Search

A normally- OFF AlGaN/GaN high-electron-mobility transistor (HEMT) with p-GaN gate was fabricated on free-standing GaN substrate. The self-terminated etching technology was achieved by combining with AlN stop layer and SF6-based etching gas. Compared with HEMT on Si substrate (Si-HEMT), the HEMT on GaN substrate (GaN-HEMT) demonstrated the higher current density, lower subthreshold swing (SS), lower drain leakage current, and lower static and dynamic ON-resistance that were ascribed to the lower dislocation and less defect on free-standing GaN substrate. Meanwhile, the excellent ${V}_{\mathrm{th}}$ stability up to 175 °C and uniformity was demonstrated. Also, higher breakdown voltage (BV) of 683 V was measured, which was higher than 507 V for Si-HEMT. Hence, a normally- OFF AlGaN/GaN HEMT on free-standing GaN substrate shows good potential in power application. [ABSTRACT FROM AUTHOR]

This study optimized the field plate (FP) design (i.e., the number and positions of FP layers) of p-GaN power high-electron-mobility transistors (HEMTs) on the basic of simulations conducted using the technology computer-aided design software of Silvaco. Devices with zero, two, and three FP layers were designed. The FP layers of the HEMTs dispersed the electric field between the gate and drain regions. The device with two FP layers exhibited a high off-state breakdown voltage of 1549 V because of the long distance between its first FP layer and the channel. The devices were subjected to high-temperature reverse bias and high-temperature gate bias measurements to examine their characteristics, which satisfied the reliability specifications of JEDEC. [ABSTRACT FROM AUTHOR]

In this study, we investigated enhance mode (E-mode) p-GaN/AlGaN/GaN high-electron-mobility transistors (HEMTs) with an Al0.5GaN etch-stop layer. Compared with an AlN etch-stop layer, the Al0.5GaN etch-stop layer not only reduced lattice defects but engendered improved DC performance in the device; this can be attributed to the lattice match between the layer and substrate. The results revealed that the Al0.5GaN etch-stop layer could reduce dislocation by 37.5% and improve device characteristics. Compared with the device with the AlN etch-stop layer, the p-GaN HEMT with the Al0.5GaN etch-stop layer achieved a higher drain current on/off ratio (2.47 × 107), a lower gate leakage current (1.55 × 10−5 A/mm), and a lower on-state resistance (21.65 Ω·mm); moreover, its dynamic RON value was reduced to 1.69 (from 2.26). [ABSTRACT FROM AUTHOR]

In this study, an AlGaN/GaN high-electron-mobility transistor (HEMT) was grown through metal organic chemical vapor deposition on a Qromis Substrate Technology (QST). The GaN on the QST device exhibited a superior heat dissipation performance to the GaN on a Si device because of the higher thermal conductivity of the QST substrate. Thermal imaging analysis indicated that the temperature variation of the GaN on the QST device was 4.5 °C and that of the GaN on the Si device was 9.2 °C at a drain-to-source current (IDS) of 300 mA/mm following 50 s of operation. Compared with the GaN HEMT on the Si device, the GaN on the QST device exhibited a lower IDS degradation at high temperatures (17.5% at 400 K). The QST substrate is suitable for employment in different temperature environments because of its high thermal stability. [ABSTRACT FROM AUTHOR]

A metal–insulator–semiconductor p-type GaN gate high-electron-mobility transistor (MIS-HEMT) with an Al2O3/AlN gate insulator layer deposited through atomic layer deposition was investigated. A favorable interface was observed between the selected insulator, atomic layer deposition–grown AlN, and GaN. A conventional p-type enhancement-mode GaN device without an Al2O3/AlN layer, known as a Schottky gate (SG) p-GaN HEMT, was also fabricated for comparison. Because of the presence of the Al2O3/AlN layer, the gate leakage and threshold voltage of the MIS-HEMT improved more than those of the SG-HEMT did. Additionally, a high turn-on voltage was obtained. The MIS-HEMT was shown to be reliable with a long lifetime. Hence, growing a high-quality Al2O3/AlN layer in an HEMT can help realize a high-performance enhancement-mode transistor with high stability, a large gate swing region, and high reliability. [ABSTRACT FROM AUTHOR]