Search

In present times modern electronic devices often come across thermal difficulties as an outcome of excessive heat production or reduction in surface area for heat exclusion. The current study is aimed to inspect the role of iron (III) oxide in heat transfer enhancement over the rotating disk in an axisymmetric flow. Water is utilized as base fluid conveying nano-particle over the revolving axisymmetric flow mechanism. Additionally, the computational fluid dynamics (CFD) approach is taken into consideration to design and compute the present problem. For our convenience, two-dimensional axisymmetric flow configurations are considered to illustrate the different flow profiles. For radial, axial, and tangential velocity profiles, the magnitude of the velocity, streamlines, and surface graphs are evaluated with the similarity solution in the computational fluid dynamics module. The solution of dimensionless equations and the outcomes of direct simulations in the CFD module show a comparable solution of the velocity profile. It is observed that with an increment in nanoparticle volumetric concentration the radial velocity decline where a tangential motion of flow enhances. Streamlines stretch around the circular surface with the passage of time. The high magnetization force 0 ≤ m 1 ≤ 6 resist the free motion of the nanofluid around the rotating disk. Such research has never been done, to the best of the researchers' knowledge. The outcomes of this numerical analysis could be used for the design, control, and optimization of numerous thermal engineering systems, as described above, due to the intricate physics of nanofluid under the influences of magnetic field and the inclusion of complex geometry. Ferrofluids are metallic nanoparticle colloidal solutions. These kinds of fluids do not exist in nature. Depending on their purpose, ferrofluids are produced using a variety of processes. One of the most essential characteristics of ferrofluids is that they operate in a zero-gravity environment. Ferrofluids have a wide range of uses in engineering and medicine. Ferrofluids have several uses, including heat control loudspeakers and frictionless sealing. In the sphere of medicine, however, ferrofluid is employed in the treatment of cancer via magneto hyperthermia. [ABSTRACT FROM AUTHOR]

The homogeneous and heterogeneous reactions can provide important insights into the design and optimization of nanofluid-based heat transfer systems for various applications, such as in thermal management, energy conversion, and cooling. Understanding such pivotal role of homogeneous and heterogeneous reactions in the nanofluid flow modeling, this study aims to explore the consequences on the nanofluid flow comprising graphene oxide/water mixture through a permeable channel impacted by incorporating uniform homogeneous–heterogeneous reactions and heat generation/absorption respectively. The novelty of the presented model is translated by incorporating the thermal conductivity model that integrates the volume fraction of particle, diameter, and nanolayer impacts. The nanofluids possess multi-directional applications including nano drug delivery, cooling of computer microchips, optical devices, etc. The fluid system is formulated using Tiwari and Das nanofluid flow model. The ordinary differential equations (ODEs) are acquired by adopting apposite transformations and numerically computed utilizing the bvp4c method. Moreover, the impacts of the resulting physical parameters on the distributions of temperature, velocity, and nanoparticle volume fraction are examined using graphical representations. It is comprehended that nanofluid velocity declined for the porosity and magnetic parameters. Nevertheless, an upsurge in the fluid temperature is witnessed for the heat generation/absorption parameter. In addition, the heat transfer rate is more prominent in the case of a strong magnetic field. The validity of the envisioned model is also a highlight of this investigation. [ABSTRACT FROM AUTHOR]

The size of nanoparticles influences the viscosity and thermal conductivity of a nanofluid flow. In this exploration, the impacts of the dynamic viscosity and thermal conductivity of the Corcione model on the magneto-hydrodynamics (MHD) Cu-water nanofluid flow over an exponentially stretched surface are examined. It is pertinent to mention that the whole scenario is done at 300 K and the freezing temperatures of 273.15 K with a particle size of 25 nm. The Navier slip and convective boundary conditions are assumed at the surface. A homogeneous single-phase model is adopted to formulate the problem. Nonlinear, coupled momentum, and energy balance nondimensionalized ordinary differential equations (ODEs) are constructed with suitable transformations. To solve these ODEs numerically, a renowned bvp4c technique of MATLAB software is employed. The effects of the arising parameters are represented graphically and numerically and are depicted in tables and graphs. It is witnessed that the velocity of the copper-water nanofluid declined with larger estimations of the volume fraction of nanoparticles, although the temperature distribution showed the reverse tendency. Moreover, at the surface for higher values of the slip parameter, the velocity profile reduces and the temperature of the fluid augments for higher values of the Biot number. The validation of the model is also executed by comparing it with the published result in the limiting case. An outstanding correlation is attained. [ABSTRACT FROM AUTHOR]

This research aims to examine the combined effects of Cattaneo–Christov heat flux and heat generation/absorption on magnetohydrodynamic (MHD) nanoliquid (Fe3O4-Ethylene glycol) across a linearly stretchable bidirectional surface immersed in a permeable media. The characteristics of nanoliquid (viscosity and thermal conductivity) are a function of temperature and nanoparticle volume fraction. The problem is formulated by considering Corcione's correlation which describes the effective viscosity and thermal conductivity of nanoliquid. The application of Corcione's correlation on a bidirectional surface with a combination of MHD nanofluid comprising the unique combination of (Fe3O4-Ethylene glycol) makes this idea novel and is being presented for the first time. The implementation of appropriate similarity transformation leads to the transition of coupled momentum and energy equations into dimensionless ordinary differential equations (ODEs). These ODEs are numerically addressed by applying a well-known bvp4c method in MATLAB. The outcome of the arising parameters on the velocity and thermal field of nanoliquid are demonstrated graphically and numerically (drag force coefficient and Nusselt number) depicted through tables. It is observed that the porosity and velocity slip parameters combined with the volume fraction of nanoparticles decay velocity field. It is also comprehended that heat transmission augments by escalating the volume fraction of nanoparticles. A strong correlation is reflected in comparing the findings of the current analysis with the preceding literature. [ABSTRACT FROM AUTHOR]

