Search

This paper reports a detailed study on some relevant portions of the main façades of Caserta Royal Palace (Reggia di Caserta), one of the most important Italian monuments, comparable for its impressive architecture to the Royal Palace of Versailles in France and considered the largest royal palace in the world by volume. The research was focused on the weathering pathologies affecting the stone surfaces that, in the last decades, suffered several detachments of fragments from the coatings and from other architectural elements such as string courses, eaves, and capitals. A preliminary characterization of the materials of the façades and an evaluation of the relative weathering pathologies provided the information required for appropriate restoration and securing of these portions of the building. In particular, an innovative evaluation procedure which draws on techniques typical of the earth sciences allowed the proposal of a 'risk attitude' applied to discrete portions of the geomaterials used in the built heritage which is based on the influence of different factors leading to weakening of the stone and to the final detachment of rock fragments. Such a large and complete set of information should be carefully considered by the project planners to adopt the required steps for a suitable risk mitigation and for securing the site during restoration. [ABSTRACT FROM AUTHOR]

Prosthetic valve endocarditis after transcatheter aortic valve implantation (TAVI) is a rare complication associated with a high mortality rate. Nonetheless, the rapid expansion of TAVI in recent years has proportionally increased the number of patients exposed to the risk of developing transcatheter valve infection. A 71-year-old female with recent history of TAVI was diagnosed with prosthetic valve obstruction secondary to endocarditis. The characteristics of clinical presentation of endocarditis in the balloon-expandable transcatheter valve and the intra-operative findings are discussed with a review of the literature and tips of management. [ABSTRACT FROM AUTHOR]

Flow-like landslides triggered by rainfall are a major concern in the peri-Vesuvian region of southern Italy. On December 19th, 2019, a landslide occurred along the Crocelle slope (Sarno Mountains), which had previously experienced a similar event in February 1986. This study was conducted to assess the characteristics of this event in terms of triggering and propagation conditions and, with reference to the 1986 landslide, to evaluate the evolution of residual landslide hazards at recurring landslide sites. Data collection included field surveys, visual analysis of a Unmanned Aerial Vehicle (UAV)-based photogrammetric model, geotechnical laboratory testing, rainfall and slope stability analysis, and propagation modeling. Results suggest that the landslide i) originated below a trail, ii) involved an initial volume of 450 m3, which did not significantly grow due to the limited entrainment of slope sediments, iii) was initiated after 13 h of rainfall (return period ∼4 years), and iv) propagated along a channel with an estimated velocity of up to 10 m/s. Comparison of the 2019 event with the 1986 event revealed a significant difference in terms of landslide magnitude (i.e., volume), potentially due to the occurrence of multiple events, which may have led to the temporal depletion of available materials along a slope repeatedly affected by landslides, and possibly to the different behavior of primary layered deposits (involved in the 1986 event) compared to reworked deposits (involved in the 2019 event). This suggests a reduction in the residual landslide hazard associated with a decrease in the expected magnitude and frequency of prospective events. • The 2019 Palma Campania landslide was initiated following 13 h of precipitation; • The landslide encompassed reworked pyroclastic deposits underneath a trail; • The landslide propagated within a channel with a velocity of up to 10 m/s; • Slope failure is facilitated by prior hydrological conditions; • Slope-scale landslide hazard potentially decreases due to multiple landslides. [ABSTRACT FROM AUTHOR]

