Search

Funder: Deutsche Forschungsgemeinschaft; doi: http://dx.doi.org/10.13039/501100001659, For the growth of low-defect crack-free GaN heterostructures on large-area silicon substrates, compositional grading of AlGaN is a widely adapted buffer technique to restrict the propagation of lattice-mismatch induced defects and balance the thermal expansion mismatch-induced tensile stress. So far, a consolidation of the design strategy of such step-graded buffers has been impaired by the incomplete understanding of the effect of individual buffer design parameters on the mechanical and microstructural properties of the epilayers. Herein, we have analyzed a series of metal-organic chemical vapor deposition grown GaN/graded-AlGaN/AlN/Si heterostructures through in situ curvature measurements and post-growth x-ray diffraction (XRD). Our results reveal that in such epi structures, the GaN layer itself induces more compressive stress than the AlGaN buffer, but the underlying AlGaN layers dictate the magnitude of this stress. Furthermore, for a fixed AlGaN buffer thickness, the mean-stress accumulated during the GaN growth is found to be correlated with its structural properties. Specifically, one µm thick GaN layers that acquire 1.50 GPa or higher compressive mean-stress are seen to possess 20 2 ˉ 1 XRD ω-FWHM values less than 650 arc-sec. Also, the evolution of instantaneous stresses during the growth of the AlGaN layers is found to be a valuable indicator for buffer optimization, and composition difference between successive layers is established as a crucial criterion. The results also show that increasing the total buffer thickness (for a fixed number of steps) or increasing the number of steps (for a fixed total buffer thickness) may not always be beneficial. Irrespective of the buffer thickness, optimized high electron mobility transistor structures show similarly low sheet-resistance (∼350 Ω □)−1 and high mobility (∼2000 cm2 V−1 s −1) at room temperature.

Four major toners are used in the printing industry, cyan, magenta, yellow and black (Key) for making color images on paper. Paper brands suitable for printing have thin mineral/latex coatings, and toners are applied on top of the coating in the printing process. Chemical compositions from toner to toner, as well as from coating to coating, vary according to the needs of the end user. Interactions between the toner and the coating define the final color formation of the images in printing. Hence, it is important to study characteristics and dynamics of toners on coated papers. In this paper, we have used laser-induced plasma spectroscopy (LIBS) to provide information on elemental distributions of the toner and the coating layers on three coated papers and the base paper at a sub-micrometer resolution. Ablation crater depth profiles in the three different material layers were converted into metric scale by combining elemental information from the LIBS measurements and optical profilometry. Ablation efficiencies for a toner of 150 nm/pulse, for a coating of approximately 350 nm/pulse and for a base paper of approximately 1 μm at a fluence of 0.6 J/cm2 of an ArF excimer laser were determined. Using these results, the average layer thicknesses of the toner and the coating layers were evaluated. The detailed analysis of the elemental profiles of the two cyan toners studied revealed strong accumulation of silicon and titanium compounds of the toner on the toner–air interface but also on the toner–coating interface, but to a much smaller extent. The observation reveals the significance of toner component diffusion due to substrate–machine interaction in the printing process. Such diffusion processes must have an important role in final color formation of the images in printing. The method developed provides a unique and accurate means to study toner diffusion processes in coated papers under printing conditions.

Laser-induced graphene (LIG) is a foam-like porous material consisting of few-layer graphene obtained by laser irradiation of a wide range of carbon-containing substrates. Among these, the ability to synthesize LIG from paper and other cellulose-related materials is particularly exciting, as it opens the door to a wide assortment of potential applications in the form of low-cost, flexible, and biodegradable devices. Here, the synthesis of this material, dubbed paper-LIG, on different types of filter papers and xylan biopolymer is discussed. In particular, we report the formation of paper-LIG by single-step irradiation, providing an improvement over the conventional multiple lasing approach and giving an explanation of the conditions that allow this simplified synthesis. All the relevant process parameters are covered, assessing their effect on the resulting electrical properties, structure, and morphology. Additionally, we demonstrate the application of LIG obtained from xylan, an abundant and often underutilized biopolymer, for temperature sensing. These results provide a better understanding of the conditions required for the synthesis of highly conductive LIG from paper and related materials, paving the way for its application, with reduced cost and low environmental impact, in fields ranging from biomonitoring to consumer electronics. published