This research analyzes the three-dimensional magneto hydrodynamic nanofluid flow through chemical reaction and thermal radiation above the dual stretching surface in the presence of an inclined magnetic field. Different rotational nanofluid and hybrid nanofluids with constant angular velocity ω ∗ for this comparative study are considered. The constitutive relations are used to gain the equations of motion, energy, and concentration. This flow governing extremely non-linear equations cannot be handled by an analytical solution. So, these equations are transformed into ordinary differential equalities by using the similarity transformation and then handled in MATLAB by applying the boundary values problem practice. The outcomes for the considered problem are accessed through tables and graphs for different parameters. A maximum heat transfer amount is observed in the absence of thermal radiation and when the inclined magnetic field and axis of rotation are parallel. [ABSTRACT FROM AUTHOR]

In this exploration, temperature-dependent Yamada–Ota and Xue hybrid nanoliquid models are investigated over a curved stretchable surface embedded in an absorbent media. Hybrid nanofluids are formed by the combination of single and multi-walled carbon nanotubes (CNTs) as nanoparticles with engine oil as base fluid. The goal of this study is to interpret how the modified Fourier law combined with temperature-dependent thermal conductivity, Newtonian heating and variable heat source/sink enhances thermal performance. A mathematical formulation of the problem is illustrated in the curvilinear coordinates. Highly nonlinear dimensionless ODEs are solved numerically by engaging the bvp4c approach. The impression of the key parameters is illustrated graphically. Drag force coefficient and Nusselt number are highlighted through tables. It is comprehended that the fluid velocity decays on augmenting the velocity slip parameter while elevates on amplifying the curvature parameter. Furthermore, an enhancement in the temperature field is noted for the conjugate parameter. A significant correlation with the existing outcomes is perceived when a comparison with the existing literature is made. [ABSTRACT FROM AUTHOR]

The current paper focused on an unsteady bio-convective Maxwell nanofluid flow subject to convective boundary conditions through an exponentially stretching curved surface. The transportation of heat and mass are observed with thermophoresis and Brownian effect along with chemical reaction. The mathematical flow model is converted into a system of nonlinear system of ODEs via suitable transformation. The numerical solution of a nonlinear system of equations is established with the help of bvp4c MATLAB technique. It is deeply studied that in the curved surface, the pressure is never ignored. The graphical representation of several parameters along the temperature, concentration, microorganism density and velocity distribution is presented. It is examined that the greater estimation of curvature parameter boosts the temperature of fluid and concentration of nanoparticles, although a reverse trend is seen for the velocity profile. Further, it is examined from the numerical values that the heat and mass transfer rate reduce consequently with the enlargement of the curvature parameter. [ABSTRACT FROM AUTHOR]

The nanofluid flows play a vital role in many engineering processes owing to their notable industrial usage and excessive heat transfer abilities. Lately, an advanced form of nanofluids namely "hybrid nanofluids" has swapped the usual nanofluid flows to further augment the heat transfer capabilities. The objective of this envisaged model is to compare the performance of two renowned hybrid nanofluid models namely Hamilton–Crosser and Yamada–Ota. The hybrid nanoliquid (TiO2-SiC/DO) flow model is comprised of Titanium oxide (TiO2) and Silicon carbide (SiC) nanoparticles submerged into Diathermic oil (DO). The subject flow is considered over a stretched surface and is influenced by the magnetic dipole. The uniqueness of the fluid model is augmented by considering the modified Fourier law instead of the traditional Fourier law and slip conditions at the boundary. By applying the suitable similarity transformations, the system of ordinary differential equations obtained from the leading partial differential equations is handled by the MATLAB solver bvp4c package to determine the numerical solution. It is divulged that the Yamada–Ota model performs considerably better than the Hamilton–Crosser flow model as far as heat transfer capabilities are concerned. Further, the velocity reduces on increasing hydrodynamic interaction and slip parameters. It is also noted that both temperature profiles increase for higher hydrodynamic interaction and viscous dissipation parameters. The envisioned model is authenticated when compared with an already published result in a limiting case. [ABSTRACT FROM AUTHOR]

This comparative study inspects the heat transfer characteristics of magnetohydrodynamic (MHD) nanofluid flow. The model employed is a two-phase fluid flow model. Water is utilized as the base fluid, and zinc and titanium oxide ( Zn and TiO 2 ) are used as two different types of nanoparticles. The rotation of nanofluid is considered along the z-axis, with velocity   ω * . A similarity transformation is used to transform the leading structure of partial differential equations to ordinary differential equations. By using a powerful mathematical BVP-4C technique, numerical results are obtained. This study aims to describe the possessions of different constraints on temperature and velocity for rotating nanofluid with a magnetic effect. The outcomes for the rotating nanofluid flow and heat transference properties for both types of nanoparticles are highlighted with the help of graphs and tables. The impact of physical concentrations such as heat transference rates and coefficients of skin friction are examined. It is noted that rotation increases the heat flux and decreases skin friction. In this comparative study, Zn -water nanofluid was demonstrated to be a worthy heat transporter as compared to TiO 2 -water nanofluid. [ABSTRACT FROM AUTHOR]