In recent decades, the increasing number and severity of wildfires have become a major concern in many regions of the world. Besides having direct consequences for forests, crops, and settlements, wildfires can have significant effects on the catchment's hydrology, altering their response to rainfall and promoting enhanced runoff and erosion. Increased runoff in burnt areas can result in catastrophic damage and loss of life from destructive debris flows and floods. Although observed in many regions of the world, post-wildfire debris flows/floods seem to prevail in the western USA and southern Europe. In Italy, post-wildfire debris flows/floods have been observed in a number of sectors of the Apennine range, and a total of 113 events occurred between 2001 and 2021 in the Campania region. A recent event occurred on August 24, 2020, in the Fosso delle Pescine catchment, on the southwestern slope of Mt. Omo in the L'Aquila municipality, hit by a severe wildfire at the beginning of the month. The consequences of the event on people and properties indicate the need for an evaluation of debris flow/flood hazard in both pre- and post-wildfire conditions. The analysis of these events may often be complex, requiring time and many input data. In this context, a simplified method of analysis which accounts for event initiation and propagation through a shallow water equation-based approach would represent a new and innovative solution for fast and preliminary debris flow/flood analyses. In this research, a reduced complexity analysis based on probability analysis of rainfall and 2D hydrodynamic modeling was carried out by estimating (i) wildfire extent and severity, (ii) sediment characteristics and availability, (iii) potential runoff induced by rainfall, and (iv) inundation by debris flow/flood. A debris flow/flood hazard model was developed on the basis of multiple return periods (10, 50, 100, and 300 years) for debris flow inundation scenarios derived by non-Newtonian 2D hydrodynamic modeling of debris flow hydrograph and qualitatively validated on the basis of the extent of alluvial fan deposits. Potential drawbacks of the model are related to the possible overestimation of surface runoff, related to the consideration of the whole catchment contributing area, and the limited volumetric sediment budget available at the headwater, which might not sustain a high return period event generation. A debris flow/flood event might originate from rainfall concentrated at the headwater of the catchment. [ABSTRACT FROM AUTHOR]

In the present paper, the capillary barrier formation at the interface between soil layers, which is characterized by textural discontinuities, has been analyzed. This mechanism has been investigated by means of a finite element model of a two-layer soil stratification. The two considered formations, belonging to the pyroclastic succession of the "Pomici di Base" Plinian eruption (22 ka, Santacroce et al., 2008) of the Somma–Vesuvius volcano, are affected by shallow instability phenomena likely caused by progressive saturation during the rainfall events. This mechanism could be compatible with the formation of capillary barriers at the interface between layers of different grain size distributions during infiltration. One-dimensional infiltration into the stratified soil was parametrically simulated considering rainfall events of increasing intensity and duration. The variations in the suction and degree of saturation over time allowed for the evaluation of stability variations in the layers, which were assumed as part of stratified unsaturated infinite slopes. [ABSTRACT FROM AUTHOR]

The “San Michele Arcangelo” historic trail (Aurunci Regional Park, central Italy), located along the southern slope of Mt. Altino, which is highly prone to rockfalls, is hiked every year by thousands of faithful on pilgrimage who are exposed to such kinds of instabilities. To contribute to a better understanding of the condition and evolution of such phenomena, providing a susceptibility scenario able to support the adoption of mitigation measures, a specific analysis was completed based on field and literature data. Three-dimensional virtual outcrop models were obtained through both photogrammetric and iPad Pro LiDAR surveys to derive geomechanical features of outcropping rocks and estimate potential detaching block volume. Possible mechanisms of detachment were then analyzed using the Markland test method. Susceptibility to rockfall propagation and block deposition was analyzed using GIS processing and rockfall propagation simulations based on deterministic/stochastic models. Such models consist of a combination of a deterministic algorithm able to simulate the physics of rockfall movement during propagation and a stochastic treatment of input parameters based on random sampling within defined interval. Two different rockfall simulations were compared in this study using the Rockyfor3D™ (ecorisQ Association) software and the newly developed RocFall3© (RocScience) code. The use of iPad Pro LiDAR survey provides accurate and high-resolution point clouds, with high speed of acquisition and real-time processing of data. Discontinuity sets identified from 3D models have represented the input for kinematic analyses of slopes, allowing to identify potential failure mechanisms among wedge and planar sliding or toppling. Rockfall simulations indicate the potential for rock blocks propagation and deposition over the whole study area. Comparing the results of rockfall simulations with the geomorphological map of the area it is evident the control exerted by the hydrographic network on rockfall propagation as demonstrated by the presence of screes and slope deposits along the main channels. Understanding the potential susceptibility to both propagation and deposition of rock blocks along the trail provides useful indication for the assessment of appropriate mitigation measures to realize for the safer touristic fruition of the site. [ABSTRACT FROM AUTHOR]