Funder: Engineering and Physical Sciences Research Council; doi: https://doi.org/10.13039/501100000266, Recently published density functional theory results using the PBE functional (Whaley-Baldwin and Needs 2020 New J. Phys. 22 023020) suggest that elemental sulfur does not adopt the simple-cubic (SC) P m 3 ̄ m phase at high pressures, in disagreement with previous works (Rudin and Liu 1999 Phys. Rev. Lett. 83 3049--52; Gavryushkin et al 2017 Phys. Status Solidi B 254 1600857). We carry out an extensive set of calculations using a variety of different exchange–correlation functionals (both local and non-local), and show that even though under LDA and PW91 a high-pressure SC phase does indeed become favourable at the static lattice level, when zero-point energies (ZPEs) are included, the transition to the SC phase is suppressed in every case, owing to the larger ZPE of the SC phase; thus confirming the transition sequence as R 3 ̄ m → BCC, with no intervening SC phase. We reproduce these findings with pseudopotentials that explicitly include core electronic states, and show that even at these high pressures, only the n = 3 valence shell contributes to bonding in sulfur. We then compare our findings against the all-electron code ELK, which is in excellent agreement with our pseudopotential results, and examine the roles of the exchange and correlation contributions to the total energy. We further calculate anharmonic vibrational corrections to the ZPEs of the two phases, and find that such corrections are several orders of magnitude smaller than the ZPEs and are thus negligible. The effect of finite temperatures is also considered, and we show that the P m 3 ̄ m phase becomes even more unfavourable with an increase in temperature. Finally, the experimental consequences of our results on the equation of state of sulfur and its superconducting critical temperature are explicitly calculated.

Herein, a facile strategy was proposed for preparing a high-strength and super-hydrophobic packaging paper with improved moisture and air barrier properties, which was derived from cellulosic pulps, micro-fibrillated cellulose (MFC), and nano-silica (n-SiO

Based on many years of experience, packaging is considered as an inactive barrier that protects materials and goods from environmental factors. The applicability of native chemical additive such as essential oils in wrapping papers can be used in the forms of films, treatments, coatings or others. Essential oils or extracts from different aromatic plants are used as bioactive substances for antimicrobial activity. In this research, lavender essential oil treatment of packaging papers is examined for its inhibition activity under nine microorganisms—two Gram-positive bacteria, three Gram-negative bacteria, two yeast and two fungal strains. The effectiveness of the treatment on the structural and strength indicators of the obtained paper samples is monitored. In detail, a five-day examination is conducted on the antibacterial effectiveness of lavender essential oil treatment. Results indicate that the lavender treatment of the obtained packaging paper is successful and the antifungal effect is more pronounced. The antimicrobial efficiency of paper treated with lavender essential oil is between 60 and 90% in the first two hours after treatment and gradually decreases to 40%–50% at the end of the 120 h period. The lavender essential oil treatment of wrapping paper has a promising perspective for preserving products from microbial spoilage and extending their shelf life.

To date, flexible pressure sensors built on silver nanowires (AgNWs) have attracted tremendous attention, owing to their versatile applications in wearable, human-interactive, health-monitoring devices. Cellulose and its derivatives, which show great promise in serving flexible pressure sensors as the desired substrate due to their natural abundance, biocompatibility, easy processibility, and low costs. Herein, we reported a rational strategy to design a silver nanowires-dual-cellulose conductive paper. Its morphology, chemical and crystal structures, thermal stability, mechanical performances, and electrical properties were carefully studied. The results suggested that good tensile properties (tensile strength ≤8.10 MPa), high electrical conductivity (≤ 1.74 × 10

