the maximum oscillation frequency (${f}_{\text {max}}$) was improved from 125 to 157 GHz, resulting from the decreased parasitic drain resistance (${R}_{d}$). Moreover, large-signal measurements in continuous wave (CW) at 30 GHz demonstrated a peak power-added efficiency (PAE) of 45.5% and a saturated output power density (${P}_{\text {sat}}$) of 8.5 W/mm at ${V}_{\text {ds}}= {30}$ V. In addition, the direct current (DC) and radio frequency (RF) characteristics showed a negligible degradation after large-signal measurements at 30 GHz. [ABSTRACT FROM AUTHOR]

AlGaN/GaN high-electron-mobility transistors (HEMTs) with Si-rich SiN/Si3N4 bilayer passivation were studied in this article. The use of a Si-rich SiN interlayer leads to improved channel transport property, current collapse, power performance, and temperature-dependent stability. Devices without Si-rich SiN interlayer passivation exhibit an increase in the gate leakage current by over three orders of magnitudes with temperature increasing from 300 to 420 K, leading to an increase in a current collapse from 9.7% to 24.7%, while the devices with Si-rich SiN passivation exhibit a weak temperature dependence of leakage current and a constant current collapse about 5%. Small signal characterization shows that Si-rich SiN passivation results in a remarkable decrease in the effective gate length by ~15% with temperature up to 420 K. At 17 GHz, devices with Si-rich SiN interlayer passivation exhibit an output power density of 7 W/mm and a peak power-added efficiency (PAE) of 56%. The improved power performance of devices using Si-rich SiN interlayer passivation is attributed to the suppressed current collapse and superior device stability under high channel temperature. [ABSTRACT FROM AUTHOR]

To realize the complementary circuit on the GaN-on-Si platform, an investigation of p-channel heterostructure field-effect transistors (p-HFETs) is necessary. In this study, an analytical model for the estimation of the threshold voltage (${V}_{\text {TH}}$) for GaN-based p-HFETs was developed. In this model, the impact of polarization charges at different interfaces, the influence of interface charges at oxide/GaN interface, as well as the out-diffusion effect of Mg dopant in the p-GaN layer were all taken into consideration for systematic exploration. Herein, GaN-based p-HFETs were fabricated to verify the relationship between the ${V}_{\text {TH}}$ and the thickness of the GaN channel layer by using the proposed model. The ${V}_{\text {TH}}$ model was further confirmed through TCAD simulations. The influences of the thickness of oxide layer, Mg doping concentration in p-GaN layer, and the Al mole fraction of AlxGa $_{{1}-{x}}\text{N}$ layer on ${V}_{\text {TH}}$ were also discussed in detail. The model serves as more accurate guidance for the optimization of such p-HFETs design and complementary circuits. [ABSTRACT FROM AUTHOR]

The submicrometer gate HEMT is fabricated with an ultrathin-barrier (UTB) AlGaN/gallium nitride (GaN) combined with in situ SiN passivation. The sheet resistance of the UTB Al0.2Ga0.8N (4 nm)/GaN heterostructure is effectively reduced by the SiNx passivation layer grown by metal organic chemical vapor deposition (MOCVD), from 6500 to $312~ \Omega $ /⬜. With the 20-nm stress-engineered in situ SiN, the device not only provides a large output current of 1.05 A/mm but also demonstrates promising potential on the RF applications, which gives AlGaN material two records high cutoff frequency ${f} _{\text {T}}/{f} _{\text {max}}$ of 157 GHz/334 GHz for 100-nm gated device and 211 GHz/379 GHz for 70-nm gated device. During the continuous wave (CW) power measurement at 30 GHz, the 70-nm devices exhibit a large output power of 4.6 W/mm associated with a peak power-added efficiency (PAE) of 48.1% and a gain of 11.6 dB (${V} _{\text {ds}} =20$ V), and a high PAE of 53.8% with an output power density of 1.9 W/mm and a gain of 10.8 dB (${V} _{\text {ds}} =10$ V), respectively. The huge potential of the UTB-AlGaN/GaN is demonstrated for high-frequency and large-output power applications when it is combined with the in situ SiN, which is necessary for future communication systems. [ABSTRACT FROM AUTHOR]

The gate and drain bias dependence of hot electron-induced degradation in GaN-based metal–insulator–semiconductor high electron mobility transistors (MIS-HEMTs) was investigated in this work. Devices exhibit an abnormal increase in peak transconductance (${G}_{m}$ ,max) during hot carrier stress (HCS) and a partially quick recovery of that after removing the electrical stress. A physical model is proposed to explain the abnormal electrical characteristics caused by HCS. By using density functional theory (DFT), we calculated the energy for electrons to dehydrogenate preexisting [NGaH3]−1 complexes in GaN layer during stress. The dehydrogenation of defects affects the Gm,max of devices. Meanwhile, the neutralization of donor traps in AlGaN barrier layer also plays a significant role in the increase of Gm,max and the detrapping effect of electrons from these traps after removing the electrical stress accounts for the partially quick recovery of ${G}_{m, \text{max}}$. [ABSTRACT FROM AUTHOR]

In this article, we report on the effective transconductance (gm) and gain linearity improvement of submicrometer gate AlN-barrier-based transistors using GaN/InGaN coupling-channel structures. The fabricated AlN/GaN/InGaN coupling-channel high electron mobility transistor (CC-HEMT) showed flat gm profile, greatly reduced gm derivatives, and constant dynamic source resistance compared with an AlN/GaN HEMT using the same fabrication process. The highest extrinsic current gain cutoff frequency (ƒT) of 55 GHz and the maximum oscillation frequency (ƒmax) of 80 GHz were obtained for 0.15- μm gate-length transistors, both of which remain constant values across wide input voltage (VGS) of 4 V. Moreover, a significant theoretical OIP3 value boost by 7.1 dB has been observed using the CC-HEMT as compared to the AlN/GaN HEMT. The superior linearity performance of the CC-HEMT can be attributed to the strong channel-to-channel coupling effect. The drain bias-dependence of gm, ƒT, and ƒmax versus VGS profiles illustrate that the linearity characteristics of the CC-HEMT greatly improve with an increase in VDS. These results demonstrate the AlN/GaN/InGaN material system as a viable platform for high frequency requiring high-linearity applications. [ABSTRACT FROM AUTHOR]