Thickness and stratigraphic settings of soils covering slopes potentially control susceptibility to initiation of rainfall-induced shallow landslides due to their local effect on slope hydrological response. Notwithstanding the relevance of the assessment of hazard to shallow landsliding at a distributed scale by approaches based on a coupled modelling of slope hydrological response and slope stability, the spatial variability of soil thickness and stratigraphic settings are factors poorly considered in the literature. Under these premises, this paper advances the well-known case study of rainfall-induced shallow landslides involving ash-fall pyroclastic soils covering the peri-Vesuvian mountains (Campania, southern Italy). In such a unique geomorphological setting, the soil covering is formed by alternating loose ash-fall pyroclastic deposits and paleosols, with high contrasts in hydraulic conductivity and total thickness decreasing as the slope angle increases, thus leading to the establishment of lateral flow and an increase of pore water pressure in localised sectors of the slope where soil horizon thickness is less. In particular, we investigate the effects, on hillslope hydrological regime and slope stability, of irregular bedrock topography, spatial variability of soil thickness and vertical hydraulic heterogeneity of soil horizons, by using a coupled three-dimensional hydrological and a probabilistic infinite slope stability model. The modelling is applied on a sample mountain catchment, located on Sarno Mountains (Campania, southern Italy), and calibrated using physics-based rainfall thresholds derived from the literature. The results obtained under five simulated constant rainfall intensities (2.5, 5, 10, 20 and 40 mm h−1) show an increase of soil pressure head and major failure probability corresponding to stratigraphic and morphological discontinuities, where a soil thickness reduction occurs. The outcomes obtained from modelling match the hypothesis of the formation of lateral throughflow due to the effect of intense rainfall, which leads to the increase of soil water pressure head and water content, up to values of near-saturation, in narrow zones of the slope, such as those of downslope reduction of total soil thickness and pinching out of soil horizons. The approach proposed can be conceived as a further advance in the comprehension of slope hydrological processes at a detailed scale and their effects on slope stability under given rainfall and antecedent soil hydrological conditions, therefore in predicting the most susceptible areas to initiation of rainfall-induced shallow landslides and the related I-D rainfall thresholds. Results obtained demonstrate the occurrence of a slope hydrological response depending on the spatial variability of soil thickness and leading to focus slope instability in specific slope sectors. The approach proposed is conceived to be potentially exportable to other slope environments for which a spatial modelling of soil thickness would be possible. [ABSTRACT FROM AUTHOR]

In recent decades, developing countries have experienced an increase in the impact of natural disasters due to ongoing climate change and the sustained expansion of urban areas. The intrinsic vulnerability of settlements, due to poverty and poor governance, as well as the lack of tools for urban occupation planning and mitigation protocols, has made such impacts particularly severe. Cuenca (Ecuador) is a significant example of a city that in recent decades has experienced considerable population growth (i.e. exposure) and an associated increase in loss due to landslide occurrence. Despite such effects, updated urban planning tools are absent, so an evaluation of multitemporal exposure to landslides and related risks is required. In this perspective, a potential urban planning tool is presented based on updated data depicting the spatial distribution of landslides and their predisposing factors, as well as population change between 2010 and 2020. In addition, a multitemporal analysis accounting for changes in exposure between 2010 and 2020 and an estimation of relative landside risk was carried out. Due to the absence of spatially distributed population data, energy supply contract data have been used as a proxy of the population. The results show that the current higher exposure and related relative risk are estimated for parishes (parroquias) located in the southern sector of the study area (i.e. Turi, Santa Ana, Tarqui, Nulti, Baños and Paccha). Moreover, the exposure multitemporal analysis indicates that most parishes located in the hilly areas bounding the city centre (i.e. Sayausi, San Joaquin, Tarqui, Sidcay, Baños, Ricaurte, Paccha and Chiquintad) are experiencing sustained population growth and will be potentially exposed to an increased risk with a consistently growing trend. The obtained relative risk map can be considered a valuable tool for guiding land planning, land management, occupation restriction and early warning strategy adoption in the area. The methodological approach used, which accounts for landslide susceptibility and population variation through proxy data analysis, has the potential to be applied in a similar context of growing population cities in low- to mid-income countries, where data usually needed for a comprehensive landslide risk analysis are non-existing or only partially available. [ABSTRACT FROM AUTHOR]

