Search

Combination chemotherapy is considered an effective strategy to inhibit tumor growth. Here, beta-sheet-rich silk nanofibers are co-loaded with hydrophilic doxorubicin (DOX) and hydrophobic paclitaxel (PTX) through a sequential physical blending-centrifugation-blending process. The ratio and amount of DOX and PTX on the nanofibers are regulated independently to optimize cooperative interaction. Both PTX and DOX are immobilized on the same nanofibers to avoid burst release problems. Besides the water-insoluble PTX, more than half of the DOX remained fixed on the nanofibers for more than 28 days, which facilitated the co-internalization of both DOX and PTX by tumor cells in vitro. Changing the ratio of co-loaded DOX and PTX achieved optimal combination therapy in vitro. The DOX-PTX co-loaded nanofibers are assembled into injectable hydrogels to facilitate in situ injection around tumor tissues in vivo. Long-term inhibition is achieved for tumors treated with DOX-PTX co-loaded hydrogels, superior to those treated with free DOX and PTX, and hydrogels loaded with only DOX or PTX. Considering the mild and controllable physical loading process and superior loading capacity for both hydrophilic and hydrophobic ingredients, these injectable silk nanofiber hydrogels are promising carriers to deliver multiple drug types simultaneously in situ, enhancing combination chemotherapies towards clinical applications., (© 2024 Wiley‐VCH GmbH.)

Conventional thinking when designing biodegradable materials and devices is to tune the intrinsic properties and morphological features of the material to regulate their degradation rate, modulating traditional factors such as molecular weight and crystallinity. Since regenerated silk protein can be directly thermoplastically molded to generate robust dense silk plastic-like materials, this approach afforded a new tool to control silk degradation by enabling the mixing of a silk-degrading protease into bulk silk material prior to thermoplastic processing. Here we demonstrate the preparation of these silk-based devices with embedded silk-degrading protease to modulate the degradation based on the internal presence of the enzyme to support silk degradation, as opposed to the traditional surface degradation for silk materials. The degradability of these silk devices with and without embedded protease XIV was assessed both in vitro and in vivo. Ultimately, this new process approach provides direct control of the degradation lifetime of the devices, empowered through internal digestion via water-activated proteases entrained and stabilized during the thermoplastic process.

Injectable hydrogels with osteogenic and angiogenetic properties are of interest in bone tissue engineering. Since the bioactivity of ions is concentration-dependent, nanosized silk-magnesium (Mg) complexes were previously developed and assembled into hydrogels with angiogenic capabilities but failed to control both osteogenic and angiogenetic activities effectively. Here, nanosized silk particles with different sizes were obtained by using ultrasonic treatment to control silk-Mg coordination and particle formation, resulting in silk-Mg hydrogels with different types of bioactivity. Fourier transform infrared and X-ray diffraction results revealed that different coordination intensities were present in the different complexes as a basis for the differences in activities. Slow Mg ion release was controlled by these nanosized silk-Mg complexes through degradation. With the same amount of Mg ions, the different silk-Mg complexes exhibited different angiogenic and osteogenic capacities. Complexes with both angiogenic and osteogenic capacities were developed by optimizing the sizes of the silk particles, resulting in faster and improved quality of bone formed in vivo than complexes with the same composition of silk and Mg but only angiogenic or osteogenic capacities. The biological selectivity of silk-Mg complexes should facilitate applications in tissue regeneration.

Through evolution, nature has presented a set of remarkable protein materials, including elastins, silks, keratins and collagens with superior mechanical performances that play crucial roles in mechanobiology. However, going beyond natural designs to discover proteins that meet specified mechanical properties remains challenging. Here, we report a generative model that predicts protein designs to meet complex nonlinear mechanical property-design objectives. Our model leverages deep knowledge on protein sequences from a pretrained protein language model and maps mechanical unfolding responses to create proteins. Via full-atom molecular simulations for direct validation, we demonstrate that the designed proteins are de novo, and fulfill the targeted mechanical properties, including unfolding energy and mechanical strength, as well as the detailed unfolding force-separation curves. Our model offers rapid pathways to explore the enormous mechanobiological protein sequence space unconstrained by biological synthesis, using mechanical features as the target to enable the discovery of protein materials with superior mechanical properties.

Metal ions provide multifunctional signals for cell and tissue functions, including regeneration. Inspired by metal-organic frameworks (MOFs), nanosized silk protein aggregates with a high negative charge density are used to form stable silk-magnesium ion complexes. Magnesium ions (Mg ions) are added directly to silk nanoparticle solutions, inducing gelation through the formation of silk-Mg coordination complexes. The Mg ions are released slowly from the nanoparticles through diffusion, with sustained release via tuning the degradation or dissolution of the nanosized silk aggregates. Studies in vitro reveal a dose-dependent influence of Mg ions on angiogenic and anti-inflammatory functions. Silk-Mg ion complexes in the form of hydrogels also stimulate tissue regeneration with a reduced formation of scar tissue in vivo, suggesting potential utility in tissue regeneration., (© 2023 Wiley-VCH GmbH.)

