Search

Water distribution systems (WDSs) are massive infrastructure systems designed to supply water from sources to consumers. The optimal operation problem of WDSs is the problem of determining pump and tank operation to meet the consumers' demands with minimal operating cost, under different constraints, which often include hydraulic feasibility, pressure boundaries, and water quality standards. The water quality aspect of WDSs' operation poses significant challenges due to its complex mathematical nature. Determined by mixing in the systems' nodes, it is affected by flow directions, which are subject to change based on the hydraulic state of the system and are therefore difficult to either predict, control, or be included in an analytical model used for optimization. Water age, which is defined as the time water travels in the system until reaching the consumer, is often used as a general water quality indicator—high values of water age imply low water quality, whereas low values of water age usually mean fresher, cleaner, and safer water. In this work, we present the effects that tank operation has on water age. As tanks contain large amounts of water for long periods of time, water tends to age there significantly, which translates into older water being supplied to consumers. By constraining the tank operation, we aim to present the trade-off between water age, tank operation, and operational cost in the WDS optimal operation problem and provide an operational tool that could assist system operators to decide how to operate their system, based on their budget and desired water age boundary. The analysis is applied to three case studies that vary in size and complexity, using MATLAB version R2021b and EPANET 2.2. The presented results show an ability to mitigate high water age in water networks through tank constraints, which varies in accordance with the system's complexity and tank dominance in supply. The importance of a visual tool that serves as a guide for operators to tackle the complex problem of controlling water age is demonstrated as well. [ABSTRACT FROM AUTHOR]

This study examined the utilization of transient shear stress for cleaning sediment and biofilm materials adhered to the inner walls of pipes in water distribution systems. This approach is presented as a potential method for material resuspension during pipe flushing. This is done to prevent discoloration and low-water-quality events, which can be a major concern for both water utilities and consumers. This work builds and expands on previous work on biofilm detachment under unsteady flows. This study explored the manipulation of existing valves to induce high transient shear stresses that, in turn, resuspend materials adhering to the pipe walls. Through the use of valves strategically positioned along the water distribution system, the systems are subjected to consecutive controlled transient pressure waves. It is possible to capitalize on the interference properties of the controlled transient waves at various points in the system. It is in this condition that various pressure waves can merge within the system, causing high pressures and relatively high shear stresses. However, it is vital to keep the pressure confined within the allowed range to ensure the integrity of the system. A Lagrangian with unsteady friction method was implemented and applied for modeling the transient behavior in two water networks. [ABSTRACT FROM AUTHOR]

Applying mechanistic water quality analysis models that are proficient at simulating the dynamics of heterotrophic bacteria within distribution pipes is a pragmatic approach to maintaining biological stability during drinking water distribution systems (DWDS) operation. Accurate interpretation of hydrodynamics and the uncertainties associated with the multifaceted exchanges within the distribution pipes is crucial to the reliability of these models' predictions. However, knowledge about most exchanges within DWDS is still inadequate. Therefore, state-of-the-art mechanistic models exist merely as theoretical frameworks to understand the causes and effects of microbiological quality fluctuations in DWDS, and they lack general applicability. Advancing the applicability and reliability of the mechanistic models necessitates adequate consideration of epistemic and aleatory uncertainties. This study developed mechanistic models to realize the degree of complexity that needs to be integrated into the modeling framework to accurately describe the water quality dynamics in a real-world DWDS. Under the test conditions considered, the simplest single-phase models that ignore the complex exchanges associated with the pipe biofilm layers were found to make similar microbiological quality predictions as the relatively complicated two-phase models. The results indicate that the knowledge uncertainty associated with mechanisms concerning heterotrophic bacterial regrowth in the bulk phase and biofilm detachment in the wall phase is critical in controlling the reliability of the mechanistic water quality models. [ABSTRACT FROM AUTHOR]