[Display omitted] • A new procedure for Groundwater Flooding Hazard (GFH) assessment has been developed. • A newly developed MATLAB™ code for hazard mapping has been provided. • The procedure is based on a probability model depicting long-term water table fluctuation. • A sixty-two-years piezometric time series and basement depths data were used. • The procedure has been tested and validated in a semi-urban aquifer. Many areas of the world are experiencing groundwater flooding (GF) events with serious impacts on the environment and human health. In Europe, GF has received specific attention with the Directive 2007/60/EC, which requires Member States to map GF hazard and risk and propose mitigation measures. In Italy, despite the commitment assigned by the Legislative Decree 49/2010 to River Basin District Authorities, no models have been developed for groundwater flooding hazard (GFH) evaluation also for the lack of standard methods based on commonly available data. In this paper, a new method has been developed through a specific procedure that accounts for i) probability of GF events estimation based on available time series of groundwater levels and ii) probability mapping through a newly developed MATLAB™ code, high-resolution topographic data and groundwater table model. The methodology has been tested and validated in the Metropolitan City of Naples (Italy), affected by GF since 2010, for which i) sixty-two-year long time series of groundwater levels, ii) high-resolution Digital Elevation and Digital Terrain Models and iii) basement/building geometry, are available. The results show that about 59% of the buildings present in the study area have potentially floodable underground structures. In the 2010–2021 period, only 2% of these buildings were flooded and most of them were built in the period 1980–2000, when the piezometric levels were deeper due to over-pumping of the groundwater. The obtained GFH map shows that only 2% of the built area is involved by 1- to 2- year events, while 6% is affected by 1- to 10- year events. A good spatial correspondence between the return period and locations of GF events occurred during 2010–2021 period was observed, thus indicating the significant performance of the model. The obtained GFH map output can support decisions of authorities and policy-makers to reduce the GF risk. [ABSTRACT FROM AUTHOR]

Different interferometric approaches have been developed over the past few decades to process SAR data and recover surface deformation, and each approach has advantages and limitations. Finding an accurate and reliable interval for preparing mean deformation rate maps (MDRMs) remains challenging. The primary purpose of this paper is to implement an application consisting of three unsupervised clustering algorithms (UCAs) for determining the best interval from SAR-derived deformation data, which can be used to interpret long-term deformation processes, such as subsidence, and identify displacement patterns. Considering Port Harcourt (in the Niger Delta) as the study area, it was essential to remove the sources of error in extracting deformation signals from SAR data, spatially ionospheric and tropospheric delays, before using UCAs to obtain its characteristics and real deformation data. Moreover, another purpose of this paper is to implement the advanced integration method (AIM) for atmospheric phase screen (APS) correction to enhance deformation signals obtained through different SAR processing approaches, including interferometric SARs (two-pass interferometry, InSAR) and multitemporal interferometry SARs (n-pass interferometry, DInSAR; permanent scatterer interferometry (PSI); and small baseline subset (SBAS)). Two methods were chosen to evaluate and find the best technique with which to create an MDRM: The first one was to compare the signals corrected by the AIM and the vertical component of the GPS station, which showed the AIM providing 58%, 42%, and 28% of the matching with GNSS station outputs for InSAR, PSI, and SBAS, respectively. Secondly, similarity measures and Davies–Bouldin index scores were implemented to find an accurate and reliable interval in which the SBAS technique with the unsupervised K-medians method has been chosen. Based on GNSS vertical deformation in a 500 m radius around the station, the SBAS K-medians technique expressed up to 5.5% better deformation patterns than the map of SAR processing techniques. [ABSTRACT FROM AUTHOR]

This paper focuses on Deep-Seated Gravitational Slope Deformations (DSGSDs) identified in the Molise region (Italy), along the central-southern sector of the Apennines chain. These phenomena were detected and mapped through a combination of aerial-photo interpretation, morphological analyses, and field surveys, integrated through satellite SAR interferometry (InSAR). The obtained general map is organized in different sections: inventory map with identification of DSGSDs and main geological and orographic features, geostructural scheme, representative cross sections, list and characteristics of DSGSDs, geomorphometric maps, landslides map, and seismotectonic setting. This study allowed us to realize a complete inventory of DSGSDs in the Molise region and define the main characteristics of each phenomenon. Through this research, it was possible to establish a general correlation between the analyzed deformations and the geological and geomorphological setting of the region as well as with its geodynamic context. [ABSTRACT FROM AUTHOR]

