Search

Abstract Developing a deep-learning-based diagnostic model demands extensive labor for medical image labeling. Attempts to reduce the labor often lead to incomplete or inaccurate labeling, limiting the diagnostic performance of models. This paper (i) constructs an attention-guiding framework that enhances the diagnostic performance of jaw bone pathology by utilizing attention information with partially labeled data; (ii) introduces an additional loss to minimize the discrepancy between network attention and its label; (iii) introduces a trapezoid augmentation method to maximize the utility of minimally labeled data. The dataset includes 716 panoramic radiograph data for jaw bone lesions and normal cases collected and labeled by two radiologists from January 2019 to February 2021. Experiments show that guiding network attention with even 5% of attention-labeled data can enhance the diagnostic accuracy for pathology from 92.41 to 96.57%. Furthermore, ablation studies reveal that the proposed augmentation methods outperform prior preprocessing and augmentation combinations, achieving an accuracy of 99.17%. The results affirm the capability of the proposed framework in fine-grained diagnosis using minimally labeled data, offering a practical solution to the challenges of medical image analysis.

Abstract Evaluating the mandibular canal proximity is crucial for planning mandibular third molar extractions. Panoramic radiography is commonly used for radiological examinations before third molar extraction but has limitations in assessing the true contact relationship between the third molars and the mandibular canal. Therefore, the true relationship between the mandibular canal and molars can be determined only through additional cone-beam computed tomography (CBCT) imaging. In this study, we aimed to develop an automatic diagnosis method based on a deep learning model that can determine the true proximity between the mandibular canal and third molars using only panoramic radiographs. A total of 901 third molars shown on panoramic radiographs were examined with CBCT imaging to ascertain whether true proximity existed between the mandibular canal and the third molar by two radiologists (450 molars: true contact, 451 molars: true non-contact). Three deep learning models (RetinaNet, YOLOv3, and EfficientDet) were developed, with performance metrics of accuracy, sensitivity, and specificity. EfficientDet showed the highest performance, with an accuracy of 78.65%, sensitivity of 82.02%, and specificity of 75.28%. The proposed deep learning method can be helpful when clinicians must evaluate the proximity of the mandibular canal and a third molar using only panoramic radiographs without CBCT.

Abstract Background The diagnosis of sialadenitis, the most frequent disease of the salivary glands, is challenging when the symptoms are mild. In such cases, biomarkers can be used as definitive diagnostic indicators. Recently, biomarkers have been developed by extracting and analyzing pathological and morphological features from medical imaging. This study aimed to establish a diagnostic reference for sialadenitis based on the quantitative magnetic resonance imaging (MRI) biomarker IDEAL-IQ and assess its accuracy. Methods Patients with sialadenitis (n = 46) and control subjects (n = 90) that underwent MRI were selected. Considering that the IDEAL-IQ value is a sensitive fat fractional marker to the body mass index (BMI), all subjects were also categorized as under-, normal-, and overweight. The fat fraction of parotid gland in the control and sialadenitis groups were obtained using IDEAL-IQ map. The values from the subjects in the control and sialadenitis groups were compared in each BMI category. For comparison, t-tests and receiver operating characteristic (ROC) curve analyses were performed. Results The IDEAL-IQ fat faction of the control and sialadenitis glands were 38.57% and 23.69%, respectively, and the differences were significant. The values were significantly lower in the sialadenitis group (P), regardless of the BMI types. The area under the ROC curve (AUC) was 0.83 (cut-off value: 28.72) in patients with sialadenitis. The AUC for under-, normal-, and overweight individuals were 0.78, 0.81, and 0.92, respectively. Conclusions The fat fraction marker based on the IDEAL-IQ method was useful as an objective indicator for diagnosing sialadenitis. This marker would aid less-experienced clinicians in diagnosing sialadenitis.

Temporomandibular joint disorders (TMDs) are closely related to the masticatory muscles, but objective and quantitative methods to evaluate muscle are lacking. IDEAL-IQ, a type of chemical shift-encoded magnetic resonance imaging (CSE-MRI), can quantify the fat fraction (FF). The purpose of this study was to develop an MR IDEAL-IQ-based method for quantitative muscle diagnosis in TMD patients. A total of 65 patients who underwent 3 T MRI scans, including CSE-MRI sequences, were retrospectively included. MRI diagnoses and clinical data were reviewed. There were 19 patients in the normal group and 46 patients in the TMD group with unilateral disc displacement. The TMD group was subdivided into those with and without clenching. The right and left FF values of the masseter, medial, and lateral pterygoid muscles were measured twice by two oral radiologists on CSE-MRI, and the average value was used. FF measurements using CSE-MRI showed excellent intra- and inter-observer agreement (ICC > 0.889 for both). There were no statistically significant differences between the right and left FF values in the masseter, medial pterygoid, and lateral pterygoid of the normal group (p > 0.05). A statistically significant difference was found in the TMD group without clenching, in which the masseter muscle had a statistically significantly lower FF value on the disc displacement side (3.94 ± 1.61) than on the normal side (4.52 ± 2.24) (p < 0.05). CSE-MRI, which can reproducibly quantify muscle FF values, is expected to be a biomarker for objective muscle evaluation in TMD patients. The masseter muscle is expected to be particularly useful compared to other masticatory muscles, but further research is needed.