The optimal operation of water distribution systems (WDS) is a paramount objective for water utilities due to the substantial energy consumption associated with pumping. A major challenge in optimizing WDS operation is addressing uncertainties such as those related to consumer demands. Real‐time operation under uncertainty necessitates a dynamic approach that can utilize the newly observed information and adjust the operational policy accordingly. This study presents an adjustable robust optimization (ARO) approach to tackle this challenge. Unlike static optimization methods, ARO generates a decision rule policy that is dynamically adjusted as new data becomes available and the operational horizon evolves, thereby ensuring adaptability to changing conditions. Furthermore, the study includes a quantitative analysis of typical demand uncertainty that supports the formulation of the ARO model. The proposed method is evaluated through two case studies and compared with traditional folding horizon approaches. The results indicate that the ARO method is competitive with traditional methods in terms of objective value and surpasses them in terms of robustness. An additional advantage of the method is its offline operation capability which enables it to produce decision rules independent of real‐time programs. This feature facilitates various practical applications such as what‐if analyses, maintenance work planning, and preparation for other special events. Plain Language Summary: The study is focused on developing strategies to optimize the operation of water distribution systems under uncertainty. Pumping and distributing water consumes a lot of energy, therefore water utilities strive to optimize the system's efficiency. This optimization problem involves uncertainties, such as consumer water demands. To address this challenge, a method is developed based on adjustable robust optimization (ARO) theory. Unlike conventional optimization methods that produce a fixed policy for the entire operational horizon, ARO generates an adjustable policy as a decision rule. It creates a dynamic decision‐making policy that can adapt to new data and evolving conditions. The study also includes an analysis to quantify the typical uncertainty associated with water demand which supports the formulation of the ARO model and justifies parts of the theory behind it. The proposed method is tested on two case studies and compared with traditional approaches. Several sensitivity analyses were held to present the ARO advantages and compare it with other methods. The results showed that ARO performs competitively with other methods and outperforms some of them. Key Points: Optimal operation of water distribution systems under uncertainty is addressed with a dynamic, data‐driven approachAn adjustable robust optimization model is developed to provide a decision rule that adapts to the latest revealed informationComparative analysis of the method against traditional folding horizon methods demonstrates superior performance [ABSTRACT FROM AUTHOR]

Maximizing reliability is imperative for water distribution network (WDN) design. Recent claims about providing adequate and operable isolation valves as a focal aspect of a reliable WDN design have attracted substantial interest. In this direction, this paper attempts to answer the question of which isolation valves in a WDN must be prioritized based on their criticality toward enhancing WDN reliability. Two novel algorithms are proposed, one for ranking every isolation valve in a WDN and the second to identify the location of a new isolation valve to reduce the criticality of a specific valve in a WDN. Unlike the prevailing methodologies, the proposed algorithms are entirely based on the topological attributes of a WDN and do not require a calibrated hydraulic model, which is often a limiting factor in WDN management. Our proof of concept has unveiled the capability of the methodology to deliver preliminary information to water utilities regarding the criticality of valves without any hydraulic simulation. [ABSTRACT FROM AUTHOR]

Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views expressed in this Forum article do not necessarily reflect the views of ASCE or the Editorial Board of the journal. [ABSTRACT FROM AUTHOR]

Water distribution network design is a complex multi-objective optimization problem and multi-objective evolutionary algorithms (MOEAs) such as NSGA II have been widely used to solve this optimization problem. However, as networks get larger, NSGA II struggles to find the diverse and uniform solutions that are critical in multi-objective optimization. This research proposes an improved version of NSGA II that uses three new-generation methods to target different regions of the Pareto front and thus increase the number of solutions in critical regions. These methods include saving an archive, local search around extreme and uncrowded Pareto front, and local search around the knee area of the Pareto front. The improved NSGA II is tested on benchmark networks of different sizes and compared to the best-known Pareto front of the networks determined by MOEAs. The results show that the proposed algorithm outperforms the original NSGA II in terms of broadening the Pareto front solution range, increasing solution density, and discovering more non-dominated solutions. The improved NSGA II can find solutions that cover all parts of the Pareto front using a single algorithm without increasing computational effort. [ABSTRACT FROM AUTHOR]

