Search

Flexible interconnection transformation of a distribution network using all-control power electronics technology will help to overcome the technical bottleneck of distributed generation (DG) penetration and high-quality power supply in the traditional distribution network. However, the flexible interconnection form that uses back-to-back power electronic converters to replace tie switches has disadvantages such as high cost and large footprint, so its mass promotion and application are bound to be limited. Therefore, a new topology of flexible interconnected distribution network with embedded DC system (FDN+EDC) with a better economy is proposed. Firstly, the topology of FDN+EDC is introduced to improve the controllability level of the distribution network under high percentage DG penetration, and is compared with the conventional flexible interconnection method. Secondly, in order to realize the coordinated optimal economic operation of source, network and load in the FDN+EDC, a dynamic reconfiguration model of switches status and continuous adjustment of flexible interconnection device (FID) are proposed. Then, to achieve a fast and globally optimal solution of the model, a hierarchical coordinated optimization strategy is designed based on an improved particle swarm algorithm for the optimization of discrete and continuous variables. Finally, the validity of the algorithm is verified, and an 88-node FDN+EDC is constructed to verify the advantages of the proposed embedded DC flexible interconnection topology and realize the joint optimal dispatch of network-source-load. [ABSTRACT FROM AUTHOR]

• Compared with the traditional flexible interconnection method, the EDC-DN power supply architecture proposed in this paper does not simply use MTDC to achieve feeder interconnection but first optimizes and adds dynamic reactive power compensation devices based on voltage source converters in the context of a high percentage of DG access to the grid, and then the dynamic reactive power compensation equipment between different feeders is interconnected on the DC side by adding additional lines, thus weakening the voltage fluctuation of the grid when DG is connected while achieving closed-loop flexible interconnection between multiple feeders. This can achieve closed-loop flexible interconnection between multiple feeders while weakening the voltage fluctuation of the grid when DG is connected, provide a flexible active power adjustment path for high proportional DG access to DN, and realize power mutual aid between different feeders and network-level bearing of DG. • For the issue of power supply recovery after EDC-DN fault, a comprehensive analysis was conducted on the impact of different fault locations on the power supply recovery process. The collaborative plan between EDC and DAS was first proposed, clarifying the information interaction content between the distribution network automation central station, feeder sub-station, and EDC sub-station during the power supply recovery process. An EDC-DN two-stage power supply restoration architecture considering EDC continuous regulation, combinatorial optimization of interconnection switch and sectionalizing switch is proposed and designed, which fills the technical gap in the integration of EDC and DAS systems. • This paper demonstrates the real-time dynamics of EDC in the EDC-DN power supply restoration process through simulation. The restoration process includes a fast restoration phase based on EDC continuous regulation of power supply, a non-fault section transfer process based on mechanical switch action, and an economically optimal operation phase using an optimal combination of switches to reconfigure the distribution network topology. The current power supply restoration strategy of SOP focuses on the final restoration state of EDC continuous regulation and switch combination rather than on the whole process of power supply restoration. This paper considers the real-time dynamics of the entire EDC-DN power supply restoration process. It fills the technical gap in the current SOP power supply restoration without considering the intermediate process. The flexible interconnection device (FID) enables multiple distribution feeders in closed-loop mode to support a higher proportion of distributed generation (DG) and large-scale new loads connected to the distribution network (DN). Moreover, the closed-loop operation mode based on FIDs provides an effective technology roadmap for high-quality and highly reliable power users, especially the quick restoration of power supply after the failure of DN. This paper proposes a new supply shape in which the multi-terminal DC links are flexibly embedded in the AC DN (EDC-DN) to realize closed-loop operation, achieving lower investment costs than the existing mode that replaces tie switches with soft open points (SOPs). Meanwhile, a two-stage power supply quick recovery control technology is proposed for the EDC-DN, including the fast power supply recovery stage based on EDC and the optimizing restoration stage based on network reconfiguration. Firstly, the role of EDC in the process of power supply restoration of three different faults on AC feeder is analyzed. Secondly, a detailed power supply recovery process is proposed, which is based on a distribution automation system (DAS) and the real-time control capability of EDC. Thirdly, the power supply restoration second stage is implemented, which is based on network reconfiguration with switch combination and EDC continuous variable optimization. Finally, a 58-node DN with an EDC system was constructed using PSCAD/MTDC simulation software to verify the effectiveness of the two-stage strategy for EDC-DN power restoration. © 2017 Elsevier Inc. All rights reserved. [ABSTRACT FROM AUTHOR]

• Introduce the chance constrained programming to deal with the randomness of wind power, photovoltaic output and load. • The fault recovery capability of flexible interconnected distribution network considering closed-loop operation is more fully developed. • Analyze the fault recovery effect of flexible interconnected distribution network under different SOP control modes and propose a two-stage recovery strategy. • Considering more complex faults of flexible interconnected distribution network, provide an effective fault recovery strategy for concurrent faults. With the continuous exploration of the application value of flexible interconnected distribution network, Soft Open Point (SOP) as its core device, how to fully explore the self-healing control support capability of SOP and improve its power supply reliability becomes particularly important. Aiming at the problem of fault recovery of flexible interconnected distribution network with multiple AC power supply areas, firstly, the topology of flexible interconnection of distribution network and the fault recovery model of SOP are described. Secondly, the stochastic nature of wind power, photovoltaic output and load is considered, and then the chance-constrained programming is introduced to deal with. Then, aiming at the coordinated operation of flexible closed-loop network in multiple AC power supply areas, and introducing the constraint on the acting number of switches, a stochastic optimization model of flexible interconnected distribution network fault recovery is established, and then the model is transformed into a deterministic mixed integer second-order cone programming model, which can be solved by CPLEX solver. Finally, the proposed model has been tested on a modified hand-in-hand IEEE33 system with dual-terminal SOP, verifying that the strategy proposed in this paper can effectively solve the fault recovery problem of flexible interconnected distribution network with multiple AC power supply areas considering uncertainty, and showing that this strategy can maximize the self-healing capability of distribution system. [ABSTRACT FROM AUTHOR]