This work presents a sinkhole susceptibility and risk assessment mapping in Guidonia-Bagni di Tivoli plain (Italy), a travertine sinkhole-prone area where sudden occurrences of sinkholes have happened in past and recent times. We collected a point-like sinkhole inventory and we considered a series of different sinkholecontrolling and precursory factors over the study area, related to its geo-litho-hydrological setting and to its terrain deformational scenario, i.e. ground motion rates derived from InSAR COSMOSkyMed imagery. A sinkhole susceptibility map was produced through a machine learning model, namely Maximum Entropy algorithm (MaxEnt). Results highlight that the most determining factors for sinkhole formation are the lithology, the travertine thickness, groundwater and the land use. The sinkhole susceptibility map was then combined with data on vulnerability and elements-at-risk economic exposure in order to provide a sinkhole risk map of the area. The outcomes show that areas at higher risk covers about 2% of the total study area and primarily relies on the zoning of the main urban fabric. In particular, it is worth to highlight that 5% of the whole road-network pavement and 27% of all the residential buildings fall into High and Very High risk classes. Overall, results of this work demonstrate capabilities of machine learning models to assess sinkhole susceptibility for predicting potential sinkhole areas, and provide a sinkhole risk map, along with information on urban environment, as a useful tool for urban planning and geohazard risk management. [ABSTRACT FROM AUTHOR]

Many of the UNESCO World Heritage Sites face geological threats which could have negative effects on the value, integrity and accessibility of their heritage assets. A relevant example is the Derwent Valley Mills UNESCO World Heritage site, one of the key sites of Britain's industrial revolution of the 18th century and located along the Derwent River Valley. Individual susceptibility scenarios of natural hazards in the area like collapsible deposits, compressible ground, debris flow, landslide, running sands, shrink-swell, soluble rock and flooding (both riverine and groundwater) are available, but a comprehensive product able to support disaster mitigation measurement and land planning still does not exist. On this basis, a multi-hazard susceptibility analysis was completed with the added benefit of reducing the complexity and providing a methodological framework for multi-hazard estimation. The analysis was completed in a GIS environment through an Analytical Hierarchy Process (AHP) multicriteria decision-making process. Since the AHP method is affected by a user selection bias, a quantitative Relative significance index was derived to rank the AHP factors during the susceptibility estimation. This index suggests that flooding is the principal natural hazard for the Derwent Valley Mills UNESCO World Heritage site. The multi-hazard susceptibility map also indicates that most of the areas where the mills are located are subject to significant susceptibility to natural hazards. [ABSTRACT FROM AUTHOR]

Deep-seated landslides are important agents of relief shaping and can have substantial impact on human settlements. Many examples are present in the Campania region of southern Italy, where the association of complex lithostratigraphic and structural geologic conditions might have effect on landslide initiation and evolution. On this basis and considering the effect that the deep-seated landslide have had in the last years on the urban settlement, the Buonalbergo landslide was analyzed in terms of decadal kinematics and geological control and insights in prospective evolution were provided. The analysis of data derived by geological and landslide field mapping, settlement damage analysis, Persistent Differential Interferometry SAR data analysis, and Finite Elements stability analysis revealed i) the approximately constant rate movement of the landslide in the last three decades with a consistent enlargement of its area, ii) the presence of a large overturned anticline, characterized by a complex lithostratigraphic arrangement and multiple discontinuity sets, iii) the presence of faults responsible for morphological depression development, iv) a rotational mechanism characterizing the upper sector of the landslide and the ongoing translational sliding of blocks located at its toe and v) the effect of potential pore pressure scenarios on prospective kinematics (i.e. single to multiple stages creep) with the observed constant rate movement potentially related to a pore pressure at the landslide base ranging between 300 and 400 kPa. Result interpretation suggests i) the role of the structural and lithostratigraphic setting of the slope as predisposing factor for landslide development, ii) the potential of fold-related fabric in controlling landslide geometry and fragmentation, iii) the possible occurrence of multiple landslide events affecting the slope affected by the deep-seated landslide and iv) the potential of hydrologic conditions in modulating landslide velocity and evolution toward slope failure. The relevance of results is related to the representativeness of the Buonalbergo landslide as common process in the Apennine context in terms of potential long-term morphologic evolution of the slope and the existence of many landslides that develop in similar geological conditions driving sediment production and inducing persistent topographic changes in mountainsides. [ABSTRACT FROM AUTHOR]