Water distribution systems (WDSs) require high-quality water for safe consumption. To achieve this, disinfectants such as chlorine are often added to the water in the system. However, it is important to regulate the levels of chlorine to ensure they fall within acceptable limits. The higher limit is to control disinfection by-products, while the lower limit is established to guarantee that the water is free of organic contaminants. The rate at which chlorine reacts within the pipes is affected by various factors, such as the type of pipe, its age, the pH level of the water, the temperature, and others. This variability makes it challenging to accurately model water quality in WDSs, which can impact the optimal rate of booster injection. To address the uncertainty in the chlorine reaction rate, the current research proposes a robust counterpart reformulation of the booster chlorination scheduling problem, which considers the chlorination reaction rate as uncertain. The proposed reformulation was tested on two benchmark WDSs and analyzed with a thorough sensitivity analysis. The results showed that as the size of the uncertainty set increased, the injection mass also increased. This reformulated approach can be applied to any WDS and provides a way to obtain optimal scheduling within the desired protection levels. [ABSTRACT FROM AUTHOR]

The operation of water distribution systems (WDS) is an energy-intensive process, which is subject to constraints such as consumer demands, water quality, and pressure domains. As such, tracing an operation policy in which constraints are met while energy costs are minimized, is a foremost objective for water utilities. Given the inherent uncertainties in WDS operation and the importance of supply continuity, it is essential to find an operational strategy that is robust against a wide range of circumstances. One promising approach for optimization under uncertainty is robust optimization (RO), which assures a robust (feasible) solution to realizations of the uncertain parameters, within predefined bounds. This study presents an RO-based method for optimizing pump scheduling under uncertainties of consumer demands and pumping costs. The method can capture various types of correlations between the uncertain parameters, thus better reflecting the uncertain nature of WDS operation. The developed methodology is demonstrated in two case studies with different levels of complexity. The impacts of uncertainty levels and correlation coefficients are analyzed to demonstrate their implications on operation policy. The results show the advantages of using RO with tradeoffs between costs and constraints satisfaction. [ABSTRACT FROM AUTHOR]

A least-cost optimization of a water distribution system (WDS) results in a branched network if some system reliability measures are not considered. Using an explicit level of system redundancy is one way to enhance reliability in the WDS network. This approach consists of first dividing the network into subsystems. Then, during the optimization stage, the subsystems are optimized simultaneously by demanding each one to maintain some level of service. Which pair of subsystems is ultimately selected determines the outcome of the optimization problem. However, there is little if no literature on the optimization of the selection of a pair of subsystems. This study addresses both subsystem and component sizing optimization in designing a level-1 redundant network. Candidate subsystems are enumerated using graph theory where st-numbering for the network is assigned first, and then the backups are generated following the decrement and increment orders of the node's st-numbering. [ABSTRACT FROM AUTHOR]

A key challenge in designing algorithms for leakage detection and isolation in drinking water distribution systems is the performance evaluation and comparison between methodologies using benchmarks. For this purpose, the Battle of the Leakage Detection and Isolation Methods (BattLeDIM) competition was organized in 2020 with the aim to objectively compare the performance of methods for the detection and localization of leakage events, relying on supervisory control and data acquisition (SCADA) measurements of flow and pressure sensors installed within a virtual water distribution system. Several teams from academia and the industry submitted their solutions using various techniques including time series analysis, statistical methods, machine learning, mathematical programming, met-heuristics, and engineering judgment, and were evaluated using realistic economic criteria. This paper summarizes the results of the competition and conducts an analysis of the different leakage detection and isolation methods used by the teams. The competition results highlight the need for further development of methods for leakage detection and isolation, and also the need to develop additional open benchmark problems for this purpose. [ABSTRACT FROM AUTHOR]

Water age is the time taken for water to travel through a distribution system and reach the consumer. Generally, there is a trade-off between water pressure and water age in a water distribution system—higher pressure results in higher flow velocity, which often means shorter traveling time for the water, while lower pressure leads to slower flow and thus higher water age. Low pressure is a desired objective in a distribution system, as it reduces the physical stress on its components and minimizes water losses in the event of a leak. Low water age is a desired objective as well, as increased age is regarded as having a low water quality. Therefore, the two objectives compete with one another. The problem of trying to minimize both water pressure and age is a common problem in water distribution systems' design and management. This paper introduces an algorithm for pressure reducing valves' (PRVs) placement for reducing water age in water distribution systems. The algorithm is based on graph-theory elements and uses EPANET 2.2 for simulation and analysis. The method is demonstrated on two small scale examples, and the results present relatively significant improvements in respect to water age. [ABSTRACT FROM AUTHOR]

