Search

Recent study has found excellent bulk and surface insulation property of Si 3 N 4 ceramic which make it potential to serve as key insulation component in various energy transmission apparatus. Charge accumulation at gas-solid interface is a critical insulation property but few relevant study on Si 3 N 4 can be found. This contribution has investigated the surface charge property of Si 3 N 4 ceramic compared to traditional insulation polymer under different electrical-thermal stress. Through its comparison with the electric field distribution, the main source of the surface charge accumulation is analyzed, indicating that the superior surface charge suppression performance of Si 3 N 4 lies on its low carrier density and conduction barrier, which considerably prevent charge injection and suppress the normal electric field which drives the charge to the gas-solid interface. The proposed mechanism is also validated by the characterization on conducting and space charge property for Si 3 N 4 as well as dynamic simulation on surface charge accumulation. [ABSTRACT FROM AUTHOR]

As trapping sites for surface charges, the surface trap is an important factor affecting the insulation performance of the epoxy–SF6 interface, which is closely related to the microstructure and its evolution. However, existing studies often ignore the effect of the degradation of the epoxy surface on the surface traps and charge accumulation during the long-term service of the insulation system. In this study, the surface physicochemical evolution and its influence on surface traps of a typical epoxy–SF6 insulation structure were researched under a DC-temperature gradient condition, and an evolution mechanism of surface traps was proposed. The results show that the free radicals introduced during the material degradation process increase the density and depth of both positive and negative charge traps on the epoxy surface. The effect of free radicals formed by the cleavage of epoxy molecules on the electronic orbital and molecular electrostatic potential of epoxy molecules is the intrinsic reason for the evolution of surface trap evolution. This work may help to understand the long-term evolution mechanisms of the physicochemical characteristics of the epoxy–SF6 interface in DC field and may provide a theoretical basis for the long-term failure mechanism revealing and the insulation performance enhancement. [ABSTRACT FROM AUTHOR]

The charge accumulation phenomenon at the gas–solid interface under the co-action of DC electric field and temperature gradient is of great significance, but its long-time evolution characteristics are still unclear. In this work, the accumulation and dissipation characteristics of the surface charge on the epoxy-SF6 interface within 216 h were obtained, indicating that, (a) the normal surface electric field is increased by the temperature gradient along the gas–solid interface, which results in a prominent increase in the surface charge density; (b) there are different evolution processes of surface charge in high and low temperature regions under the co-action of DC-temperature gradient, and the increase of the charge trap density caused by the degradation of solid material is considered to be an important reason for the charge evolution; (c) the total charge dissipation ratio within 600 s decreases with the increase of charging time in DC electric field, and the surface charge dissipates mainly to the gas side of the interface; (d) the large amount of charge accumulated at the interface distorts the surface electric field at the triple junction points. The total electric field strength at the low-temperature tri-junction point increases by 35.5%, while the direction of the tangential field at the high-temperature tri-junction point reverses during the long-time co-action of the DC-temperature gradient. The results of this work may be helpful to understand the long-time charge evolution characteristics of the gas–solid interface under the DC-temperature gradient and to reveal the failure mechanism of the gas–solid interface. [ABSTRACT FROM AUTHOR]

The charge accumulation phenomenon at the gas–solid interface under the co-action of DC electric field and temperature gradient is of great significance, but its long-time evolution characteristics are still unclear. In this work, the accumulation and dissipation characteristics of the surface charge on the epoxy-SF6 interface within 216 h were obtained, indicating that, (a) the normal surface electric field is increased by the temperature gradient along the gas–solid interface, which results in a prominent increase in the surface charge density; (b) there are different evolution processes of surface charge in high and low temperature regions under the co-action of DC-temperature gradient, and the increase of the charge trap density caused by the degradation of solid material is considered to be an important reason for the charge evolution; (c) the total charge dissipation ratio within 600 s decreases with the increase of charging time in DC electric field, and the surface charge dissipates mainly to the gas side of the interface; (d) the large amount of charge accumulated at the interface distorts the surface electric field at the triple junction points. The total electric field strength at the low-temperature tri-junction point increases by 35.5%, while the direction of the tangential field at the high-temperature tri-junction point reverses during the long-time co-action of the DC-temperature gradient. The results of this work may be helpful to understand the long-time charge evolution characteristics of the gas–solid interface under the DC-temperature gradient and to reveal the failure mechanism of the gas–solid interface. [ABSTRACT FROM AUTHOR]

The micron metal particles are inevitably produced in long-term operation condition of high voltage direct current SF6 insulated apparatus, which could frequently cause the surface discharge. Degradation of long-term surface discharge will be a severe threat to the insulation strength. Aiming at this problem, the surface charge accumulation and flashover voltage of epoxy itself before and after discharge degradation by particles were compared in this paper. The composition after degradation was measured by EDS and FTIR. The microstructure was observed by SEM. The roughness was measured as well. The trap distribution was measured by SPD. The mechanism of degradation and its effect on insulation characteristics were analyzed. The results show that the surface charge accumulation increase three times after degradation. Additionally, flashover voltage decreases 19% after degradation. The smoothly surface after degradation decrease the trap energy level for 14%, which might be the change reason of surface charge accumulation and flashover voltage. This paper can offer as a reference for the effect of micron metal particles on insulation degradation in SF6 gas insulated equipment. [ABSTRACT FROM AUTHOR]

DC wall bushing is one of the key equipment in high-voltage direct current (HVDC) transmission project. At present, post insulators based on epoxy composites are widely used for supporting insulation in SF6-insulated apparatus. However, the flashover faults caused by surface charge accumulation can be a severe threat to the long-term operation of the post insulators under dc field. Therefore, the issue of charge accumulation on epoxy post insulators in HVDC wall bushing and its effect on flashover has been widely concerned. Aiming at this problem, the flashover characteristics of epoxy samples in SF6 gas under polarity reversal conditions with dc voltage prestressed for 10–600 min were measured in this article. The flashover process is analyzed through surface charge distribution measurement and electric field computation. The results show that with the increase of prestressed time, the accumulated negative charge density could reach $-14.8\,\,\mu \text{C}/\text{m}^{{2}}$ , which led to a 12% increase in maximum field strength. As a result, the polarity reversal flashover voltage could decrease by 12% and the flashover time delay could decrease by 84.6%. This article can offer as a reference for the effect of surface charge accumulation on flashover in SF6 gas-insulated equipment. [ABSTRACT FROM AUTHOR]

Surface charges have significant impact on the evolution of surface dielectric barrier discharge (SDBD). In this work, the role of residual surface charges on repetitively nanosecond pulsed SDBD in atmospheric air is investigated using a two-dimensional fluid model, based on the assumption of preserving the distribution of surface charges at the end of the previous high voltage (HV) pulse. In the bipolar mode when the polarity of residual surface charges is opposite to that of the current HV pulse, a lower breakdown voltage and more deposited energy can be observed, showing an obvious enhancement of SDBD. In the unipolar mode, residual surface charges suppress the development of discharges and energy deposition. It is found that more residual surface charges are accumulated during the negative pulsed discharge, which have a more pronounced effect on the subsequent positive pulsed one. This is explained by the fact that the negative surface streamers directly contact the dielectric and charge it, while the positive surface streamers float above the dielectric, forming a ion-rich region near the surface. The results in this work demonstrate the mechanism of how residual surface charges affect discharge dynamics, which can be utilized to regulate energy deposition in SDBDs. [ABSTRACT FROM AUTHOR]