Search

The use of mineral-based fillers tends to reduce the mechanical properties of paper, which can limit their application. The filler surface modification is a significant treatment to overcome this limitation. This research aims to offer a novel modified mineral-based filler to provide its industrial application. The surface of precipitated calcium carbonate (PCC) was modified with xylan (XS), which is a type of hemicellulose, a polysaccharide consisting mainly of xylose residues. It is used as a filler at different filler dosage levels in paper pulp. Modified PCC(MPCC) was characterized with Fourier transform infrared spectroscopy, Thermogravimetric analysis, X-ray photoelectron spectroscopy, X-ray diffraction and Field-emission scanning electron microscopy analyses. The analysis demonstrated that the MPCC filler surface was coated with XS successfully. The effect of PCC and MPCC-filled hand-sheet paper physical, chemical and optical properties were studied. The experimental results showed that the mechanical (tensile, burst, tear strength) and optical (brightness, opacity) of hand-sheet paper filled with MPCC were significantly improved compared with unmodified PCC-filled paper at the same ash content. The filler retention of PCC and MPCC fillers in paper was investigated, and the MPCC filler showed better filler retention properties in paper stock than the PCC filler. [ABSTRACT FROM AUTHOR]

This research investigated the influence of the layered structure of paper on its selected strength properties. Two types of cellulose pulp were used: unbleached kraft pine pulp (UBSK) and unrefined bleached birch kraft pulp (BHK). Multi-ply papers were obtained from layers of appropriate grammage formed separately and bonded in a wet state. Paper layers were formed from primary pulps (UBSK and BHK) or their mixtures (threeply UBSK-BHK paper and three-ply UBSK-BHK-UBSK paper), from which various variants of laboratory paper samples were made. This work focused on three-layer papers. The obtained laboratory sheets were analysed for changes in tear resistance, tensile strength, bursting strength, short span compression strength (SCT), and corrugating medium test (CMT). In most cases, three-layer structures were characterised by higher strength parameters than single-layer papers. The tear strength and SCT of papers consisting of three layers formed from both mixed pulps were slightly lower than those of solid papers. The results demonstrate the feasibility of producing three-ply paper with significantly reduced variability in parameters such as elongation and bursting strength, which are inherently subject to high variability. [ABSTRACT FROM AUTHOR]

Phosphorylated fibers offer a broad range of applications, particularly in thermal insulation, notably with wood fibers, provided they exhibit improved mechanical characteristics. Despite encountering challenges in applying traditional papermaking methods, the creation of paper or board sheets with phosphorylated pulp fibers remains a challenge. Findings suggest that phosphorylation-modified fibers show increased roughness. Moreover, in comparison with unbeaten kraft sheets (KF) and thermomechanical pulp sheets (TMP), those made from phosphorylated kraft fibers (PKF), using a cationic coagulant and a flocculant, demonstrate significant enhancements in burst index, break index, and tensile energy absorption by 2.12 times, 1.7 times, and 2.77 times, respectively. Similarly, phosphorylated TMP sheets, prepared with a dual polymeric system (coagulant/flocculant), exhibit improvements of 1.42 times, 1.33 times, and 1.82 times, respectively, in these properties. The study emphasizes the ameliorating effect of cationic polymeric agents on the charge impact of phosphorylated fibers on overall sheet quality, while also highlighting the substantial influence of hot-pressing lignin-containing paper on all determined physical properties. [ABSTRACT FROM AUTHOR]

Paper, which is in fact a very complex cellulose-based product derived from different lignocellulosic resources, is usually regarded as a simple omnipresent commodity in our lives. Wood fibers derived from trees are the most employed sources for papermaking purposes. From an environmental protection perspective, and for their essential role in our life (they give us the life itself through their foliar system supporting the photosynthesis process), trees should not be extensively cut down and they should be used less and less for papermaking. Thus, employment of non-woody alternative sources for papermaking could be exploited more as an attractive and feasible option.

Paper, which is in fact a very complex cellulose-based product derived from different lignocellulosic resources, is usually regarded as a simple omnipresent commodity in our lives. Wood fibers derived from trees are the most employed sources for papermaking purposes. From an environmental protection perspective, and for their essential role in our life (they give us the life itself through their foliar system supporting the photosynthesis process), trees should not be extensively cut down and they should be used less and less for papermaking. Thus, employment of non-woody alternative sources for papermaking could be exploited more as an attractive and feasible option. [ABSTRACT FROM AUTHOR]

This article traces the history of the relationship of papermaking and paper to libraries over time. Paper was first made in China and is traditionally considered one of that nation's four greatest inventions, along with gun powder, printing, and the compass. Papermaking was often associated with archives in its early development in China, as well as when it was introduced to Japan, where it came to be a part of some Shinto and Buddhist temples, and later governmental agencies. Under Islam, the availability of paper was linked to increased literacy and growth of libraries. In early modern Europe, before the widespread use of wood in the papermaking process, libraries and archives were part of an "economy of paper" with paper at times being in short supply. In the modern era, the world of papermaking did not intersect much with the world of the library, which made progress with the problem of brittle books, one of its greatest challenges, slow, though recent efforts of government, industry, scientists, and representatives of the library have produced positive results. The damage caused by wood-based paper in libraries was mirrored by the environmental damage caused by wood-based papermaking in communities. The history of papermaking and libraries demonstrates the importance of understanding the technologies which support the library, while also advocating effectively to the representatives of all its sources of support in ways which promote the values of the library and its associated community. [ABSTRACT FROM AUTHOR]

