Search

A recent focus has been on the recovery of single-cell protein and other nutritionally valuable bioproducts, such as Coenzyme Q10 (CoQ10) from purple non-sulfur bacteria (PNSB) biomass following wastewater treatment. However, due to PNSB's peculiar cell envelope (e.g., increased membrane cross-section for energy transduction) and relatively smaller cell size compared to wellstudied microbial protein sources like yeast and microalgae, the effectiveness of common cell disruption methods for protein quantification from PNSB may differ. Thus, this study examines the efficiency of selected chemical (NaOH and EDTA), mechanical (homogenization and bead milling), physical (thermal and bath/probe sonication), and combined chemical-mechanical/physical treatment techniques on the PNSB cell lysis. PNSB biomass was recovered from the treatment of gas-to-liquid process water. Biomass protein and CoQ10 contents were quantified based on extraction efficiency. Considering singletreatment techniques, bead milling resulted in the best protein yields (p < 0.001), with the other techniques resulting in poor yields. However, the NaOH-assisted sonication (combined chemical/physical treatment technique) resulted in similar protein recovery (p = 1.00) with bead milling, with the former having a better amino acid profile. For example, close to 50% of the amino acids, such as sensitive ones like tryptophan, threonine, cystine, and methionine, were detected in higher concentrations in NaOH-assisted sonication (>10% relative difference) compared to bead-milling due to its less disruptive nature and improved solubility of amino acids in alkaline conditions. Overall, PNSB required more intensive protein extraction techniques than were reported to be effective on other single-cell organisms. NaOH was the preferred chemical for chemicalaided mechanical/physical extraction as EDTA was observed to interfere with the Lowry protein kit, resulting in significantly lower concentrations. However, EDTA was the preferred chemical agent for CoQ10 extraction and quantification. CoQ10 extraction efficiency was also suspected to be adversely influenced by pH and temperature. [ABSTRACT FROM AUTHOR]

This review paper provides an overview of various types of photobioreactors (PBRs) that could be used for the production of polyhydroxyalkanoates (PHAs) using anoxygenic photoheterotrophs, with a focus on the design and operation of these systems. The paper highlights the potential of different PBRs based on reactor geometry and growth mode, and also examines the advantages and disadvantages of each PBR type and summarizes their suitability for PNSB-PHA production. The optimization of reactor design and operation is crucial for maximizing PNSB growth and PHA productivity. The self-immobilization of bacteria in granular sludge is a promising technology for wastewater treatment and the production of PHAs, while grooved-surface PBRs and porous-substrate PBRs have limitations due to difficult biomass harvesting in the former and the presence of aerobic conditions incongruent with PNSB culturing in the latter. Limitations exist with all solutions for maximizing rapid growth and maintaining high biomass concentrations due to the requirements of phototrophic growth. [ABSTRACT FROM AUTHOR]

The availability of agricultural wastewater in arid climes limits the possibility of exploiting purple non‐sulfur bacteria (PNSB) to recover aqua‐feed bioproducts. Thus, this study examines the feasibility of recovering such bioproducts using fuel‐synthesis process water (FSPW) as a feedstock. Experiments were performed under varying light conditions. The results revealed that PNSB cultured in the zero‐nitrogen feedstock had over 40 % protein content, contained substantial lipids and pigments, and reduced FSPW organics by over 70 %. The light intensity significantly impacted biomass constituents and treatment efficiency. The results are promising for the potential development of a circular economy to convert FSPW to aqua‐feed. [ABSTRACT FROM AUTHOR]

Within the frame of this article, briefly but comprehensively, we present the existing knowledge, perspectives, and challenges for the utilization of Layered Double Hydroxides (LDHs) as adsorbents against a plethora of pollutants in aquatic matrixes. The use of LDHs as adsorbents was established by considering their significant physicochemical features, including their textural, structural, morphological, and chemical composition, as well as their method of synthesis, followed by their advantages and disadvantages as remediation media. The utilization of LDHs towards the adsorptive removal of dyes, metals, oxyanions, and emerging pollutants is critically reviewed, while all the reported kinds of interactions that gather the removal are collectively presented. Finally, future perspectives on the topic are discussed. It is expected that this discussion will encourage researchers in the area to seek new ideas for the design, development, and applications of novel LDHs-based nanomaterials as selective adsorbents, and hence to further explore the potential of their utilization also for analytic approaches to detect and monitor various pollutants. [ABSTRACT FROM AUTHOR]