Search

In biomedical studies as well as in clinical trials, it is often useful to have a reliable measure of the force exerted by the body (e.g., clenching force at the teeth or pinch force at fingertips) or on the body by external stimuli (e.g., taps to elicit reflexes or local pressure for nociceptive stimulation). Thin-film sensors such as FlexiForce® provide a very handy and versatile solution for these applications, but can be easily damaged and offer poor accuracy and repeatability, being heavily affected by the surface material they come into contact with. The aim of the study is the realization of a 3D-printed housing that completely embeds the sensor, thus providing mechanical protection and increasing the reliability of the measurement. The increasing availability of 3D printers and of printing materials for medical use allows the user to shape the housing according to specific needs, with short developing time and low cost. [ABSTRACT FROM AUTHOR]

We discuss the effect of topological inhomogeneity of very thin metallic conductometric sensors on their response to external stimuli, such as pressure, intercalation, or gas absorption, that modify the material's bulk conductivity. The classical percolation model was extended to the case in which several independent scattering mechanisms contribute to resistivity. The magnitude of each scattering term was predicted to grow with the total resistivity and diverge at the percolation threshold. We tested the model experimentally using thin films of hydrogenated palladium and CoPd alloys where absorbed hydrogen atoms occupying the interstitial lattice sites enhance the electron scattering. The hydrogen scattering resistivity was found to grow linearly with the total resistivity in the fractal topology range in agreement with the model. Enhancement of the absolute magnitude of the resistivity response in the fractal range thin film sensors can be particularly useful when the respective bulk material response is too small for reliable detection. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to present an efficient design approach for the micro electromechanical systems (MEMS) accelerometers considering design parameters affecting the long-term reliability of these inertial sensors in comparison to traditional iterative microfabrication and experimental characterization approach. Design/methodology/approach: A dual-axis capacitive MEMS accelerometer design is presented considering the microfabrication process constraints of the foundry process. The performance of the MEMS accelerometer is analyzed through finite element method– based simulations considering main design parameters affecting the long-term reliability. The effect of microfabrication process induced residual stress, operating pressure variations in the range of 10 mTorr to atmospheric pressure, thermal variations in the operating temperature range of −40°C to 100°C and impulsive input acceleration at different input frequency values is presented in detail. Findings: The effect of residual stress is negligible on performance of the MEMS accelerometer due to efficient design of mechanical suspension beams. The effect of operating temperature and pressure variations is negligible on energy loss factor. The thermal strain at high temperature causes the sensing plates to deform out of plane. The input dynamic acceleration range is 34 g at room temperature, which decreases with operating temperature variations. At low frequency input acceleration, the input acts as a quasi-static load, whereas at high frequency, it acts as a dynamic load for the MEMS accelerometer. Originality/value: In comparison with the traditional MEMS accelerometer design approaches, the proposed design approach focuses on the analysis of critical design parameters that affect the long-term reliability of MEMS accelerometer. [ABSTRACT FROM AUTHOR]

Chemiresistive MOS-based acetone sensing device is a futuristic pathway for non-invasive diagnosis of diabetes. Although their potential deployment is restricted till now due to lack of selective, low temperature operated ppm-level sensors. In this work, we demonstrated synthesis of iron doped reduced graphene oxide (rGO) decorated WO 3 nanocomposites in a facile, environment friendly wet chemical sol-gel process. The as-synthesized nanocomposites were comprehensively characterized by using different characterization techniques. A maximum ~78% sensing response was obtained for the optimized composition of ~10 wt% Fe doped 3 wt% rGO decorated WO 3 based thin film (thickness ~700 nm) sensor towards ~10 ppm acetone gas. This sensing performance was observed at comparatively low working temperature of ~130 °C with fast response (~20 s) and recovery (~75 s) time. The efficacy of the fabricated sensors was established by their capabilities to sense a very low concentration of ~1 ppm acetone under similar working environment. Further illustration of versatility of the sensors revealed that, the sensors could be able to manifest a repeatable and reproducible sensing performance with prolong stability and superior selectivity for acetone over other interfering gases. The acetone sensing mechanism was illustrated with the help of electron depletion model and impedance spectroscopy study. Impedance spectroscopy quantifies different electrical properties and enlightens the smooth electronic transition mechanism between analyte and sensing material. [Display omitted] • Novel Fe doped reduced graphene oxide (rGO) decorated WO 3 nanocomposite was prepared using a facile sol-gel procedure. • Fabricated Taguchi type thin film sensor exhibited ~ 78 % sensing response towards ~10 ppm acetone at 130°C. • The sensor was also capable to detect very low concentration (~1 ppm) of acetone with fast response and recovery time. • The sensor revealed reproducible performance over time with minimum interference from other interfering gases. • Impedance spectroscopy was used to analyze the sensing mechanism with comprehensive illustration of electrical properties. [ABSTRACT FROM AUTHOR]