Search

The dual-stator winding induction generator (DWIG) is an alternative main generator in a variable frequency ac power system. So far, the existing studies have not covered the issue of DWIGs excitation controllability, which is a matter of importance for airworthiness. In this article, we develop an impedance-based modeling and analysis technique to investigate DWIGs excitation controllability. Two related topics are presented: the spontaneous self-excitation analysis in uncontrolled system and the implicit internal self-excitation pattern analysis in actively controlled system. In the topic about spontaneous self-excitation, a virtual impulse source technique is developed to derive the impedance-based method properly in the analysis for uncontrolled DWIG. In the second topic, the analysis performed in the presence of a closed-loop controller figures out the same underlying mechanism in both the plant's open-loop stability and the spontaneous self-excitation. The experimental results verify the proposed analysis and techniques that benefit the comprehensive understanding and practical application of DWIG-based power system. [ABSTRACT FROM AUTHOR]

A novel 24/17-pole 3-phase stator wound field flux switching (SWFFS) machine with the combination of overlapping armature winding (OAW) and asymmetric stator poles (ASP) is proposed for higher torque density in this article. First, the air-gap modulation principle of the 24/17-pole OAW-SWFFS machine is analyzed to better understand its torque production mechanism. Second, since the torque capacity will be greatly restricted by the serious magnetic saturation which is introduced by the OAW configuration, two effective measures are proposed from two perspectives in this article to solve this problem. The first measure is to reduce the magnetic saturation directly by optimizing the area ratio of armature slot and excitation slot, and thus, the torque density can be improved effectively. The second measure is to further enhance the open circuit flux linkages, back electromotive force (EMF), and thus, the torque density by adopting the proposed ASP structure. Furthermore, the accurate ASP distances which are corresponding to the largest back EMF can be obtained effectively based on the air-gap field modulation theory. Finally, the proposed design is validated experimentally by a prototype machine. The simulated and experimental results show that about 25.7% higher torque density can be obtained when compared with 24/14-pole SWFFS machine. [ABSTRACT FROM AUTHOR]

The general rules of rotor pole and armature winding configurations combinations for 24-slot stator wound field flux switching machines (SWFFSMs) are investigated thoroughly in this article. Meanwhile, based on the virtual coil method, a novel general auxiliary evaluation variable, which is proportional to the fundamental amplitude of open-circuit flux-linkage of armature coil is proposed in this article. Hence, these SWFFSMs with larger open-circuit flux-linkage and back-EMF can be obtained effectively. In addition, the effect of rotor poles on the complementarity of armature windings is analyzed so that more sinusoidal and symmetrical back-EMF can be acquired. Furthermore, for these SWFFSMs with larger open-circuit back-EMF, the torque capability is restricted to a considerable extent due to the deep magnetic saturation caused by overlapping armature winding. Hence, a new method by optimizing the ratio of armature slot area and excitation slot area is proposed in this article to ensure that the higher torque density of selected SWFFSMs can be maintained. To verify the validity of analysis and methodology proposed in this article, seven representative SWFFSMs are chosen for verification at no load by the finite-element analysis (FEA) while a 24s/17p SWFFSM with the highest torque density is chosen for further verification at on-load conditions by the FEA and experiments. [ABSTRACT FROM AUTHOR]