The vastness of water distribution systems (WDS) makes them vulnerable to exposure to different types of accidental/intentional contamination. Although most such contamination events that occurred in the recent past were accidental, criminal intent was involved in a few. Considering the accessibility of WDS and the potentially harmful outcomes of drinking-water contamination, online water-quality monitoring sensors are typically positioned in selected locations throughout WDS as a preventive strategy. These sensors, once positioned, communicate over a cyber-infrastructure layer and are liable to cyber-physical attacks—the sensor and/or its communication system becoming compromised or the sensor network becoming malfunctioned such that part of its components is deactivated. However, the sensor network placement state-of-the-art has thus far overlooked these cyber-physical attack scenarios. The current study attempts to overcome this limitation in the state-of-the-art by developing and demonstrating a methodology for evaluating the impact of a cyber-physical attack on a sensor network, compromising its functionality partially. Our proof-of-concept, using a simple network and a straightforward cyber-physical attack scenario, has revealed the vast potential of examining the performance of sensor networks under accidental/intentional malfunctioning and providing valuable information for decision makers in water utilities and regulators. [ABSTRACT FROM AUTHOR]

Contamination events in water distribution systems (WDS) are emergencies that cause public health crises and require fast response by the responsible utility manager. Various models have been developed to explore the reactions of relevant stakeholders during a contamination event, including agent-based modeling. As the COVID-19 pandemic has changed the daily habits of communities around the globe, consumer water demands have changed dramatically. In this study, an agent-based modeling framework is developed to explore social dynamics and reactions of water consumers and a utility manager to a contamination event, while considering regular and pandemic demand scenarios. Utility manager agents use graph theory algorithms to place mobile sensor equipment and divide the network in sections that are endangered of being contaminated or cleared again for water consumption. The status of respective network nodes is communicated to consumer agents in real time, and consumer agents adjust their water demands accordingly. This sociotechnological framework is presented using the overview, design, and details protocol. The results comprise comparisons of reactions and demand adjustments of consumers to a water event during normal and pandemic times, while exploring new methods to predict the fate of a contaminant plume in the WDS. [ABSTRACT FROM AUTHOR]

At the 2013 World Environmental and Water Resources Congress in Cincinnati, Ohio, the ASCE Task Committee on Research Databases for Water Distribution Systems was formed to develop an online open-access repository of water distribution system hydraulic network files for use in applied scientific research. This paper discusses the development of the resulting database, specific model contributions, available model building toolkits, general methods for system classification, and general information related to the database platform and content. It is hoped that the assembled database will promote the advancement of water distribution research into the next decade. [ABSTRACT FROM AUTHOR]

The optimal design of WDS has been extensively researched for centuries, but most of these studies have employed deterministic optimization models, which are premised on the assumption that the parameters of the design are perfectly known. Given the inherently uncertain nature of many of the WDS design parameters, the results derived from such models may be infeasible or suboptimal when they are implemented in reality due to parameter values that differ from those assumed in the model. Consequently, it is necessary to introduce some uncertainty in the design parameters and find more robust solutions. Robust counterpart optimization is one of the methods used to deal with optimization under uncertainty. In this method, a deterministic data set is derived from an uncertain problem, and a solution is computed such that it remains viable for any data realization within the uncertainty bound. This study adopts the newly emerging robust optimization technique to account for the uncertainty associated with nodal demand in designing water distribution systems using the subsystem-based two-stage approach. Two uncertainty data models with ellipsoidal uncertainty set in consumer demand are examined. The first case, referred to as the uncorrelated problem, considers the assumption that demand uncertainty only affects the mass balance constraint, while the second case, referred to as the correlated case, assumes uncertainty in demand and also propagates to the energy balance constraint. [ABSTRACT FROM AUTHOR]

The multi-objective design optimization of water distribution systems (WDS) is to find the Pareto front of optimal designs of WDS for two or more conflicting design objectives. The most popular conflicting objectives considered for the design of WDS are minimization of cost and maximization of resilience index which are considered for the current study. Robust multi-objective optimization is to find the optimal set of the Pareto front considering demand is uncertain. The robustness is controlled by a single parameter that defines the size of the uncertainty set it can vary. The study explores ellipsoidal uncertainty set with different sizes and co-variance matrices. A combined simulation–optimization framework with a combination of self-adaptive multi-objective cuckoo search (SAMOCSA) and the fmincon optimization algorithm is proposed to solve the robust multi-objective design problem. The proposed algorithm is applied to medium and large WDS. The main contribution of this paper is to study the effect of demand uncertainty and the correlation on the WDS designs in a multi-objective framework. The study shows that the inclusion of correlation into the multi-objective design framework can significantly affect the optimal designs. [ABSTRACT FROM AUTHOR]

