Search

This study investigates the effects of incorporating MgO into magnesium–calcium (Mg-Ca) alloy composites and subjecting them to the equal channel angular pressing (ECAP) process on the resulting mechanical and corrosive properties, as well as biocompatibility. Initially, the incorporation of MgO into the Mg-Ca alloy composites did not yield significant improvements in grain refinement, tensile strength, or corrosion rate reduction, despite exhibiting improved biocompatibility. However, upon subjecting the Mg-Ca-MgO alloy composites to the ECAP process, noteworthy outcomes were observed. The ECAP process resulted in substantial grain refinement, leading to significant improvements in tensile strength. Furthermore, a marked decrease in corrosion rate was observed, indicating enhanced corrosion resistance. Additionally, the biocompatibility of the Mg-Ca-MgO alloy composites improved after undergoing the ECAP process. These findings highlight the synergistic effect of incorporating MgO and employing the ECAP process, providing valuable insights into the development of advanced magnesium-based materials with superior mechanical properties, reduced corrosion rates, and improved biocompatibility. [ABSTRACT FROM AUTHOR]

AZ61 magnesium alloy metal matrix composites (MMCs) with different weight percentages (0, 1 and 2) of micro-silicon carbide particles (SiCp) were fabricated using stir casting method. Effects of SiCp on the microstructural distributions, mechanical and fatigue properties, and fracture surfaces have been investigated. The microstructural observations of as-cast MMCs unveil the existence of primary α-Mg phase and the presence of large amount of β-Mg17Al12 secondary phase at grain boundary. The specimens are subjected to homogenization heat treatment at 410 °C for 24 h; the β-Mg17Al12 phases are significantly dissolved in the matrix grain boundaries which enhance the ductility and decrease the hardness compared with the as-cast materials. The addition of SiCp reinforcement led to improved yield strength (YS) and ultimate tensile strength (UTS) of AZ61/SiCp composite compared to the unreinforced alloy. The maximum values of YS and UTS have been attained at AZ61/1wt%SiCp composites. The enhancement of YS and UTS was due to the presence of a uniformly distributed reinforced SiCp, which depends on grain refinement of the matrix and strong interfacial bonding between the matrix and reinforcement. In the case of fatigue test results, the addition of SiCp reduced the fatigue life and strength of AZ61 alloy composite. However, addition of 1wt%SiCp showed good mechanical and fatigue properties compared to pure AZ61 magnesium alloy and AZ61/2wt%SiCp composite. Furthermore, the effects of addition of SiCp on the mechanical and fatigue properties of the composite were confirmed by using the scanning electron microscope observation of fracture surfaces. [ABSTRACT FROM AUTHOR]