Search

Continental shale in China is a key exploration target with regard to unconventional hydrocarbons. Systematic research on the mineral composition, organic geochemistry, and hydrocarbon mobility has been performed in the Da'anzhai (J1dn) lacustrine shale oil reservoirs, clarifying the factors controlling shale oil accumulation. The results suggest that J1dn consists of three sub-members, with an organic-rich interval developed within the second sub-member. Three types of lithological associations have developed within the organic-rich interval: Type 1 represents the interbedding relationship between shale and shell limestone and Type 2 represents shale with intercalated limestone, followed by Type 3. The brittleness index of the J1dn continental organic-rich shale is relatively low. The porosity of the Da'anzhai lacustrine shale ranges between 0.5% and 10.5% (average value of 5.89%). The porosity is predominantly due to inorganic pores, with a small amount being attributable to nanoscale microfractures and organic pores. The average porosity of the shell limestone is only 1.2%, but fractures at the micron and centimeter scales are well developed. The organic matter in the J1dn continental shale is mainly II1–II2, with maturity in the oil generation stage. The average oil saturation of the J1dn continental shale is 3.15%, with most samples having oil saturation of less than 4%. The J1dn continental shale has great exploration potential with regard to shale oil. Type 1 shale oil is affected by multiscale fractures, including bedding fractures, and has the best mobility. The high hydrocarbon generation capacity of lacustrine shale, coupled with the multiscale fractures within shell limestone and shale, is the principal controlling factor for hydrocarbon enrichment. Based on exploration practices, the Type 1 shale association may represent the optimal interval for future shale oil exploration in the Da'anzhai Member. [ABSTRACT FROM AUTHOR]

The Ediacaran Dengying Formation fourth member in Central Sichuan Basin is the deep dolomite gas reservoir with the largest natural gas reserves in China, providing an excellent example for understanding the effect of hydrothermal silicification on deep dolomite reservoir quality. By integrating petrology, geochemistry and physical property measurement, this study aims to reveal the genesis of different quartz phase and their corresponding diagenetic events, and to discuss the temporal relationship of diagenetic events and their effects on the quality of deep dolomite reservoir in Dengying fourth member. Three phases of quartz cement are identified in Ediacaran Dengying Formation deep dolomite reservoirs of Central Sichuan Basin as follows: (1) first‐stage quartz filled in primary reservoir spaces, (2) second‐stage quartz mainly filled in secondary reservoir spaces, and (3) third‐stage quartz filled in secondary reservoir spaces with Mississippi Valley‐Type minerals. By analysing petrographic and temporal relationships between these fabrics, it is suggested that the first‐stage quartz precipitated during the syndiagenetic stage, the second‐stage quartz precipitated during middle diagenetic stage, and the third‐stage quartz precipitated during middle diagenetic stage as well. Silicification during syndiagenetic stage is characterized by replacement of cryptocrystalline quartz and cementation of first‐stage quartz within matrix dolomite (MD). After syndiagenetic silicification, the mineral composition of the MD changed from magnesium calcium carbonate to silica, and the later constructive diagenetic alterations were almost ineffective. The distribution of syndiagenetic silicification during syndiagenetic stage gradually decreases from the platform‐interior to the platform‐margin. The second‐stage and third‐stage quartz cements, derived from two‐stage hydrothermal silicification in the middle stage, are both destructive for reservoir preservation. This study, combined with coeval vapour–liquid inclusions Th data and thermal‐burial models, constrains the time of the second‐stage quartz to ca. 403–408 Ma, suggesting an hydrothermal silicification related to the Caledonian movement. The time of the third‐stage quartz cement is constrained to ca. 259.4 Ma, associated with Late Permian eruption of Emeishan flood basalts. [ABSTRACT FROM AUTHOR]

