Search

One feasible solution to reduce the cost of concentrated solar power is to employ a higher temperature and efficiency supercritical carbon dioxide Brayton power cycle. An alternative heat transfer medium and thermal energy storage (TES) system therefore needs to be explored. This work considered a variety of phase change materials (PCMs) and graphite as the storage media in four indirect shell-and-tube storage configurations, including a 3-PCM and 5-PCM cascade storage, a PCM-graphite-PCM hybrid storage and a single graphite storage. The sizing and design of the TES systems were performed by using a dynamic cycling methodology based on a transient 2D numerical model. The cost of those designs were then determined by using an economic model developed inhouse. This work also investigates the impact of some geometric parameters and cost assumptions on the techno-economic performance of the TES system. The analysis suggests a scenario exists whereby a low thermal efficiency storage system which therefore utilises less tube or storage material could be more cost-effective. Overall, the cost of hybrid TES is the lowest among all studied systems, at $26.96/kWh t and $21.49/kWh t for charging temperature of 720 °C and 750 °C, respectively, followed by the 5-PCM storage at $28.06/kWh t and $21.82/kWh t , respectively. [Display omitted] [ABSTRACT FROM AUTHOR]

Demand for high temperature storage is on a high rise, particularly with the advancement of circular economy as a solution to reduce global warming effects. Thermal energy storage can be used in concentrated solar power plants, waste heat recovery and conventional power plants to improve the thermal efficiency. Latent thermal energy storage systems using phase change materials are highly thought for such applications due to their high energy density as compared to their sensible heat counterparts. This review, therefore, gives a summary of major factors that need to be assessed before an integration of the latent thermal energy system is undertaken. In addition, challenges faced when constructing and experimenting with the storage systems are mentioned. Finally, an insight on the cost analysis and the general performance metrics of the latent thermal energy storage systems is provided before conclusions are drawn. • High temperature phase change materials for CSP thermal energy storage. • Phase change materials in CSP plants. • Challenges in building LTES systems. • TES sizing and effectiveness. [ABSTRACT FROM AUTHOR]

Latent heat thermal energy storage, by using phase change materials (PCMs), is considered as a promising technology that can be integrated into concentrated solar power (CSP) applications to mitigate the load and electricity supply. Multiple PCMs connected in series has attracted considerable research attention as this configuration has the potential to improve the thermal performance compared to single PCM storage. However, this technology has not yet been deployed in commercial CSP plants. One of the major restrictions is the lack of reliable thermophysical property data for high temperature PCMs. This study gives a broad review of the experimentally verified PCMs with melting temperatures from approximately 500 °C–700 °C, applicable to CSP systems. A further twelve PCM candidates, containing low-cost sodium and/or potassium salts, were identified in this study and their thermophysical properties were experimentally evaluated. It was found that nine of the new candidates can be used as PCMs. • Experimentally verified PCMs with melting points of 500 °C–700 °C were reviewed. • 12 potentially low-cost PCM candidates were identified from the literature. • PCMs were experimentally characterised by using the DSC and TGA. • 9 out of 12 candidates are suitable as PCMs. • The measured weight loss by TGA is in proportion to the estimated vapor pressure. [ABSTRACT FROM AUTHOR]