Biochemical and mechanical interactions between cells and the surrounding extracellular matrix influence cell behavior and fate. Mimicking these features in vitro has prompted the design and development of biomaterials, with continuing efforts to improve tailorable systems that also incorporate dynamic chemical functionalities. The majority of these chemistries have been incorporated into synthetic biomaterials, here we focus on modifications of silk protein with dynamic features achieved via enzymatic, "click", and photo-chemistries. The one-pot synthesis of vinyl sulfone modified silk (SilkVS) can be tuned to manipulate the degree of functionalization. The resultant modified protein-based material undergoes three different gelation mechanisms, enzymatic, "click", and light-induced, to generate hydrogels for in vitro cell culture. Further, the versatility of this chemical functionality is exploited to mimic cell-ECM interactions via the incorporation of bioactive peptides and proteins or by altering the mechanical properties of the material to guide cell behavior. SilkVS is well-suited for use in in vitro culture, providing a natural protein with both tunable biochemistry and mechanics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Biocompatible and morphable hydrogels capable of multimode reprogrammable, and adaptive shape changes are potentially useful for diverse biomedical applications. However, existing morphable systems often rely on complicated structural designs involving cumbersome and energy-intensive fabrication processes. Here, we report a simple electric-field-activated protein network migration strategy to reversibly program silk-protein hydrogels with controllable and reprogrammable complex shape transformations. The application of a low electric field enables the convergence of net negatively charged protein cross-linking networks toward the anode (isoelectric point plane) due to the pH gradient generated in the process, facilitating the formation of a gradient network structure and systems suitable for three-dimensional shape change. These tunable protein networks can be reprogrammed or permanently fixed by control of the polymorphic transitions. We show that these morphing hydrogels are capable of conformally interfacing with biological tissues by programming the shape changes and a bimorph structure consisting of aligned carbon nanotube multilayers and the silk hydrogels was assembled to illustrate utility as an implantable bioelectronic device for localized low-voltage electrical stimulation of the sciatic nerve in a rabbit.

Fragrances, which are commonly used in food, textiles, consumer products, and medical supplies, are volatile compounds that require stabilization and controlled release due to their sensitivity to environmental conditions such as light, oxygen, temperature, and humidity. Encapsulation in various material matrices is a desired technique for these purposes, and there is a growing interest in using sustainable natural materials to reduce environmental impact. In this study, fragrance encapsulation in microspheres made from silk fibroin (SF) was investigated. Fragrance-loaded silk fibroin microspheres (Fr-SFMSs) were prepared by adding fragrance/surfactant emulsions to silk solutions, followed by mixing them with polyethylene glycol under ambient conditions. The study investigated eight different fragrances, where citral, beta-ionone, and eugenol showed higher binding affinities to silk than the other five fragrances, resulting in better microsphere formation with uniform sizes and higher fragrance loading (10-30%). Citral-SFMSs showed characteristic crystalline β-sheet structures of SF, high thermal stability (initial weight loss at 255 °C), long shelf life at 37 °C (>60 days), and sustained release (∼30% of citral remained after incubation at 60 °C for 24 h). When citral-SFMSs with different sizes were used to treat cotton fabrics, about 80% of the fragrance remained on the fabrics after one wash, and the duration of release from the treated fabrics was significantly longer than that of control samples treated with citral alone (no microspheres). This method of preparing Fr-SFMSs has potential applications in textile finishing, cosmetics, and the food industry.

Silk fibroin has applications in different medical fields such as tissue engineering, regenerative medicine, drug delivery and medical devices. Advances in silk chemistry and biomaterial designs have yielded exciting tools for generating new silk-based materials and technologies. Selective chemistries can enhance or tune the features of silk, such as mechanics, biodegradability, processability and biological interactions, to address challenges in medically relevant materials (hydrogels, films, sponges and fibres). This Review details the design and utility of silk biomaterials for different applications, with particular focus on chemistry. This Review consists of three segments: silk protein fundamentals, silk chemistries and functionalization mechanisms. This is followed by a description of different crosslinking chemistries facilitating network formation, including the formation of composite biomaterials. Utility in the fields of tissue engineering, drug delivery, 3D printing, cell coatings, microfluidics and biosensors are highlighted. Looking to the future, we discuss silk biomaterial design strategies to continue to improve medical outcomes., (© 2023. Springer Nature Limited.)

Protein-based hydrogel biomaterials provide a platform for different biological applications, including the encapsulation and stabilization of different biomolecules. These hydrogel properties can be modulated by controlling the design parameters to match specific needs; thus, multicomponent hydrogels have distinct advantages over single-component hydrogels due to their enhanced versatility. Here, silk fibroin and γ-prefoldin chaperone protein based composite hydrogels were prepared and studied. Different ratios of the proteins were chosen, and the hydrogels were prepared by enzyme-assisted cross-linking. The secondary structure of the two proteins, dityrosine bond formation, and mechanical properties were assessed. The results obtained can be used as a platform for the rational design of composite thermostable hydrogel biomaterials to facilitate protection (due to hydrogel mechanics) and retention of bioactivity (e.g., of enzymes and other biomolecules) due to chaperone-like properties of γ-prefoldin.

Silk fibroin protein is a biomaterial with excellent biocompatibility and low immunogenicity. These properties have catapulted the material as a leader for extensive use in stents, catheters, and wound dressings. Modulation of hydrophobicity of silk fibroin protein to further expand the scope and utility however has been elusive. We report that installing perfluorocarbon chains on the surface of silk fibroin transforms this water-soluble protein into a remarkably hydrophobic polymer that can be solvent-cast. A clear relationship emerged between fluorine content of the modified silk and film hydrophobicity. Water contact angles of the most decorated silk fibroin protein exceeded that of Teflon®. We further show that water uptake in prefabricated silk bars is dramatically reduced, extending their lifetimes, and maintaining mechanical integrity. These results highlight the power of chemistry under moderate conditions to install unnatural groups onto the silk fibroin surface and will enable further exploration into applications of this versatile biomaterial., (© 2022 Wiley-VCH GmbH.)