Organic-rich continental shale, widespread in the Sichuan Basin during the deposition of the Jurassic Dongyuemiao Member (J1d), is considered the next shale hydrocarbon exploration target in southern China. To identify a shale gas sweetspot and reduce exploration risk, it is of great significance to determine the organic matter (OM) enrichment mechanism of J1d shale. In this study, based on sedimentological characteristics and organic matter content, high-resolution major and trace elements were systematically analyzed to demonstrate terrigenous influx, paleoredox, paleosalinity, paleoproductivity, and paleoclimate. The 1st section interval of the J1d 1st submember is dominated by shallow lake subfacies, while the other intervals have the characteristic of semideep to deep lake subfacies. The 1st submember interval of J1d lacustrine shale is characterized by the warmest-humid paleoclimate, strongest weathering degree, highest terrigenous input, moderate paleoproductivity, and paleoredox condition. Within the Dongyuemiao 1st submember, the 4th section interval has the highest paleoproductivity and the most oxygen-deficient condition in bottom water. During the deposition period of the 2nd submember, the sedimentary environment turned to a cold-dry paleoclimate, weak weathering degree, low terrigenous input, low paleosalinity, and high paleoproductivity. Under the background of semideep and deep lake, the terrigenous OM input plays the most critical role in controlling OM enrichment. Moreover, the high primary productivity of lake surface water and the suboxic condition of lake bottom water contribute to the formation of relatively higher TOC lacustrine shale interval in the 4th section of 1st submember. [ABSTRACT FROM AUTHOR]

Deeply buried (>3500 m) marine shale has become a focus point for the future exploration and exploitation of shale hydrocarbon in China. Low-temperature nitrogen adsorption (LTNA), scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), and other experiments were combined to characterize the pore structure and fluid division in deep-marine shale of the southern Sichuan Basin in this study. The results suggest that the deep-marine shale had a relatively developed nanopore network, especially with honeycomb organic pores. These organic pores were largely macropores with good connectivity in three-dimensional space and constituted the major reservoir space of the deep-marine shale gas. Microfractures were predominantly clay-mineral-related fractures, and the development degree of microfractures connected with organic pores was low, which contributed to the preservation of organic pores. Within the deep-marine shale interval, the pore volumes of Section 1 and Section 3 were higher. Pore volume was predominantly contributed by pores above 10 nm, where macropores accounted for a large proportion. Based on a combination of high-speed centrifugation and gradient temperature drying, the pore fluid of deep-marine shale reservoirs was quantitatively classified into four types: clay-bound fluid, capillary-bound fluid, free-flowing fluid, and closed-pore fluid. The clay-bound fluid existed in pores of less than 4.25 nm, which cannot be exploited. Quantitative division of the shale pore system could be realized by using the pore space differences of different types of fluids. [ABSTRACT FROM AUTHOR]

The Xixiangchi Formation is a significant replacement stratum for natural gas production of deep marine carbonate in the Sichuan basin, which is mainly composed of grain shoal. Basic characteristics and corresponding major controlling factors of the Xixiangchi reservoir are of great importance for hydrocarbon exploration, but the diagenesis sequence and evolution of the reservoir are poorly understood because of their complexity. Based on core and thin-section observations, cathodoluminescence (CL), scanning electron microscopy (SEM), and microbiologically induced calcium carbonate precipitation (MICP) data, it is suggested that the Xixiangchi reservoir is comprised of medium crystalline dolostone and grain dolostone in the Central Sichuan basin, with an average porosity of 3.6% and 2.2%, respectively. The corresponding pore-throat type is an intercrystalline pore with a flaky throat and a dissolved intergranular pore with a necking throat. The majority porosity ranges from 2% to 4% (with a distribution frequency of 64.9%), but the permeability distribution is relatively scattered (with a distribution frequency between 10% and 30%). The capillary pressure curve of medium crystalline dolostone is characterized by coarse skewness, relatively flat plateaus, low displacement pressures, and high mercury saturation at relatively low injection pressures. The capillary pressure curve of grain dolostone is characterized by fine skewness, which exhibits relatively poor connectivity and a small value of median pore radius. The deposition of intraplatform grain shoals determines the original property of the Xixiangchi Formation reservoirs. Destructive diagenesis, including compaction and multistage cementation, decreases the physical properties of the Xixiangchi reservoir. Constructive diagenesis, including Caledonian supergene karstification and late-stage burial dissolution, tremendously improves the reservoir quality. [ABSTRACT FROM AUTHOR]