Abstract Cone-beam computed tomography (CBCT) produces high-resolution of hard tissue even in small voxel size, but the process is associated with radiation exposure and poor soft tissue imaging. Thus, we synthesized a CBCT image from the magnetic resonance imaging (MRI), using deep learning and to assess its clinical accuracy. We collected patients who underwent both CBCT and MRI simultaneously in our institution (Seoul). MRI data were registered with CBCT data, and both data were prepared into 512 slices of axial, sagittal, and coronal sections. A deep learning-based synthesis model was trained and the output data were evaluated by comparing the original and synthetic CBCT (syCBCT). According to expert evaluation, syCBCT images showed better performance in terms of artifacts and noise criteria but had poor resolution compared to the original CBCT images. In syCBCT, hard tissue showed better clarity with significantly different MAE and SSIM. This study result would be a basis for replacing CBCT with non-radiation imaging that would be helpful for patients planning to undergo both MRI and CBCT.

Abstract The evaluation of the maxillary sinus is very important in dental practice such as tooth extraction and implantation because of its proximity to the teeth, but it is not easy to evaluate because of the overlapping structures such as the maxilla and the zygoma on panoramic radiographs. When doom-shaped retention pseudocysts are observed in sinus on panoramic radiographs, they are often misdiagnosed as cysts or tumors, and additional computed tomography is performed, resulting in unnecessary radiation exposure and cost. The purpose of this study was to develop a deep learning model that automatically classifies retention pseudocysts in the maxillary sinuses on panoramic radiographs. A total of 426 maxillary sinuses from panoramic radiographs of 213 patients were included in this study. These maxillary sinuses included 86 sinuses with retention pseudocysts, 261 healthy sinuses, and 79 sinuses with cysts or tumors. An EfficientDet model first introduced by Tan for detecting and classifying the maxillary sinuses was developed. The developed model was trained for 200 times on the training and validation datasets (342 sinuses), and the model performance was evaluated in terms of accuracy, sensitivity, and specificity on the test dataset (21 retention pseudocysts, 43 healthy sinuses, and 20 cysts or tumors). The accuracy of the model for classifying retention pseudocysts was 81%, and the model also showed higher accuracy for classifying healthy sinuses and cysts or tumors (98% and 90%, respectively). One of the 21 retention pseudocysts in the test dataset was misdiagnosed as a cyst or tumor. The proposed model for automatically classifying retention pseudocysts in the maxillary sinuses on panoramic radiographs showed excellent diagnostic performance. This model could help clinicians automatically diagnose the maxillary sinuses on panoramic radiographs.

Abstract Quantifying physiological fat tissue in the organs is important to further assess the organ’s pathologic status. This study aimed to investigate the impact of body mass index (BMI), age, and sex on the fat fraction of normal parotid glands. Patients undergoing magnetic resonance imaging (MRI) of iterative decomposition of water and fat with echo asymmetry and least squares estimation (IDEAL-IQ) due to non-salivary gland-related disease were reviewed. Clinical information of individual patients was categorized into groups based on BMI (under/normal/overweight), age (age I/age II/age III), and sex (female/male) and an inter-group comparison of the fat fraction values of both parotid glands was conducted. Overall, in the 626 parotid glands analyzed, the fat fraction of the gland was 35.80%. The mean fat fraction value increased with BMI (30.23%, 35.74%, and 46.61% in the underweight, normal and overweight groups, respectively [p

Abstract This study aimed to develop deep learning models that automatically detect impacted mesiodens on periapical radiographs of primary and mixed dentition using the YOLOv3, RetinaNet, and EfficientDet-D3 algorithms and to compare their performance. Periapical radiographs of 600 pediatric patients (age range, 3–13 years) with mesiodens were used as a training and validation dataset. Deep learning models based on the YOLOv3, RetinaNet, and EfficientDet-D3 algorithms for detecting mesiodens were developed, and each model was trained 300 times using training (540 images) and validation datasets (60 images). The performance of each model was evaluated based on accuracy, sensitivity, and specificity using 120 test images (60 periapical radiographs with mesiodens and 60 periapical radiographs without mesiodens). The accuracy of the YOLOv3, RetinaNet, and EfficientDet-D3 models was 97.5%, 98.3%, and 99.2%, respectively. The sensitivity was 100% for both the YOLOv3 and RetinaNet models and 98.3% for the EfficientDet-D3 model. The specificity was 100%, 96.7%, and 95.0% for the EfficientDet-D3, RetinaNet, and YOLOv3 models, respectively. The proposed models using three deep learning algorithms to detect mesiodens on periapical radiographs showed good performance. The EfficientDet-D3 model showed the highest accuracy for detecting mesiodens on periapical radiographs.