Biomineralization is a common strategy used in Nature to improve the mechanical strength and toughness of biological materials. This strategy, applied in materials like bone or nacre, serves as inspiration for materials scientists and engineers to design new materials for applications in healthcare, soft robotics or the environment. In this regard, composites consisting of silk and hydroxyapatite have been extensively researched for bone regeneration applications, due to their reported cytocompatibility and osteoinduction capacity that supports bone formation in vivo . Thus, it becomes relevant to understand how silk and hydroxyapatite interact at their interface, and how this affects the overall mechanical properties of these composites. This theoretical-experimental work investigates the interfacial dynamic and structural properties of silk in contact with hydroxyapatite, combining molecular dynamics simulations with analytical characterization. Our data indicate that hydroxyapatite decreases the β-sheets in silk, which are a key load-bearing element of silk. The β-sheets content can usually be increased in silk biomaterials via post-processing methods, such as water vapor annealing. However, the presence of hydroxyapatite appears to reduce also for the formation of β-sheets via water vapor annealing. This work sheds light into the interfacial properties of silk-hydroxyapatite composite and their relevance for the design of composite biomaterials for bone regeneration.

Genetically engineered silk-elastin-like-proteins (SELPs) synthesized with the combination of silk and elastin domains are bioengineered to also contain a graphene oxide (GO) binding domain. The conductivity and mechanical stability of graphene, combined with SELP-specific graphene interfaces are pursued as dynamic hybrid materials, toward biomaterial-based electronic switches. The resulting bioengineered proteins with added GO demonstrate cytocompatibility and conductivity that could be modulated by changing hydrogel size in response to temperature due to the SELP chemistry. Upon increased temperature, the gels coalesce and contract, providing sufficient condensed spacing to facilitate conductivity via the graphene domains, a feature that is lost at lower temperatures with the more expanded hydrogels. This thermally induced contraction-expansion is reversible and cyclable, providing an "on-off" conductive switch driven by temperature-driven hydrogel shape-change., (© 2022 Wiley-VCH GmbH.)

Peptide- and protein-based therapeutics have drawn significant attention over the past few decades for the treatment of infectious diseases, genetic disorders, oncology, and many other clinical needs. Yet, protecting peptide- and protein-based drugs from degradation and denaturation during processing, storage and delivery remain significant challenges. In this review, we introduce the properties of peptide- and protein-based drugs and the challenges associated with their stability and delivery. Then, we discuss delivery strategies using synthetic polymers and their advantages and limitations. This is followed by a focus on silk protein-based materials for peptide/protein drug processing, storage, and delivery, as a path to overcome stability and delivery challenges with current systems., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Elastin-like polymers (ELPs) and their chimeric subfamily the silk elastin-like polymers (SELPs) exhibit a lower critical solvation temperature (LCST) behavior in water which has been extensively studied from theoretical, computational and experimental perspectives. The inclusion of silk domains in the backbone of the ELPs effects the molecular dynamics of the elastin-like domains in response to increased temperature above its transition temperature and confers gelation ability. This response has been studied in terms of initial and long-term changes in structures, however, intermediate transition states have been less investigated. Moreover, little is known about the effects of reversible hydration on the elastin versus silk domains in the physical crosslinks. We used spectroscopic techniques to analyze initial, intermediate and long-term states of the crosslinks in SELPs. A combination of thermoanalytical and rheological measurements demonstrated that the fast reversible rehydration of the elastin motifs adjacent to the relatively small silk domains was capable of breaking the silk physical crosslinks. This feature can be exploited to tailor the dynamics of these types of crosslinks in SELPs. STATEMENT OF SIGNIFICANCE: The combination of silk and elastin in a single molecule results in synergy via their interactions to impact the protein polymer properties. The ability of the silk domains to crosslink affects the thermoresponsive properties of the elastin domains. These interactions have been studied at early and late states of the physical crosslinking, while the intermediate states were the focus of the present study to understand the reversible phase-transitions of the elastin domains over the silk physical crosslinking. The thermoresponsive properties of the elastin domains at the initial, intermediate and late states of silk crosslinking were characterized to demonstrate that reversible hydration of the elastin domains influenced the reversibility of the silk crosslinks., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier Ltd.)

The modulation of reaction kinetics with horseradish peroxidase (HRP)-catalyzed cross-linking of proteins remains a useful strategy to modulate hydrogel formation. Here, we demonstrate that the presence of positively charged lysines in silk-elastin-like polymers impacts the thermal transition temperature of these proteins, while the location in the primary sequence modulates the reactivity of the tyrosines. The positively charged lysine side chains decreased π-π interactions among the tyrosines and reduced the rate of formation and number of HRP-mediated dityrosine bonds, dependent on the proximity of the charged group to the tyrosine. The results suggest that the location of repulsive charges can be used to tailor the reaction kinetics for enzymatic cross-linking, providing further control of gelation rates for in situ gel formation and the resulting protein-based gel characteristics.

Silk sutures with antibacterial and anti-inflammatory functions were developed for sustained dual-drug delivery to prevent surgical site infections (SSIs). The silk sutures were prepared with core-shell structures braided from degummed silk filaments and then coated with a silk fibroin (SF) layer loaded with berberine (BB) and artemisinin (ART). Both the rapid release of drugs to prevent initial biofilm formation and the following sustained release to maintain effective concentrations for more than 42 days were demonstrated. In vitro assays using human fibroblasts (Hs 865.Sk) demonstrated cell proliferation on the materials, and hemolysis was 2.4 ± 0.8%, lower than that required by ISO 10993-4 standard. The sutures inhibited platelet adhesion and promoted collagen deposition and blood vessel formation. In vivo assessments using Sprague-Dawley (SD) rats indicated that the coating reduced the expression of pro-inflammatory cytokines interleukin-10 (IL-10) and tumor necrosis factor-α (TNF-α), shortening the inflammatory period and promoting angiogenesis. The results demonstrated that these new sutures exhibited stable structures, favorable biocompatibility, and sustainable antibacterial and anti-inflammatory functions with potential for surgical applications.