In this article paper, leather from book cover and metal lock from an 18th century church book were studied. The book was printed during the time of Mihai Constantin Șuțu, with the blessing of the Metropolitan of Moldova, Iacov Stamati. The analytical method used to study the components and the methods of obtaining all the important parts was the non-destructive technique SEM-EDX. The results regarding the used paper showed typical intermeshed cellulose fibers. In the case of leather, due to its advanced state of degradation, it was impossible to determine the type of animal from which the skin was used. The elemental analyses (EDX) of the metal lock indicated that it was made of brass. The results of the study of 18th century parts of the book, gave important information about the way of paper manufacture, the conservation state of the cover and the way that the metal lock was made and the safe way to clean it in the restoration and conservation process. [ABSTRACT FROM AUTHOR]

This progress report details the imaging and initial analysis of watermarks and countermarks present in antique, laid paper leaves from a partial, disbound blank book in the study collection of the Conservation Center at the Institute of Fine Arts at NYU. Preliminary review of watermark catalogues indicates that the paper, featuring the coat-of-arms of Le Tellier of three stars over three lizards, and a countermark reading "H. J. Cusson," dates roughly from the late seventeenth to early eighteenth centuries. Of the approximately 115 sheets, 20 were analysed using software developed by William A. Sethares (University of Wisconsin, Madison) and C. Richard Johnson, Jr. (Cornell University) to reliably predict whether individual papers were likely to have been made by the same papermaking mold. The programs allowed for the comparison of watermark and countermark shapes by comparison of the ratios of their internal proportions (WatermarkMarker), and the generation of animated overlay.gifs that fade from one image to the next, for instant visual comparison (WatermarkPointMarker and VisualizeOverlays). The incidence of watermarks and moldmates in the folios were also mapped using the VisCodex online collation visualization tool, developed by the University of Toronto Libraries, in collaboration with Dot Porter and Alberto Campagnolo. The results suggest that the stack of sheets was made from two papermaking molds, making the papers moldmates and twins. The progress report concludes with a hypothesis as to which watermark was connected to which countermark, and suggests that the connections between half-sheets may be more easily recreated after more sheets have been analyzed both visually, and with the software. [ABSTRACT FROM AUTHOR]

This article focuses on the professional writing of women in the transformation phase around 1800. Referring specifically to the woman of letters Helmina von Chézy (1783-1856) and her family, which participated in the literary market over four generations, it asks how authors could use paper(s) as assets or resources. It is shown that writersʼ papers were collected and kept as material evidence of life, that they could be an indicator of financial status and provide insight into financial practices, and that they were used particularly to position oneself (as a writer) and to relate to others. Within changing personal and historical contexts, the writing work of family members was based ultimately, in varying forms and shapes, on the logics of their social relations, lived as well as negotiated and recorded on paper. Thus, the papers used and inscribed in the family can be conceptualized as a multi-perspective kaleidoscope, offering new views on central aspects and mechanisms of writerly economies. [ABSTRACT FROM AUTHOR]

This article analyses the importance of paper in the context of early modern warfare. During the war against the Ottoman Empire at the end of the 17th century, the Habsburgs were establishing a new administration in Hungary, which served both military and civil purposes. Not only did administrative tasks have to be organized, but the very success of military operations depended on the well-ordered work of the administration: communication had to be smooth, and a wide variety of tasks had to be properly and reliably processed. To fulfil these requirements, the administration needed large quantities of paper. This study follows the traces of paper in the records of the Chamber Administration in Buda and points to the vital need for paper at the heart of the new Habsburg rule. The challenges of acquiring and producing paper themselves became crucial aspects of the administration’s work. The article argues that a reliable supply of paper competed even with the distribution of arms and food to become an essential resource in warfare. [ABSTRACT FROM AUTHOR]

Paper was already being used in southwestern Germany before the first paper mills began production there in the late 14th century. But it was the establishment of a local paper industry that made the still relatively new writing material available in large quantities. The demand for paper made the operation of a paper mill seem profitable, and the increased supply of paper in turn fueled the rise in writing. At the end of the Middle Ages, paper thus became the material basis of a media evolution that extended far into modern times. But how was the new writing material produced? The new craft of papermaking differed significantly from the production of parchment, the traditional writing material, in terms of equipment, raw materials, capital requirements, and working methods. Nevertheless, papermaking could use already existing infrastructures, especially in the field of energy supply by waterwheels. This article examines the specific characteristics of the new craft using the example of the German southwest, where numerous paper mills were established in the 15th century. [ABSTRACT FROM AUTHOR]

Copyright of China Pulp & Paper is the property of China Pulp & Paper Magazines Publisher and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Al-Frahids Arts is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Xylan is primarily found in the secondary cell wall of plants providing strength and integrity. To take advantage of the reinforcing effect of xylan in papermaking, it is crucial to understand its role in pulp fibers, as it undergoes substantial changes during pulping. However, the contributions of xylan that is added afterwards (extrinsic) and xylan present after pulping (intrinsic) remain largely unexplored. Here, we partially degraded xylan from refined bleached softwood kraft pulp (BSKP) and adsorbed xylan onto BSKP. Enzymatic degradation of 1 % xylan resulted in an open hand sheet structure, while adsorption of 3 % xylan created a denser fiber network. The mechanical properties improved with adsorbed xylan, but decreased more significantly after enzymatic treatment. We propose that the enhancement in mechanical properties by adsorbed extrinsic xylan is due to increased fiber-fiber bonds and sheet density, while the deterioration in mechanical properties of the enzyme treated pulp is caused by the opposite effect. These findings suggest that xylan is decisive for fiber network strength. However, intrinsic xylan is more critical, and the same properties cannot be achieved by readsorbing xylan onto the fibers. Therefore, pulping parameters should be selected to preserve intrinsic xylan within the fibers to maintain paper strength. [Display omitted] [ABSTRACT FROM AUTHOR]