Transition-edge sensors (TESs) are capable of highly accurate single particle energy measurement. TESs have been used for a wide range of photon detection applications, particularly in astronomy, but very little consideration has been given to their capabilities as electron calorimeters. Existing electron spectrometers require electron filtering optics to achieve energy discrimination, but this step discards the vast majority of electrons entering the instrument. TESs require no such energy filtering, meaning they could provide orders of magnitude improvement in measurement rate. To investigate the capabilities of TESs in electron spectroscopy, a simulation pipeline has been devised. The pipeline allows the results of a simulated experiment to be compared with the actual spectrum of the incident beam, thereby allowing measurement accuracy and efficiency to be studied. Using Fisher information, the energy resolution of the simulated detectors was also calculated, allowing the intrinsic limitations of the detector to be separated from the specific data analysis method used. The simulation platform has been used to compare the performance of TESs with existing X-ray photoelectron spectroscopy (XPS) analysers. TESs cannot match the energy resolution of XPS analysers for high-precision measurements but have comparable or better resolutions for high count rate applications. The measurement rate of a typical XPS analyser can be matched by an array of 10 TESs with 120 microsecond response times and there is significant scope for improvement, without compromising energy resolution, by increasing array size., Comment: 9 pages, 3 figures

Gaseous acetic acid is formed under conditions of storage of historic paper objects. Its presence not only promotes hydrolytic cleavage of cellulose, but also causes acetylation of the cellulosic material to very small degree. The acetylation reaction proceeds under ambient conditions and without catalyst. Different analytical methods were used to prove the presence of organic acetates on cellulosic paper matrices. DESI-MS in combination with 2H-isotopic labeling showed the presence of sugar fragments with different acetylation patterns. A method based on Zemplen saponification was applied and worked also in the presence of a large excess of acetic acid and/or inorganic acetates. The acetylation effect was quantified for model papers and original, naturally aged paper samples. While cellulose acetylation was clearly proven to be another general pathway of paper aging, further studies of this acetylation phenomenon are needed with regard to conservational aspects and suitable paper storage conditions.

COVID-19 is a highly diffuse respiratory infection caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2). Currently, quantitative real-time polymerase chain reaction (qRT-PCR) technology is commonly used in clinical diagnosis of COVID-19. However, this method is time-consuming and labor-intensive, which is limited in clinical application. Here, we propose a new method for the ultrasensitive and visual detection of SARS-CoV-2 viral nucleic acid. The assay integrates with a paper device and highly efficient isothermal amplification technology - Netlike rolling circle amplification (NRCA), which can reach a limit of detection of 4.12 aM. The paper-based NRCA owns advantages of specificity, portability, visualization and low-cost. Therefore, this method can effectively meet the requirements of point-of-care testing, providing a novel molecular detection technology for clinical diagnosis of COVID-19 and promoting the development of NRCA devices., Graphical Abstract ga1

Cellulose nanofibril (CNF) paper has various applications due to its unique advantages. Herein, we present the intrinsic mechanical properties of CNF papers, along with the preparation and properties of nanoparticle-reinforced CNF composite papers. The literature on CNF papers reveals a strong correlation between the intrafibrillar network structure and the resulting mechanical properties. This correlation is found to hold for all primary factors affecting mechanical properties, indicating that the performance of CNF materials depends directly on and can be tailored by controlling the intrafibrillar network of the system. The parameters that influence the mechanical properties of CNF papers were critically reviewed. Moreover, the effect on the mechanical properties by adding nanofillers to CNF papers to produce multifunctional composite products was discussed. We concluded this article with future perspectives and possible developments in CNFs and their bionanocomposite papers.

Paper-based packaging generally has poor performances in the gas/oil barriers. This work reports a paper-based packaging material prepared via the modification of conventional papers with TEMPO-oxidized cellulose nanofibers (TOCN)/cationic guar gum (CGG) hydrogel film. Specifically, the hydrogel film modification was realized through a layer-by-layer deposition on paper. The hydrogel film modification significantly improved the mechanical and barrier properties of the paper. Specifically, the 4-layer hydrogel film modified paper showed a tensile strength of 34.03 MPa and a burst strength of 510 kPa, respectively. In contrast, the unmodified paper exhibited a tensile strength of 26.78 MPa and a bursting strength of 388 kPa. The packaging performance of this TOCN/CGG hydrogel film modified paper was demonstrated via the fresh mooncake packaging test. Such hydrogel film not only provided the oil resistance, but also maintained the mooncake's freshness. This material can serve as a green and sustainable food packaging.