Scarless spinal cord regeneration remains a challenge due to the complicated microenvironment at lesion sites. In this study, the nerve growth factor (NGF) was immobilized in silk protein nanofiber hydrogels with hierarchical anisotropic microstructures to fabricate bioactive systems that provide multiple physical and biological cues to address spinal cord injury (SCI). The NGF maintained bioactivity inside the hydrogels and regulated the neuronal/astroglial differentiation of neural stem cells. The aligned microstructures facilitated the migration and orientation of cells, which further stimulated angiogenesis and neuron extensions both in vitro and in vivo . In a severe rat long-span hemisection SCI model, these hydrogel matrices reduced scar formation and achieved the scarless repair of the spinal cord and effective recovery of motor functions. Histological analysis confirmed the directional regenerated neuronal tissues, with a similar morphology to that of the normal spinal cord. The in vitro and in vivo results showed promising utility for these NGF-laden silk hydrogels for spinal cord regeneration while also demonstrating the feasibility of cell-free bioactive matrices with multiple cues to regulate endogenous cell responses.

Silk nanofibers are versatile carriers for hydrophobic and hydrophilic drugs, but fall short in terms of effective delivery to cells, which is essential for therapeutic benefits. Here, the size of silk nanofibers was tuned by ultrasonic treatment to improve the cell penetration features without impacting the structural features. The gradual decrease in silk nanofiber length from 1700 to 40 nm resulted in improved cell uptake. The internalized silk nanofiber carriers evaded lysosomes, which facilitated retention in cancer cells in vitro. The smaller sizes also facilitated enhanced penetration of tumor spheroids for improved delivery in vitro. The cytotoxicity of paclitaxel (PTX)-laden nanocarriers increased when the length of the silk nanocarriers decreased. Both the drug loading capacity and delivery of silk nanocarriers with optimized sizes suggest potential utility in cell treatments.

Peripheral nerve repair is a common but challenging surgical treatment. Many artificial nerve grafts have been developed, including nerve guidance conduits (NGCs) with biocompatibility, suitable mechanical properties and topography to guide axon growth. However, there remains a need to promote nerve regeneration and accelerate functional recovery using NGCs for nerve reconstruction. Here, silk fibroin (SF) and magnesium (S/Mg) filaments were braided into an inner layer of NGC and freeze-dried with a solution of SF and chitosan (CS). The mechanical stress of these S/Mg-SF/CS conduits reached 2.8 ± 0.2 N and possessed high compression strength. The conduits were evaluated with subcutaneous implantation. Sustainable mechanical function was demonstrated when used to repair 10 mm sciatic nerve gaps in rats. The hollow NGCs improved neurochemotaxis from the damaged nerves. The wet weight ratio of the gastrocnemius muscle, a target muscle for the sciatic nerve related to motor and sensory functions in the NGC group, reached 83.5% of that in the autologous group in 8 weeks; the nerve ports at both ends of the NGC grew well. When the distal end of the regenerated nerve was observed by Transmission Electron Microscopy (TEM), there was no significance difference in the diameter and thickness of the myelin sheath of the distal nerve between the autograft and S/Mg-SF/CS group, indicating that S/Mg-SF/CS NGC in this study promoted the growth of damaged nerves and provided appropriate physio mechanical guidance, thus suggesting potential utility for this approach in artificial nerve transplantation. STATEMENT OF SIGNIFICANCE: 1. Porous nerve guidance conduits (NGCs) is reinforced by a braided composite structure consisting of silk/magnesium filaments, which provides the NGC with appropriate physio-mechanical guidance as well as sufficient stability to support the biological micro-environment during early-stages of nerve regeneration and functional recovery. 2. Sufficient mechanical properties, biocompatibility with Schwan cells and good performance after sciatic nerve transplantation demonstrates that the S/Mg-SF/CS NGC in this study promotes the growth of damaged nerves and provides a suitable physio-mechanical guide for potential in artificial nerve transplantation. 3. A facile scalable manufacturing process is achieved by utilizing multidisciplinary engineering, such as textile technologies, biomaterial engineering and medical science., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Stem cells have potential utility in wound therapy, however the benefits are often limited due to cell injury from shear stress during injection and poor retention at the wound site. Here, shear-thinning silk nanofiber hydrogels were used to load bone marrow derived mesenchymal stem cells (BMSCs) and inject into wound sites to optimize cell retention and accelerate wound healing. The BMSCs in the silk nanofiber hydrogels maintained stemness better than the cells cultured on plates, and the expression of wound healing-related genes was significantly higher in the hydrogels with higher silk concentrations (2 wt%). The silk nanofibers physically prevented migration of BMSCs from the deposition site in the wound bed. In addition to faster wound healing, these BMSC-loaded hydrogels mediated angiogenesis and inflammation and improved collagen deposition and hair follicle regeneration in vivo in rats. Considering that these silk nanofiber hydrogels were successfully used here as carriers for stem cells to accelerate wound healing, further study for skin regeneration may be warranted.

