Search

This paper aims at (a) improving the vertical velocity distribution in the wake of a rising isolated bubble for isothermal water layers and (b) evaluating the proposed distribution for thermally stratified therminol layers before and after the initiation of vortex shedding. To address these objectives, numerical investigations are performed, for the rise of an isolated bubble in isothermal and thermally stratified liquid layers, with a combination of the monotonic upwind scheme for conservation laws and pressure implicit with splitting of operators numerical scheme. The analysis revealed that the vertical velocity in the wake of a rising isolated bubble, for isothermal and thermally stratified liquid layers, differs remarkably from the Gaussian distribution. Based on the detailed investigations, region-wise wake velocity distribution comprising a linear superposition of Gaussian approximation with Burr distribution is proposed. Furthermore, this distribution is utilized to predict the rise velocity for a chain of bubbles having different frequencies of departure. Thus, the findings will be useful for the design of heat exchangers or cooling devices, which rely on the heat transfer augmentation with rising air bubbles from a heated surface for isothermal (buoyancy suppressed) and thermally stratified (buoyancy assisted) liquid layers. [ABSTRACT FROM AUTHOR]

Nanoparticle shape strongly affects the thermal-hydraulic behavior of nanofluid-enhanced single-phase natural circulation loop (SPNCL) but is yet to be explored experimentally. Hence, various mono/hybrid nanofluids having dissimilar shaped nanoparticles (Al 2 O 3 +Water, Al 2 O 3 +CuO + Water, Al 2 O 3 +SiC + Water, Al 2 O 3 +MWCNT + Water) with a 0.1% volume concentration, are used in SPNCL to investigate mass flow rate (MFR), heat exchanger effectiveness (HEE) and total entropy generation rate (TEGR). The effect of power input, coolant inlet temperature and loop inclination (both counter-clockwise and clockwise) on transient and steady-state performances are presented. The result reveals that mono/hybrid nanofluid shows enhanced HEE and lower TEGR as compared to base fluids, whereas the MFR may increase or decrease since the performance of SPNCL is significantly impacted by the nanoparticle's shape. Spherical-shaped nanoparticle-dispersed nanofluids show early flow initiation and higher MFR than cylindrical-shaped nanoparticle-dispersed nanofluids. MFR and TEGR rise with higher power input, whereas HEE declines for all working fluids. MFR and TEGR increase as the coolant inlet temperature rises, whereas HEE decreases for all working fluids. The loop inclination decreases the MFR, while it increases the HEE and TEGR. The Counter-clockwise inclination of the loop shows a higher MFR than the clockwise inclination at the same angle of inclination. • Hybrid nanofluids having dissimilar shaped particles are used in natural circulation loop. • Mass flow rate, heat exchanger effectiveness and entropy generation rate are evaluated. • Effect of power input, coolant inlet temperature and loop inclination are investigated. • Spherical-shaped shows early flow initiation and higher flow rate than cylindrical-shaped. • Counter-clockwise inclination shows higher mass flow rate than the clockwise inclination. [ABSTRACT FROM AUTHOR]