Accurate interpretation of longitudinal dispersion of solutes within distribution pipes increases the reliability of the predictions of water distribution systems (WDS) water quality analysis models. However, the estimation of longitudinal dispersion from fundamental principles is complicated. Thus, a longitudinal diffusion coefficient, a nonphysical constant depending on the flow and pipe properties, is generally applied to characterize the dispersion mechanism during the advective-dispersive-reactive (ADR) modeling in WDS. Many empirical/semiempirical formulas exist for calculating the coefficient values. Several of them have been applied in WDS water quality modeling research also. However, these formulas have shortcomings concerning overestimating and/or underestimating the longitudinal dispersion coefficient value under transitional/turbulent flow regimes and depicting the transient nature of longitudinal dispersion under laminar flow settings. As yet, no effort has been made to comparatively analyze the implications of the performance of these formulas in ADR modeling in WDS. This paper attempted to critically examine the competence of the prevailing state of the art to accurately represent longitudinal dispersion in pipes from a WDS water quality modeling perspective. The results established that the conceptual dissimilarities in incorporating dispersion memory and transient characteristics between the formulas for laminar regimes have significant impacts on regulating the scale of longitudinal dispersion in the ADR model predictions. The relative variances between the formulas for transitional/turbulent flow settings were found comparatively less significant concerning the ADR model outputs. This study's findings can advance the state of the art to minimize the failure risks involved in simulating the concentration profiles when dispersive transport is dominant over advection in WDS. [ABSTRACT FROM AUTHOR]

Typically, computer-based tools built on mathematical models define the time-series behavior of contaminants, in dissolved or colloidal form, within the spatial boundaries of water distribution systems (WDS). EPANET-MSX has become a standard tool for WDS quality modeling due to its collaboration with EPANET. The critical challenges in applying EPANET-MSX include conceptualizing the exchanges among multiple reacting constituents within the WDS domain and developing the scientific descriptions of these exchanges. Moreover, due to its complicated user interface, the EPANET-MSX application demands programming skills from a software engineering viewpoint. The present study aims to overcome these challenges by developing a novel computer-based tool, EPANET-C. Via built-in and customizable conceptual and mathematical models' directories, EPANET-C simplifies WDS water quality modeling for users, even those lacking programming expertise. Due to its flexibility, EPANET-C can become a de facto standard tool in WDS quality modeling study both for the industry and the academia. [ABSTRACT FROM AUTHOR]

A real-life water distribution system (WDS) contains uncertainty in numerous stages. This makes the optimal management and design of a WDS a complex problem. Water quality has also become a significant factor in the design and management of a WDS. Our objective was to incorporate water quality uncertainty in the WDS design problem. The mixing level was assumed to be uncertain and used to design the WDS such that the design was immune to the level of mixing. This method aimed to yield designs that satisfied the nodal concentration constraints irrespective of the mixing level in the junctions. Two optimization methodologies, robust optimization and info-gap decision theory combined with a cuckoo search optimization algorithm, were proposed to solve this problem. An illustrative example 4×4 grid network was used to understand nonuniform mixing and explain the design methodology using both methodologies. Then these methodologies were applied to solve a similar treatment plant problem on a modified Fossolo network. The results also exhibited a significant variation in cost between complete mixing and nonuniform mixing. The WDS designs obtained from both methods were evaluated through Monte Carlo simulations. [ABSTRACT FROM AUTHOR]