Highly hydrated silk materials (HHSMs) have been the focus of extensive research due to their usefulness in tissue engineering, regenerative medicine, and soft devices, among other fields. However, HHSMs have weak mechanical properties that limit their practical applications. Inspired by the mechanical training-driven structural remodeling strategy (MTDSRS) in biological tissues, herein, engineered MTDSRS is developed for self-reinforcement of HHSMs to improve their inherent mechanical properties and broaden potential utility. The MTDSRS consists of repetitive mechanical training and solvent-induced conformation transitions. Solvent-induced conformation transition enables the formation of β-sheet physical crosslinks among the proteins, while the repetitive mechanical loading allows the rearrangement of physically crosslinked proteins along the loading direction. Such synergistic effects produce strong and stiff mechanically trained-HHSMs (MT-HHSMs). The fracture strength and Young's modulus of the resultant MT-HHSMs (water content of 43 ± 4%) reach 4.7 ± 0.9 and 21.3 ± 2.1 MPa, respectively, which are 8-fold stronger and 13-fold stiffer than those of the as-prepared HHSMs, as well as superior to most previously reported HHSMs with comparable water content. In addition, the animal silk-like highly oriented molecular crosslinking network structure also provides MT-HHSMs with fascinating physical and functional features, such as stress-birefringence responsibility, humidity-induced actuation, and repeatable self-folding deformation., (© 2021 Wiley-VCH GmbH.)

Scarless skin regeneration remains a challenge due to the complicated microenvironment involved in wound healing. Here, the hydrophobic drug, asiaticoside (AC), was loaded inside silk nanofiber hydrogels to achieve bioactive and injectable matrices for skin regeneration. AC was dispersed in aqueous silk nanofiber hydrogels with retention of biological functions that regulated inflammatory reactions and vascularization in vitro. After implantation in full-thickness wound defects, these AC-laden hydrogel matrices achieved scarless wound repair. Inflammatory reactions and angiogenesis were regulated during inflammation and remodeling, which was responsible for wound regeneration similar to normal skin. Both in vitro and in vivo studies demonstrated promising applications of these AC-laden silk hydrogels towards scarless tissue regeneration.

In situ 3D printing is an emerging technique designed for patient-specific needs and performed directly in the patient's tissues in the operating room. While this technology has progressed rapidly, several improvements are needed to push it forward for widespread utility, including ink formulations and optimization for in situ context. Silk fibroin inks emerge as a viable option due to the diverse range of formulations, aqueous processability, robust and tunable mechanical properties, and self-assembly via biophysical adsorption to avoid exogenous chemical or photochemical sensitizer additives, among other features. In this review, we focus on this new frontier of 3D in situ printing for tissue regeneration, where silk is proposed as candidate biomaterial ink due to the unique and useful properties of this protein polymer., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Silk biomaterials are important for applications in biomedical fields due to their outstanding mechanical properties, biocompatibility, and tunable biodegradation. Chemical functionalization of silk by various chemistries can be leveraged to enhance and tune these features and enable the expansion of silk-based biomaterials into additional fields. Sugars are particularly relevant for intracellular communication, signal transduction events, as well as in hydrated extracellular matrices such as in cartilage, vitreous, and brain tissues. Multiple reaction pathways are demonstrated (carboxylation of serines followed by carbodiimide coupling with glucosamine, carboxylation of tyrosines followed by carbodiimide coupling with glucosamine; direct carbodiimide coupling of the inherent carboxylic acids of silk (aspartic and glutamic acid) with glucosamine) for the covalent conjugation of glucosamine onto silk with characterization by proton nuclear magnetic resonance ( 1 H-NMR), liquid chromatography tandem mass spectroscopy (LC-MS), water contact angle (WCA), and Fourier transform infrared (FTIR) spectroscopy. The results indicate that different pathways substitute different amounts of glucosamine onto silk chains, with control over resulting material properties, including hydrophobicity/hydrophilicity and biological responses. The aqueous processability of these conjugates into functional material formats (films, sponges) is assessed. These new classes of bio-inspired materials can lead to multifunctional biomaterials for potential applications in different fields of biomedical engineering., (© 2021 Wiley-VCH GmbH.)

Silk fibroin interactions with metallic surfaces can provide utility for medical materials and devices. Toward this goal, titanium alloy (Ti6Al4 V) was covalently grafted with polyacrylamide via electrochemically reducing 4‐nitrobenzene diazonium salt in the presence of acrylamide. Analysis of the modified surfaces with FT‐IR spectra, SEM and AFM were consistent with surface grafting. Functionalised titanium samples with a silk fibroin membrane, with and without impregnated therapeutics, were used to assess cytocompatibility and drug delivery. Initial cytocompatibility experiments using fibroblasts showed that the functionalised samples, both with and without silk fibroin coatings, supported significant increases between 72–136 % in cell metabolism, compared to the controls after 7 days. A 7‐days release profiling showed consistent bacterial inhibition through gentamicin release with average inhibition zones of 239 mm2. Over a 5‐week period, silk fibroin coated samples, both with and without growth factors, supported better human mesenchymal stem cell metabolism with increases reaching 1031 % and 388 %, respectively, compared to samples without the silk fibroin coating with. [ABSTRACT FROM AUTHOR]

