Search

This research investigates the two different hybrid nanofluid flows between two parallel plates placed at two different heights, y 0   and y h , respectively. Water-based hybrid nanofluids are obtained by using A l 2 O 3 , T i O 2 and C u as nanoparticles, respectively. The upper-level plate is fixed, while the lower-level plate is stretchable. The fluid rotates along the y-axis. The governing equations of momentum, energy and concentration are transformed into partial differential equations by using similarity transformations. These transformed equations are grasped numerically at MATLAB by using the boundary value problem technique. The influence of different parameters are presented through graphs. The numerical outcomes for rotation, Nusselt, Prandtl, and Schmidt numbers are obtained in the form of tables. The heat transfer rate increases by augmentation in the thermophoresis parameter, while it decays by increasing the Reynolds number. Oxide nanoparticles hybrid nanofluid proved more efficient as compared to mixed nanoparticles hybrid nanofluid. This research suggests using oxide nanoparticles for good heat transfer. [ABSTRACT FROM AUTHOR]

Thermal heat generation and enhancement have been examined extensively over the past two decades, and nanofluid technology has been explored to address this issue. In the present study, we discuss the thermal heat coefficient under the influence of a rotating magneto-hydrodynamic hybrid nanofluid over an axially spinning cone for a prescribed wall temperature (PWT) case. The governing equations of the formulated problem are derived by utilizing the Rivlin–Ericksen tensor and boundary layer approximation (BLA). We introduce our suppositions to transform the highly non-linear partial differential equations into ordinary differential equations. The numerical outcomes of the problem are drafted in MATLAB with the of help the boundary value problem algorithm. The influences of several study parameters are obtained to demonstrate and analyze the magneto-hydrodynamic flow characteristics. The heat and mass transfer coefficients increase and high Nusselt and Sherwood numbers are obtained with reduced skin coefficients for the analyzed composite nanoparticles. The analyzed hybrid nanofluid (SWCNT-Ag–kerosene oil) produces reduced drag and lift coefficients and high thermal heat rates when compared with a recent study for SWCNT-MWCNT–kerosene oil hybrid nanofluid. Maximum Nusselt (Nu) and Sherwood (Sh) numbers are observed under a high rotational flow ratio and pressure gradient. Based on the results of this study, we recommend more frequent use of the examined hybrid nanofluid. [ABSTRACT FROM AUTHOR]

In this exploration, temperature-dependent Yamada–Ota and Xue hybrid nanoliquid models are investigated over a curved stretchable surface embedded in an absorbent media. Hybrid nanofluids are formed by the combination of single and multi-walled carbon nanotubes (CNTs) as nanoparticles with engine oil as base fluid. The goal of this study is to interpret how the modified Fourier law combined with temperature-dependent thermal conductivity, Newtonian heating and variable heat source/sink enhances thermal performance. A mathematical formulation of the problem is illustrated in the curvilinear coordinates. Highly nonlinear dimensionless ODEs are solved numerically by engaging the bvp4c approach. The impression of the key parameters is illustrated graphically. Drag force coefficient and Nusselt number are highlighted through tables. It is comprehended that the fluid velocity decays on augmenting the velocity slip parameter while elevates on amplifying the curvature parameter. Furthermore, an enhancement in the temperature field is noted for the conjugate parameter. A significant correlation with the existing outcomes is perceived when a comparison with the existing literature is made. [ABSTRACT FROM AUTHOR]

Hybrid nanofluids (HNF) are the advanced form of nanofluids used for improved heat transfer purposes. Taking this point in mind, the objective of the presented endeavor is to examine the Yamada–Ota HNF flow model comprising (gold–silver/engine oil) over a stretched cylindrical surface and a sheet (as a limiting case) in a permeable medium. The novelty of this research is the consideration of the surface-catalyzed reaction along with the homogeneous–heterogeneous reactions to accelerate the chemical reactions in the shortest possible time. The heat transport phenomenon is strengthened with the support of Joule heating, heat absorption/generation, and the convective heat boundary condition at the surface of the cylinder. The obtained ordinary differential equations are reduced from the partial differential equations using boundary layer theory and are numerically computed using the Keller box method. It is witnessed that for varied estimates of the magnetic parameter, the thermal profile enhances while the velocity field reduces. It is also noted that the fluid concentration is reduced when the surface-catalyzed parameter is enhanced. The validation of the envisioned model in a limiting case is also added to this investigation. [ABSTRACT FROM AUTHOR]

There are various implementations of common fluids in industrial and chemical processes. With the cooperation of the nanoparticles, the lower thermal properties of such fluids can be augmented. By using a new kind of nanofluid namely hybrid nanofluid, the heat transfer rate of such fluids can be boosted more quickly. The main intention of this research is on entropy analysis in the stagnant point flow of a hybrid nanofluid. The mixed convection nonlinear thermal radiative flow on a stretchable vertical sheet is examined under the influences of the induced magnetic field and chemical reactions. The impacts of Joule heating, partial slips and viscous dissipation are also involved. After the execution of the appropriate similarity transformations, the constituting equations of the flow problem emerge as the nonlinear dimensionless setup of ordinary differential equations. An amplification is examined in the velocity field, entropy generation, and induced magnetic field relative to the mixed convection parameter. With the improved Brinkman number, an augmentation is developed in the entropy of the system. Moreover, both the heat transfer rate and the surface drag force exhibit an accelerating behavior relative to the mixed convection parameter. [ABSTRACT FROM AUTHOR]

Lately, a new class of nanofluids, namely hybrid nanofluids, has been introduced that performs much better compared with the nanofluids when a healthier heat transfer rate is the objective of the study. Heading in the same direction, the present investigation accentuates the unsteady hybrid nanofluid flow involving CuO, Al2O3/C2H6O2 achieved by an oscillating disk immersed in the porous media. In a study of the homogeneous and heterogeneous reactions, the surface catalyzed reaction was also considered to minimize the reaction time. The shape factors of the nanoparticles were also taken into account, as these play a vital role in assessing the thermal conductivity and heat transfer rate of the system. The assumed model is presented mathematically in the form of partial differential equations. The system is transformed by invoking special similarity transformations. The Keller Box scheme was used to obtain numerical and graphical results. It is inferred that the blade-shaped nanoparticles have the best thermal conductivity that boosts the heat transfer efficiency. The oscillation and surface-catalyzed chemical reactions have opposite impacts on the concentration profile. This analysis also includes a comparison of the proposed model with a published result in a limiting case to check the authenticity of the presented model. [ABSTRACT FROM AUTHOR]