This study presents an approximated model for pressure transient simulations as well as a local wall shear stress analysis to control and dislodge biofilm growth in water distribution systems. It demonstrates the potential of taming hydraulic transients to manage and disrupt the growth of biofilm colonies attached to the inner walls of pipeline systems. The systems are subjected to consecutive controlled transient pressure waves by manipulating valves positioned strategically along the water distribution system. Because the controlled transient waves are generated at different locations in the system, the interference properties of the waves can be capitalized on at points where different pressure waves can come together and merge in the system, thus creating high pressures and powerful shear stresses. Nevertheless, it is vital to keep the head pressure confined within the allowed pressure range to avert extreme devastating pressures and ensure the integrity of the system. Three case study applications of increasing complexity are presented to demonstrate the potential of this approach. These transient wave simulations implemented the Lagrangian-based wave characteristic transient model, and the optimization of valve operation was governed by an evolutionary genetic algorithm. The results indicate that it is possible to trigger transient events for biofilm management purposes without exceeding the allowed critical pressure in various network layouts. [ABSTRACT FROM AUTHOR]

This paper presents a new valve positioning algorithm (VPA) for water network pressure reduction. The proposed algorithm is a graph theory-based algorithm combined with EPANET2.2 to position pressure-reducing valves (PRVs) at the most effective locations, having the most effect on downstream pressure reduction, and then calculates the setpoint for locally controlled valves. Each algorithm solution positions one valve on the edge with the highest-pressure reduction indicator calculated using the depth-first search algorithm. The setpoint is then calculated according to downstream pressure differences to the minimum service pressure to be supplied. The PRV location and setpoint found by the algorithm may be used to install and set locally controlled PRVs or serve as a guide for positioning remote-controlled PRVs. The algorithm is demonstrated on a simple example network using demand-driven analysis (DDA), pressure-driven analysis (PDA), and genetic algorithms (GA) and on a medium and a large example application (DDA). Any number of PRVs may be installed using the algorithm, which returns stable results and very short solution times while maintaining minimum service pressure requirements to the critical consumers. [ABSTRACT FROM AUTHOR]

A mechanistic simulation model predicting the response of water distribution systems (WDSs) operated with or without disinfectant residual toward accidental arsenic contamination is developed in this paper. The impacts of chlorination, chloramination, and organic loading to control the oxidation of arsenous acid [As(III)] and the adsorption/desorption of arsenic acid [As(V)] on/from iron pipe walls were simulated by applying the model to two real-world WDSs. The model predicted that during any As(III) contamination event, the arsenic spread in WDSs would engage conservatively in the absence of a residual disinfectant. Due to the swift reactions between chlorine and As(III), maintaining residual chlorine was recognized as an effective strategy to control the soluble As(III) levels. Chloramine was predicted to be less effective than chlorine in causing As(III) oxidation and subsequent As(V) adsorption onto the pipe wall. Besides, under the test conditions considered, the required chloramine dose in the source water had to be 10 times higher to produce equivalent effects in terms of As(III) depletion as the chlorine dose of 1 mg/L. The results presented that chlorine formation in chloraminated WDSs via the monochloramine hydrolysis mechanism contributes to >99% As(III) depletion inside the distribution pipes. Therefore, the paper recommends maintaining additional chloramine residual in chlorinated WDSs to control the As(III) spread during arsenic contamination events in the downstream sections. [ABSTRACT FROM AUTHOR]

Past water distribution systems (WDS) management studies derived operation protocols to maximize WDS reliability by using residual chlorine as the sole surrogate parameter for water quality reliability. Albeit the advancement in mechanistic modeling to examine the WDS water quality, emerging water quality parameters of concern are not yet involved in solving WDS management problems. This paper attempts to overcome this limitation by developing a flexible decision-making framework -integrating EPANET-C, a mechanistic modeling tool for WDS water quality, with Analytic Hierarchy Process (AHP), a multi-criteria decision-making method - to rank the possible water quality parameter-based operating alternatives (organic matter and residual chlorine levels at the source points) for WDS. The uncertainty analysis was incorporated into the mechanistic modeling using the Monte Carlo method to realize insufficient knowledge about the complex biological and physicochemical interactions inside WDS. Six cases, each ranking the alternatives diversely, were applied to reflect the expert judgment impressions on the AHP outcomes. The consistency of the proposed decision-making framework was verified by deriving the operation protocol for two test networks by making trade-offs between the multiple and conflicting microbiological, chemical, and organoleptic quality criteria. The disinfection by-products formation control and taste and odor problems control emerged as the most critical water quality criteria determining the WDS performance under the operating alternatives examined. Altogether, the obtained results suggested the practicality of adopting a flexible operation protocol to maintain the water quality benchmarks over various plausible WDS performance scenarios, ranging from worst to best. [Display omitted] • General methodology to derive operation protocols for water distribution systems. • All-inclusive water distribution systems quality modeling considering uncertainty. • Flexible decision-making framework based on analytic hierarchy process. • Chemical and organoleptic quality criteria control the hierarchization process. • Flexible operation protocol minimizes contamination risks during operation. [ABSTRACT FROM AUTHOR]