Protein-based nanoparticles have gained interest for traversing different biological (e.g., systemic or microenvironmental, etc.) barriers and enabling targeted drug delivery. Silk protein-based nanoparticles are useful and versatile drug delivery systems for sustained and controlled release due to their biocompatibility, biodegradability, accessible chemistries, and ability to stabilize different drugs and other biomolecules. In the present study, silk nanoparticles (SNPs) were engineered using a nanoprecipitation technique with tight control over size (∼45–250 nm diameter) and low polydispersity index by altering variables including stirring speed, reaction bath temperature, silk molecular weight (MW), and silk concentration. Of these variables, stir speed was the most significant contributor toward particle size control. SNPs with positive or negative surface charges and decoration of SNPs with surface antigens were also demonstrated. New mechanistic insights into control of SNP size, cellular uptake using glioblastoma as a model, surface characteristics, and the entrapment of a small-molecule drug (doxorubicin) within the particles were addressed. These insights expand the potential utility of SNPs for medical, environmental, and food applications. [ABSTRACT FROM AUTHOR]

Biocompatible and morphable hydrogels capable of multimode reprogrammable, and adaptive shape changes are potentially useful for diverse biomedical applications. However, existing morphable systems often rely on complicated structural designs involving cumbersome and energy-intensive fabrication processes. Here, we report a simple electric-field-activated protein network migration strategy to reversibly program silk-protein hydrogels with controllable and reprogrammable complex shape transformations. The application of a low electric field enables the convergence of net negatively charged protein cross-linking networks toward the anode (isoelectric point plane) due to the pH gradient generated in the process, facilitating the formation of a gradient network structure and systems suitable for three-dimensional shape change. These tunable protein networks can be reprogrammed or permanently fixed by control of the polymorphic transitions. We show that these morphing hydrogels are capable of conformally interfacing with biological tissues by programming the shape changes and a bimorph structure consisting of aligned carbon nanotube multilayers and the silk hydrogels was assembled to illustrate utility as an implantable bioelectronic device for localized low-voltage electrical stimulation of the sciatic nerve in a rabbit. [ABSTRACT FROM AUTHOR]

The oral cavity contains distinct microenvironments that serve as oral barriers, such as the non‐shedding surface of the teeth (e.g., enamel), the epithelial mucosa and gingival tissue (attached gingiva) where microbial communities coexist. The interactions and balances between these communities are responsible for oral tissue homeostasis or dysbiosis, that ultimately dictate health or disease. Disruption of this equilibrium can lead to chronic inflammation and permanent tissue damage in the case of chronic periodontitis. There are currently no experimental tissue models able to mimic the structural, physical, and metabolic conditions present in the human oral gingival tissue to support the long‐term investigation of host–pathogens imbalances. Herein, the authors report an in vitro 3D anatomical gingival tissue model, fabricated from silk biopolymer by casting a replica mold of an adult human mandibular gingiva to recreate a tooth‐gum unit. The model is based on human primary cultures that recapitulate physiological tissue organization, as well as a native oxygen gradient within the gingival pocket to support human subgingival plaque microbiome with a physiologically relevant level of microbial diversity up to 24 h. The modulation of inflammatory markers in the presence of oral microbiome indicates the humanized functional response of this model and establishes a new set of tools to investigate host–pathogen imbalances in gingivitis and periodontal diseases. [ABSTRACT FROM AUTHOR]

A variety of artificial silk spinning approaches are attempted to mimic the natural spinning process found in silkworms and spiders, yet instantaneous silk fiber formation with hierarchical structure under physiological and ambient conditions without post‐treatment procedures remains unaddressed. Here, this work reports a new strategy to fabricate silk protein‐based aerosols and silk fibers instantaneously in situ using a spray device, avoiding complicated and costly advanced manufacturing techniques. The key to success is the instantaneous conformational transition of silk fibroin from random coil to β‐sheet right before spraying by mixing silk and polyethylene glycol (PEG) solutions in the spray device, allowing aerosols and silk fibers to be sprayed, with further control achieved via the molecular weight of silk. The spinning process of the spray device is based on the use of green solvents, that is, all steps of instant conformational transition of silk fibroin are carried out in aqueous conditions or with buffers at ambient conditions, in combination with shear and elongational flow caused by the hydraulic pressure generated in the spray container. The system supports a portable and user‐friendly system that could be used for drug delivery carriers, wound coating materials, and rapid silk fiber conformal coatings on surfaces. [ABSTRACT FROM AUTHOR]

Aims: The purpose of this systematic review is to determine how various innovative non-suture silk and silk-containing products are being used in clinical practice, and compare patient outcomes following their use. Methods: A systematic review of PubMed, Web of Science, and Cochrane was completed. A qualitative synthesis of all included studies was then performed. Results: Our electronic search identified 868 silk-related publications, which yielded 32 studies for full-text review. After exclusion, nine studies from 2011 to 2018 were included for qualitative analysis. A total of 346 patients were included which consisted of 37 males and 309 females. The mean age range was between 18–79 years old. The follow-up among studies ranged between one to twenty-nine months. Three studies addressed the application of silk in wound dressings, one on the topical application of silk-derived products, one on silk-derived scaffold in breast reconstruction, and three on silk underwear as adjunct for the treatment of gynecological conditions. All studies showed good outcomes alone or in comparison to controls. Conclusion: This systematic review concludes that silk products' structural, immune, and wound-healing modulating properties are advantageous clinical assets. Nevertheless, more studies are needed to strengthen and establish the benefit of those products. [ABSTRACT FROM AUTHOR]

