Search

This article proposes a fixed switching frequency (FSF)-based improved model predictive control (MPC) for a five-level active neutral-point clamped (5L-ANPC) converter. Compared to the conventional MPC for 5L-ANPC converter, the proposed MPC significantly reduces the computational burden while ensuring the balance of dc-link and flying capacitor voltages. The proposed MPC optimally selects the control voltage vectors to reduce common mode voltage (CMV), leading to a small CMV of the converter. Using three voltage vectors action per control cycle in MPC, FSF is achieved. Steady-state and dynamic performances of the proposed MPC have been evaluated by experiments. The results verify the feasibility and effectiveness of the proposed MPC method. [ABSTRACT FROM AUTHOR]

In this article, an efficient model predictive control (MPC) using virtual voltage vectors for three-phase three-level converters is proposed. The proposed MPC achieves constant switching frequency by applying four voltage vectors, including one virtual voltage vectors and three other voltage vectors, in each control cycle. In addition, to reduce the computational burden, two-stage MPC approach is adopted. The first stage chooses one of six medium voltage vectors that minimizes the cost function. Then, in the second stage, these voltage vectors including virtual voltage vectors, which locate the same sector with the optimal medium voltage vector, are involved in the MPC optimization. The advantages of the proposed MPC over the classical MPC have been validated through experimental results. [ABSTRACT FROM AUTHOR]

In this article, a low complexity finite-control-set model predictive control (FCS-MPC) based on the discrete space vector modulation (DSVM) is proposed for T-type three-phase three-level (3P-3L) converters. Different from the conventional FCS-MPC, 48 virtual voltage vectors (VVs) of the converter are constructed by real VVs based on the DSVM. Thus, the performance of 3P-3L converters is significantly improved and the peak amplitude of high-order harmonics concentrates at the sampling frequency. Furthermore, two-stage FCS-MPC based on virtual VVs is proposed to reduce the computation burden. Its first stage selects one of six virtual VVs that minimizes the current tracking error. Then, these candidate VVs located in the same sector as the optimal virtual VV selected in the first stage are evaluated in the second-stage optimization. Thus, the computational efficiency has been greatly improved. To verify the validity of the proposed control method and show its superiority over the conventional FCS-MPC, experimental results are presented. [ABSTRACT FROM AUTHOR]

Compared with the conventional multilevel converters, the hybrid-clamped converter (HCC) reduces the number of power devices, which brings down the converter cost while enhancing its reliability for medium-voltage high-power applications. As one of typical medium-voltage HCCs, the single-phase, six-level HCC (6L-HCC) faces the main technical challenge of the voltage balance among five inner capacitors. Most of the existing pulsewidth modulation techniques cannot solve this problem. Advanced control methods that directly apply a selected voltage vector, such as the classical model predictive control (MPC), may fail to balance the inner capacitor voltages during low output frequencies. In view of this situation, this article proposes an improved MPC approach with autotuning weighting factors. It contributes to ensure excellent performance of 6L-HCC under all operating conditions with well-balanced inner capacitor voltages. Simulation and experimental results are proposed to verify the effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]