• Analogy between systems biology and water supply engineering for the first time. • Novel strategy for analyzing the changes in delivered drinking water quality. • System-level understanding of the reaction mechanisms within water pipes. • Multiscale-based modeling inspired by the flux balance analysis concepts. • Achieving higher water quality and resource efficiency in water supply management. The complexity of modeling water quality variations in water distribution systems (WDS), studied for decades, stems from multiple constraints and variables involved and the complexity of the system behavior. The conventional macroscale-based WDS water quality models are founded on continuum mechanics. In attempts to provide a broad picture of the multi-species interactions, these models overlook the stochasticity corresponding to the reaction mechanisms within the WDS domain. Furthermore, owing to the black-box type modeling adopted in simulating the multi-species interactions, the existing state-of-the-art models have limitations in representing intermediates and/or by-products formation. Accordingly, they remain ineffective in describing the water chemistry-stoichiometric interactions within the WDS domain. Only a radically new modeling approach could overcome the limitations of the macroscale-based approaches and enables analyzing the stochastic WDS mechanisms by keeping the true nature of the system behavior. Stimulated by the metabolic network modeling principles in systems biology, this article outlines the prospect of developing an innovative 'water'bolic network modeling approach to provide a new outlook to the existing WDS water quality modeling research. [Display omitted] [ABSTRACT FROM AUTHOR]

This study presents the potential of integrating Hydrams in modern water distribution systems (WDSs) for managing excess pressure and reducing energy costs. Hydrams, which are also termed Hydraulic ram pumps in the literature, is a cyclic water pump powered by hydropower, generally used to pump drinking and irrigation water in mountainous and rural areas having short of power. The Hydrams is introduced as a sustainable low-cost alternative solution to the more conventional pressure reducing valves (PRVs) approach for managing pressure zones in WDSs. Unlike PRVs, where the pressure is lost and not put into good use, Hydrams mitigate excess pressure at high-pressure zones and direct it to much-needed low-pressure zones. In addition, Hydrams are cheap, simple, environmentally friendly, and require little maintenance. The proposed approach integrates a Hydram in parallel to the original centrifugal pump, where they can be operated interchangeably according to the system's hydraulic needs. Nevertheless, it is vital to correctly size the Hydram at the feed line and accompany it with a proper storage tank at the low-pressure zone. The storage tank serves as a buffer between the intermittent water supply and consumer demand pattern. Moreover, the tank introduces flexibility into the system that allows more sustainable operating schedules. Two case study applications of increasing complexity are presented to demonstrate the potential of this Hybrid system, later referred to as Hybrid Pumping Unit (HPU). The Hydram and tank sizing is done by a simple heuristic approach, while the operation of the system is dictated by a genetic algorithm. The results demonstrate the potential of integrated Hydrams in reducing excess pressures and energy costs. [ABSTRACT FROM AUTHOR]

Water storage tanks are one of the primary and most critical components of water distribution systems (WDSs), which aim to manage water supply by maintaining pressure. In addition, storage provides a surplus source of water in case of an emergency. To gain the mentioned advantages, storage tanks are incorporated in most WDSs. Despite these advantages, storage can also pose negative impacts on water quality, thereby affecting water utilities. Water quality problems are a result of longer residency times and inadequate water mixing. This study aimed to construct a model of a tank's water quantity and quality by formulating and solving governing equations based on inlet/outlet configurations and processes that influence the movement of water and chemical substances inside it. We used a compartment model to characterize the mixing behavior inside a tank. A water quality simulation model with different compartment arrangements was explored for extended filling and draining of storage, which was further validated using a previously published case study. [ABSTRACT FROM AUTHOR]