Continuous monitoring of biochemical analytes like oxygen is of interest in biomedicine to provide insight into physiology and health. Silk‐protein biomaterials are particularly useful as the scaffold material in oxygen sensors due to silk's unique amphiphilic chemistry, which promotes noncovalent stabilization of the protein and additives in aqueous environments. Silk films containing a water‐insoluble oxygen‐sensing chromophore, Pd (II) tetramethacrylated benzoporphyrin (PdBMAP), are evaluated as optical oxygen sensors in vitro and in vivo. These silk‐chromophore composites are stabilized by the self‐assembled, physically crosslinked protein network. The deaerated phosphorescence lifetime (τm,0 ≈300 µs) of the chromophore in vitro is quenched to 50% of its initial value at ≈31 µm dissolved oxygen, indicating sensing functionality within physiological ranges of oxygen. In vitro enzymatic degradation of the silk films with and without the chromophore is demonstrated. The silk‐chromophore composite films are cytocompatible in vitro, biocompatible in vivo upon implantation in rats, and displayed mechanical properties suitable for subcutaneous implantation. Further, the films maintain oxygen‐sensing function in vivo and demonstrate real‐time sensing capabilities throughout various physiological states (i.e., hyperoxia, normoxia, and hypoxia). [ABSTRACT FROM AUTHOR]

Ulcerative colitis (UC) is one type of inflammatory bowel disease (IBD) and lactoferrin (LF) is a promising protein drug to treat UC. However, targeted LF delivery to optimize bioavailability, targeting and effectiveness remains a challenge. Here, we report an effective strategy to fabricate silk sericin nanospheres systems for the delivery of recombinant human lactoferrin (SS-NS-rhLF). The system is based on the use of optimized transgenic silkworms to generate genetically engineered silk fibers (rhLF-silks). The rhLF silks were used for fabricating SS-NS-rhLF by ethanol precipitation. The SS-NS-rhLF were stable with a spherical morphology with an average diameter of 123 nm. The negatively charged sericins in a pH ≥ 5.5 environment achieved specific targeting of the SS-NS-rhLF to positively charged colonic sites. The SS-NS-rhLF achieved efficient uptake by cells in the inflamed colon of mice when compared to free lactoferrin in solution (SOL-rhLF). Furthermore, oral administration of the SS-NS-rhLF with low dose of rhLF significantly relived symptoms of UC in mice and achieved comparable therapeutic effect to the high dose of SOL-rhLF by supporting the reformation of cell structure and length of colon tissue, reducing the release of inflammatory factors, inhibiting the activation of the NF-κB inflammatory pathway, and maintaining a stable intestinal microbial population in mice. These results showed that the SS-NS-rhLF is a promising system for colitis treatment. Targeting and effective delivery of multiple biological functional protein human lactoferrin (rhLF) is a promising strategy to treat ulcerative colitis in the clinic. Here, rhLF-transgenic silk cocoons were used to fabricate a rhLF-sericin nanosphere delivery system (SS-NS-rhLF). The fabricated SS-NS-rhLF showed identical spherical morphology, stable structure, sustainable rhLF release, efficient cell uptake and negative charge in an environment of pH above 5.5, thus realized the specific targeting to the positively charged colonic sites to treat UC mice through oral administration. The therapeutic effect of SS-NS-rhLF with a low rhLF dose in the UC mice was comparable to the high dose of free rhLF treatment in solution form, suggesting that the SS-NS-rhLF is a promising system for colitis treatment. [Display omitted] [ABSTRACT FROM AUTHOR]

Regenerated silk fibers typically fall short of silkworm cocoon fibers in mechanical properties due to reduced fiber crystal structure and alignment. One approach to address this has been to employ inorganic materials as reinforcing agents. The present study avoids the need for synthetic additives, demonstrating the first use of exfoliated silk nanofibers to control silk solution crystallization, resulting in all‐silk pseudocomposite fibers with remarkable mechanical properties. Incorporating only 0.06 wt% silk nanofibers led to a ≈44% increase in tensile strength (over 600 MPa) and ≈33% increase in toughness (over 200 kJ kg−1) compared with fibers without silk nanofibers. These remarkable properties can be attributed to nanofiber crystal seeding in conjunction with fiber draw. The crystallinity nearly doubled from ≈17% for fiber spun from pure silk solution to ≈30% for the silk nanofiber reinforced sample. The latter fiber also shows a high degree of crystal orientation with a Herman's orientation factor of 0.93, a value which approaches that of natural degummed B. mori silk cocoon fiber (0.96). This study provides a strong foundation to guide the development of simple, eco‐friendly methods to spin regenerated silk with excellent properties and a hierarchical structure that mimics natural silk. [ABSTRACT FROM AUTHOR]

The exceptional elastic resilience of some protein materials underlies essential biomechanical functions with broad interest in biomedical fields. However, molecular design of elastic resilience is restricted to amino acid sequences of a handful of naturally occurring resilient proteins such as resilin and elastin. Here, we exploit non-resilin/elastin sequences that adopt kinetically stabilized, random coil-dominated conformations to achieve near-perfect resilience comparable with that of resilin and elastin. We also show a direct correlation between resilience and Raman-characterized protein conformations. Furthermore, we demonstrate that metastable conformation of proteins enables the construction of mechanically graded protein materials that exhibit spatially controlled conformations and resilience. These results offer insights into molecular mechanisms of protein elastomers and outline a general conformation-driven strategy for developing resilient and functional protein materials. [ABSTRACT FROM AUTHOR]