This paper presents a new open-source and physically based model for Spatial Prediction of Rainfall-Induced Shallow Landslides (SPRIn-SL) through the Quantum GIS (QGIS) software. SPRIn-SL consists of a set of shell scripts developed using the Python language that can be directly run from the QGIS processing toolbox through a user-friendly graphical interface. The tool implements the infinite slope method by incorporating the TOPOG and the Green-Ampt models to consider groundwater flow and transient rainfall infiltration, respectively. Furthermore, DEM pre-processing procedures to extract reliable terrain morphometric features, a new statistical method for modelling soil depth and a procedure for predictive accuracy evaluation, were implemented. By using a 1-m resolution DEM, the developed model was tested in a small coastal catchment of Cinque Terre (Liguria, Italy), providing accurate outcomes, and proving to be an easy-to-use tool for landslide susceptibility zoning which can have useful implications on the risk reduction. • QGIS module written in Python for spatially predicting shallow landslides. • DEM pre-processing procedures to extract reliable morphometric predisposing factors. • A new statistical method for modelling soil depth is implemented. • High accuracy in simulating rainfall-induced shallow landslides in a test basin. • Easy-to-use physically based tool for landslide susceptibility zoning. [ABSTRACT FROM AUTHOR]

Nowadays, several methodologies, implemented for satellite or terrestrial surveys, reveal that daily and weekly site-positioning time series can exhibit linear trends plus seasonal oscillations. Such periodic components affect the evaluation of subsidence rates and, thus, they must be recognized and properly modelled. In this work, the periodic component of vertical land motion in Po Delta (Northern Italy) is estimated by a multi-component and multi-source procedure recently proposed by some of the authors for studying land subsidence in delta areas. First, land vertical motion data, acquired in the central part of the Po Delta over a six-year time interval, were compared with hydro-meteorological and climate datasets collected from nineteen stations distributed over the entire Delta. Then, four physically based models of the test site were implemented to verify the water pressure- and water mass-dependent processes inferred from the analytical phase. Modelling results show that the annual ground oscillation is better explained by soil moisture change, although river water mass variation gives a relevant contribution to land deformation, especially in the wet periods. Finally, to account for intra-annual processes, the joint contributions of all the inferred sources were treated as a nonlinear problem and solved applying the generalized reduced gradient method. The obtained combination is well supported by statistical parameters and provides the best agreement with the geodetic observations. [ABSTRACT FROM AUTHOR]

B Introduction: b Acute aortic regurgitation (AAR) is a medical emergency with staggering mortality. Echo findings used to stratify AAR severity include equalization of LV and aortic diastolic pressures and a low "pressure half-time" (PHT). In AAR, low left ventricle compliance leads to a lower PHT. [Extracted from the article]

Natural hazards such as landslides, soil erosion and floods are increasingly affecting many regions of the world in relation to ongoing climate change and the abandonment of rural areas. In the last decades, the need to mitigate such phenomena and preserve natural resources, including landscapes, has motivated a number of local and national authorities to promote the use of soil bioengineering techniques. Consequently, these techniques have been increasingly used with variable success rates. This study analysed the efficiencies of different bioengineering structures to mitigate geo-hydrological risks by examining the interventions installed between 2007 and 2013 in the Avellino Province southern Italy. To this end, a specific project consistency analysis and functionality classification were carried out and the causes of inefficiencies were identified. The analysis showed that after a few years, only a small number of the installed bioengineering structures were fully functional and efficient. Overall, the installed structures were generally affected by maintenance issues and in many cases they suffered from design and execution issues, inducing a generally lower degree of efficiency, with most of them classified as 'not very efficient'. The conclusions of this work are that i) the long-term efficiency of a bioengineering structure is related to its correct design, installation, and maintenance; ii) the design of a bioengineering structure should account for the geological, geotechnical and hydrological characteristics of the area of interest, and iii) maintenance must not affect the short-term efficiency of a structure, but may affect the long-term efficiency. • The efficiency of bioengineering structure was analysed. • Bioengineering structure functionality was estimated three years after the installation. • A matrix-based approach accounting for causes of inefficiency was used. • Only 7% of the interventions were fully working and integrated with the landscape. • Most of the bioengineering structures were affected by design and installation issues. [ABSTRACT FROM AUTHOR]