Search

The significance of fuzzy volume percentage on the unsteady flow of MHD tangent hyperbolic fuzzy hybrid nanofluid towards an exponentially stretched surface is scrutinized. The heat transport mechanism is classified by Joule heating, nonlinear thermal radiation, boundary slippage, and convective circumstances. Ethylene glycol (EG) as a host fluid along with the nanomaterial's Cu and Al 2 O 3 are used for heat transfer analysis is also considered in this investigation. The nonlinear governing PDEs are meant to be converted into ODEs employing appropriate renovations. Then, a built-in MATLAB program bvp4c is employed to acquire the outcome of the given problem. The variation of flow rate, thermal heat, drag force and Nusselt number and their influence on fluid flow with heat transfer have been scrutinized through graphs. An increase in thermal radiation, power law index and nanoparticle volume friction heightens the heat transmission rate. Skin friction is diminished by swelling the power-law index, Weissenberg number, and ratio parameters, whereas it is increased by enhancing the magnetic parameter. The heat transfer rate upsurges with an increase in Weissenberg number and nanoparticle volume fraction. Also, the nanoparticle volume percentage is expressed as a triangular fuzzy number (TFN). The triangular membership function (MF) and TFN are regulated by the χ - cut parameter, which has a range of 0 to 1. In comparison to nanofluids, hybrid nanofluids have a higher heat transmission rate, according to the fuzzy analysis. This investigation has applications in the areas of paper manufacturing, metal sheet cooling and crystal growth. [ABSTRACT FROM AUTHOR]

This contribution aims to optimize nonlinear thermal flow for Darcy-Forchheimer Maxwell fuzzy Al 2 O 3 + Cu + TiO 2 /EO tri-hybrid nanofluid flow across a Riga wedge in the context of boundary slip. Three types of nanomaterials, Al 2 O 3 , Cu and TiO 2 have been mixed into the basic fluid known as engine oil. Thermal properties with the effects of porous surface and nonlinear convection have been established for the particular combination Al 2 O 3 + Cu + TiO 2 /EO. Applying a set of appropriate variables, the set of equations that evaluated the energy and flow equations was transferred to the dimensionless form. For numerical computing, the MATLAB software's bvp4c function is used. The graphical display is used to demonstrate the influence of several influential parameters. It has been observed that flow rate decay with expansion in porosity parameter and nanoparticles volumetric fractions. In contrast, it rises with wedge angle, Grashof numbers, Darcy-Forchheimer, nonlinear Grashof numbers, and Maxwell fluid parameter. Thermal profiles increase with progress in the heat source, nanoparticles volumetric fractions, viscous dissipation, and nonlinear thermal radiation. The percentage increases in drag force for ternary hybrid nanofluid are 13.2 and 8.44 when the Modified Hartmann number takes input in the range 0.1 ≤ Mh ≤ 0.3 and wedge angle parameters 0.1 ≤ m ≤ 0.3 . For fuzzy analysis, dimensionless ODEs transformed into fuzzy differential equations and employed symmetrical triangular fuzzy numbers (TFNs). The TFN makes a triangular membership function (M.F.) that describes the fuzziness and comparison. This study compared nanofluids, hybrid nanofluids, and ternary nanofluids through triangular M.F. The boundary layer flow caused by a wedge surface plays a crucial role in heat exchanger systems and geothermal. [ABSTRACT FROM AUTHOR]

In nature, symmetry is all around us. The symmetry framework represents integer partial differential equations and their fractional order in the sense of Caputo derivatives. This article suggests a semi-analytical approach based on Aboodh transform (A T) and the homotopy perturbation scheme (HPS) for achieving the approximate solution of time-fractional porous media and heat transfer equations. The A T converts the fractional problems into simple ones and obtains the recurrence relation without any discretization or assumption. This nonlinear recurrence relation can be decomposed via the use of the HPS to obtain the iterations in terms of series solutions. The initial conditions play an important role in determining the successive iterations and yields towards the exact solution. We provide some numerical applications to analyze the accuracy of this proposed scheme and show that the performance of our scheme has strong agreement with the exact results. [ABSTRACT FROM AUTHOR]

Nanofluids are advanced class of heat transfer fluids that are in trend due to their high thermophysical properties over the past two decades. However, there are some limitations and restrictions that are needed to be removed before nanofluids can be commercialized. The main issues are the low stability and shelf life of such fluids which mask the potential usage of nanofluids in applications such as oil recovery, heat exchangers, drug delivery and lubricant. Hence, challenging task of stabilizing the nanofluid is key concern in capitalizing the nanofluids. In this study, the aim is to explore the previous literature related to stability and thermophysical properties of nanofluid for better understanding. [ABSTRACT FROM AUTHOR]