[Display omitted] The ability to reverse engineer the silkworm fiber has led to tremendous advancements in the field of silk materials over the last several decades, with silk fibroin materials applied to biomedical, food, and high technology industries. This progress is largely due to the ability to process silk into a regenerated silk fibroin solution that can be engineered into a variety of material formats and stabilized by the reintroduction of the non-covalent native β-sheet protein structure. The next revolution in silk materials involves stabilizing silk fibroin through covalent crosslinking and plasticization. These approaches have transformed silk into a material that is not only strong, but also elastic and flexible, making it compatible with modern fabrication approaches. This has significantly broadened silk material fabrication strategies to include photolithography, digital light processing, and extrusion-based 3D printing. As a result, silk can now be used in a range of applications including ocular prostheses, bio-adhesives, tissue engineering matrices, green biodegradable LEDs and batteries, on-skin and implantable sensors, and bioplastics. In this review, we discuss the evolution of crosslinking in silk materials, focusing on covalent tyrosine- and methacrylate-based crosslinks, and on the structural changes and crosslinking brough about by plasticizing silk using glycerol and calcium ions. We describe how advances in silk crosslinking led to the development of unique materials, paving the way for new fabrication approaches and applications across multiple industries, ushering in a new era of silk materials. [ABSTRACT FROM AUTHOR]

Versatile silk protein-based material formats were studied to demonstrate bioresorbable, implantable optical oxygen sensors that can integrate with the surrounding tissues. The ability to continuously monitor tissue oxygenation in vivo is desired for a range of medical applications. Silk was chosen as the matrix material due to its excellent biocompatibility, its unique chemistry that facilitates interactions with chromophores, and the potential to tune degradation time without altering chemical composition. A phosphorescent Pd (II) benzoporphyrin chromophore was incorporated to impart oxygen sensitivity. Organic solvent-based processing methods using 1,1,1,3,3,3-hexafluoro-2-propanol were used to fabricate: 1) silk-chromophore films with varied thickness and 2) silk-chromophore sponges with interconnected porosity. All compositions were biocompatible and exhibited photophysical properties with oxygen sensitivities (i.e., Stern-Volmer quenching rate constants of 2.7–3.2 × 104 M−1) useful for monitoring physiological tissue oxygen levels and for detecting deviations from normal behavior (e.g., hyperoxia). The potential to tune degradation time without significantly impacting photophysical properties was successfully demonstrated. Furthermore, the ability to consistently monitor tissue oxygenation in vivo was established via a multi-week rodent study. Histological assessments indicated successful tissue integration for the sponges, and this material format responded more quickly to various oxygen challenges than the film samples. [Display omitted] • Bioresorbable, tissue oxygen sensors made of silk and Pd (II) benzoporphyrin • Non-porous films and sponges fabricated using organic solvent processing methods • Photophysical properties offer good interpretability and dynamic range • Sponges exhibit interconnected porosity and excellent tissue integration • Sponges offered consistent performance to external stimuli during in vivo rat study [ABSTRACT FROM AUTHOR]

A silk fibroin (silk) hydrogel was prepared by using diglycidyl ether (BDDE), a chemical crosslinker commonly used to generate Food and Drug Administration (FDA)-approved hyaluronic acid (HA) medical products. The silk/BDDE hydrogels exhibited high elasticity (compressive modulus of 166 ± 15.0 kPa), anti-fatigue properties, and stable structure and mechanical strength in aqueous solution. Chemical crosslinking was conducted in a high concentration (9.3 M) of lithium bromide (LiBr) solution, a salt that is commonly used to dissolve degummed silk fibers during silk solubilization. The unfolded and extended structure of silk molecules with these reaction conditions, as well as the unique ionic environment provided by LiBr facilitated a high degree of crosslinking in the hydrogel. Similar hydrogels were not obtained when the silk was dissolved in other silk fiber-dissolving reagents (e.g., Ajisawa's, formic acid (FA)/LiBr, FA/CaCl 2 solutions), likely because partially folded silk structures and the ionic conditions with these reagents were less favorable for the crosslinking reaction. Based on these findings, silk/BDDE hydrogel spheres were prepared using an oil/water (o/w) emulsification method and biocompatibility and biodegradation were evaluated in vivo , along with other silk gel control systems (e.g., enzyme-catalyzed di-tyrosine and pulverized silk/BDDE gel particles with irregular shapes). Histological and immunohistochemical analyses demonstrated that the silk/BDDE hydrogel spheres were biocompatible and served as a bio-lubricant to treat osteoarthritis (OA). The intra-articular injection of the gel spheres reduced pain as measured with OA rats, reduced cartilage damage and resisted the digestive environment in the articular cavity for extended time frames (>4 weeks), suggesting utility for pain relief and sustained drug release for future OA treatments. [ABSTRACT FROM AUTHOR]

Our goal was to generate functionalized 3D-printed scaffolds for bone regeneration using silk-hydroxyapatite bone cements and osteoinductive, proangiogenic and neurotrophic growth factors or morphogens for accelerated bone formation. 3D printing was utilized to generate macroporous scaffolds with controlled geometries and architectures that promote osseointegration. We build on the knowledge that the osteoinductive factor Bone Morphogenetic Protein-2 (BMP2) can also positively impact vascularization, Vascular Endothelial Growth Factor (VEGF) can impact osteoblastic differentiation, and that Neural Growth Factor (NGF)-mediated signaling can influence bone regeneration. We assessed functions on the 3D printed construct via the osteogenic differentiation of human mesenchymal stem cells; migration and proliferation of human umbilical vein endothelial cells; and proliferation of human induced neural stem cells. The scaffolds provided mechanical properties suitable for bone and the materials were cytocompatible, osteoconductive and maintained the activity of the morphogens and cytokines. Synergistic outcomes between BMP-2, VEGF and NGF in terms of osteoblastic differentiation in vitro were identified, based on the upregulation of genes associated with osteoblastic differentiation (Runt-related transcription factor-2, Osteopontin, Bone Sialoprotein). Additional studies will be required to assess these scaffold designs in vivo. These results are expected to have a strong impact in bone regeneration in dental, oral and maxillofacial surgery. [ABSTRACT FROM AUTHOR]