Drinking water contamination events in water networks are major challenges which require fast handling by the responsible water utility manager agent, and have been explored in a variety of models and scenarios using, e.g., agent-based modelling. This study proposes to use recent findings during the COVID-19 pandemic outbreak and draw analogies regarding responses and reactions to these kinds of challenges. This happens within an agent-based model coupled to a hydraulic simulation where the decision making of the individual agents is based on a fuzzy logic system reacting to a contamination event in a water network. Upon detection of anomalies in the water the utility manager agent places mobile sensor equipment in order to determine endangered areas in the water network and warn the consumer agents. Their actions are determined according to their social backgrounds, location in the water network and possible symptoms from ingesting contaminated water by utilising a fuzzy logic system. Results from an example application suggest that placing mobile equipment and warning consumers in real time is essential as part of a proper response to a contamination event. Furthermore, social background factors such as the age or employment status of the population can play a vital role in the consumer agents' response to a water event. [ABSTRACT FROM AUTHOR]

• Distribution network as an indirect PFASs contamination and exposure risks source. • Mechanistic model for predicting PFOA fate and transport in the distribution system. • PFASs exposure risks by comparing the simulated PFOA levels with guideline values. • Child population group was found susceptible to PFOA exposure beyond 3 ng/kg/day. • Reducing chlorine dose decreased the PFOA exposure risks in the distribution network. Recent studies identified fluoroalkyl amides (FAs) transformation to perfluorooctanoic acid (PFOA) during disinfection as an indirect source of PFASs contamination of drinking water. This paper discerns the position of water disinfection systems (WDSs) as a PFOA exposure pathway. A new mechanistic model incorporating the derived knowledge about the zwitterionic/cationic FAs transformation to PFOA with the unsteady-state hydraulic characteristics of WDSs was developed. The simulation outputs from model application to a WDS from the USA established the significant role of delivery via distribution network in the PFOA formation in drinking water. PFOA exposure risk assessment studies predicted >95% of the system nodes to be at high risk when the existing stringent health-based guideline values are adopted. The 1 to 3 years and 4 to 8 years old age groups were found susceptible to PFOA exposure through drinking water beyond the tolerable limit of 3 ng/kg/day. The model predicted that reducing the chlorine dose from 2±0.2 to 1±0.1 mg/L at the treatment units drops the share of 1 to 3 years old and 4 to 8 years old consumers falling to PFOA exposure from 4.32 to 0.45% and 0.32 to <0.01%, respectively. Besides, 24.9% more, including ∼x223C10% of the consumers of 1 to 3 years old age group, were found exposed to PFOA risks when the organic loading of water was reduced by 60%. [Display omitted] [ABSTRACT FROM AUTHOR]

• A pragmatic solution to regulating water pressures and leakage by introducing PRVs. • Optimal selection of positions and setpoints of PRVs in a distribution network. • Graph theory-based algorithm employing the depth-first search method. • Pipes leading to the most extended downstream networks are ideal locations for PRVs. • The algorithm maintains the minimum pressure at the minimum required service level. Optimal pressure management is a standard strategy for water loss minimization in water distribution systems (WDS). A pragmatic solution to regulating water pressures and leakage is introducing pressure-reducing valves (PRVs). This paper presents a valve positioning algorithm for optimally deciding the positions and setpoints of PRVs in a WDS. The algorithm derives the hydraulic solution of a WDS as a directed graph, established on the flow directions, using EPANET 2.2 and develops the downstream network supplied by water flowing out of every pipe in the network by applying the depth-first search method. The algorithm later recognizes the pipes leading to the most extended downstream networks, with pressures above the minimum required service pressure, and prioritizes them as the ideal locations for PRV placement. In this way, the proposed algorithm overcomes the limitations of the state-of-the-art in realistically conceptualizing the leakage reduction for optimally positioning the PRVs in WDS. Four studies with varying complexities were selected to demonstrate the algorithm's applicability for deriving pressure management solutions. The solution time for PRV positioning was in seconds for the first three networks and several minutes for the extensive fourth case study. The results corroborate the algorithm's ability to pinpoint the critical nodes with the most increased potential for downstream pressure control and for maintaining the pressure at the least required service pressure level through optimally allocating the PRVs, with acceptable setpoint values, within the pipe network. [Display omitted]. [ABSTRACT FROM AUTHOR]