This investigation presents the fuzzy nanoparticle volume fraction on heat transfer of second-grade hybrid 2 3 Al O +Cu/EO nanofluid over a stretching/shrinking Riga wedge under the contribution of heat source, stagnation point, and nonlinear thermal radiation. Also, this inquiry includes flow simulations using modified Hartmann number, boundary wall slip and heat convective boundary condition. Engine oil is used as the host fluid and two distinct nanomaterials (Cu and 2 3 Al O) are used as nanoparticles. The associated nonlinear governing PDEs are intended to be reduced into ODEs using suitable transformations. After that 'bvp4c,' a MATLAB technique is used to compute the solution of said problem. For validation, the current findings are consistent with those previously published. The temperature of the hybrid nanofluid rises significantly more quickly than the temperature of the second-grade fluid, for larger values of the wedge angle parameter, the volume percentage of nanomaterials. For improvements to the wedge angle and Hartmann parameter, the skin friction factor improves. Also, for the comparison of nanofluids and hybrid nanofluids through membership function (MF), the nanoparticle volume fraction is taken as a triangular fuzzy number (TFN) in this work. Membership function and σ-cut are controlled TFN which ranges from 0 to 1. According to the fuzzy analysis, the hybrid nanofluid gives a more heat transfer rate as compared to nanofluids. Heat transfer and boundary layer flow at wedges have recently received a lot of attention due to several metallurgical and engineering physical applications such as continuous casting, metal extrusion, wire drawing, plastic, hot rolling, crystal growing, fibreglass and paper manufacturing. [ABSTRACT FROM AUTHOR]

In this work, the heat transfer features and stagnation point flow of Magnetohydrodynamics (MHD) hybrid second-grade nanofluid through a convectively heated permeable shrinking/stretching sheet is reported. The purpose of the present investigation is to consider hybrid nanofluids comprising of Alumina Al 2 O 3 and Copper Cu nanoparticles within the Sodium Alginate (SA) as a host fluid for boosting the heat transfer rate. Also, the effects of free convection, viscous dissipation, heat source/sink, and nonlinear thermal radiation are considered. The converted nonlinear coupled fuzzy differential equations (FDEs) with the help of triangular fuzzy numbers (TFNs) are solved using the numerical scheme bvp4c. The numerical results are acquired for various engineering parameters to study the Nusselt number, skin friction coefficient, velocity, and temperature distribution through figures and tables. For the validation, the current numerical results were found to be good as compared to existing results in limiting cases. It is also inspected by this work that with the enhancement of the volume fraction of nanoparticles, the heat transfer rate also increases. So, it may be taken as a fuzzy parameter for a better understanding of fuzzy variables. For the comparison, the volume fraction of nanofluids and hybrid nanofluid are said to be TFN [0, 0.1, 0.2]. In the end, we can see that fuzzy triangular membership functions (MFs) have not only helped to overcome the computational cost but also given better accuracy than the existent results. Finding from fuzzy MFs, the performance of hybrid nanofluids is better than nanofluids. [ABSTRACT FROM AUTHOR]

The slug flow in a superhydrophobic microchannel with a T-junction was studied computationally. The continuous phase passed through the main channel while the dispersed phase1 through the side channel. The volume of fluid (VOF) was employed to track the interface to study the dynamics of slug flow. First, a mesh independence study was carried out to select the optimum mesh by comparison of CFD results with experimental data. The developed model of microchannel was used to study slug flow heat transfer enhancement for micro cooling of electronic chips. The constant heat flux was applied on the walls of the microchannels and the axial wall temperature profile was noted. Upon quantification of heat transfer augmentation in terms of wall temperature reduction, Nusselt number and heat transfer coefficient enhancement, it was noted that slug flow performed much better vis-à-vis single-phase flows at similar conditions. [ABSTRACT FROM AUTHOR]

The prime objective of the current study is to examine the effects of third-grade hybrid nanofluid with natural convection utilizing the ferro-particle Fe 3 O 4 and titanium dioxide TiO 2 and sodium alginate (SA) as a host fluid, flowing through vertical parallel plates, under the fuzzy atmosphere. The dimensionless highly nonlinear coupled ordinary differential equations are computed adopting the bvp4c numerical approach. This is an extremely effective technique with a low computational cost. For validation, it is found that as the volume fraction of Fe 3 O 4 + TiO 2 hybrid nanoparticles rises, so does the heat transfer rate. The current and existing results with their comparisons are shown in the form of the tables. The present findings are in good agreement with their previous numerical and analytical results in a crisp atmosphere. The nanoparticles volume fraction of Fe 3 O 4 and TiO 2 is taken as uncertain parameters in terms of triangular fuzzy numbers (TFNs) [0, 0.05, 0.1]. The TFNs are controlled by α − cut and the variability of the uncertainty is studied through triangular membership function (MF). [ABSTRACT FROM AUTHOR]