Abstract The detection of maxillary sinus wall is important in dental fields such as implant surgery, tooth extraction, and odontogenic disease diagnosis. The accurate segmentation of the maxillary sinus is required as a cornerstone for diagnosis and treatment planning. This study proposes a deep learning-based method for fully automatic segmentation of the maxillary sinus, including clear or hazy states, on cone-beam computed tomographic (CBCT) images. A model for segmentation of the maxillary sinuses was developed using U-Net, a convolutional neural network, and a total of 19,350 CBCT images were used from 90 maxillary sinuses (34 clear sinuses, 56 hazy sinuses). Post-processing to eliminate prediction errors of the U-Net segmentation results increased the accuracy. The average prediction results of U-Net were a dice similarity coefficient (DSC) of 0.9090 ± 0.1921 and a Hausdorff distance (HD) of 2.7013 ± 4.6154. After post-processing, the average results improved to a DSC of 0.9099 ± 0.1914 and an HD of 2.1470 ± 2.2790. The proposed deep learning model with post-processing showed good performance for clear and hazy maxillary sinus segmentation. This model has the potential to help dental clinicians with maxillary sinus segmentation, yielding equivalent accuracy in a variety of cases.

Abstract Background As the application of cone-beam computed tomography (CBCT) in head and neck area increases for dental treatment purposes, cosmetic filler materials are incidentally observed. Since the materials are very diverse, unnecessary referrals or additional examination may be performed when clinicians are unfamiliar with the imaging findings. Thus, this study aimed to introduce the imaging characteristics of cosmetic fillers and grafts shown in dental CBCT with dental considerations that the clinician should be aware of. Methods CBCT obtained for dental purpose presenting cosmetic material were selected. The location of the material was identified as buccal, retroantral, parotid space, nose, zygoma, and symphysis. The material was classified as single or multiple, and grouped according to morphology: speckle, round, eggshell, linear, and amorphous. The radiopacity was classified as similar to soft tissue, between soft and hard tissue, similar to hard tissue, and metal. Results Twenty-one patients were reviewed, and all patients were female with mean age of 50.5 years. The buccal space was the most frequent location for multiple filler materials. The symphysis was the next frequent location and only single material were shown in this location. Cases having multiple filler showed diverse shapes while all single materials showed round shape. Fillers showing radiopacity of hard tissue were similar to diseases producing soft tissue calcifications. Metal-density material distributed in spaces induced white and dark streak artifacts in the CBCT image. All single materials presented radiopacity between soft and hard tissue and attached to the bone surface causing mandibular bone resorption. Conclusions Cosmetic materials displayed various imaging features in CBCT acquired during dental procedure. Clinicians should consider that cosmetic material may cause mandibular bone resorption and imaging artifacts on CBCT. Knowledge of the imaging characteristics of cosmetic fillers may help correct diagnosis.

Cone-beam computed tomography (CBCT) can provide 3D images of a targeted area with the advantage of lower dosage than multidetector computed tomography (MDCT; also simply referred to as CT). However, in CBCT, due to the cone-shaped geometry of the X-ray source and the absence of post-patient collimation, the presence of more scattering rays deteriorates the image quality compared with MDCT. CBCT is commonly used in dental clinics, and image artifacts negatively affect the radiology workflow and diagnosis. Studies have attempted to eliminate image artifacts and improve image quality; however, a vast majority of that work sacrificed structural details of the image. The current study presents a novel approach to reduce image artifacts while preserving details and sharpness in the original CBCT image for precise diagnostic purposes. We used MDCT images as reference high-quality images. Pairs of CBCT and MDCT scans were collected retrospectively at a university hospital, followed by co-registration between the CBCT and MDCT images. A contextual loss-optimized multi-planar 2.5D U-Net was proposed. Images corrected using this model were evaluated quantitatively and qualitatively by dental clinicians. The quantitative metrics showed superior quality in output images compared to the original CBCT. In the qualitative evaluation, the generated images presented significantly higher scores for artifacts, noise, resolution, and overall image quality. This proposed novel approach for noise and artifact reduction with sharpness preservation in CBCT suggests the potential of this method for diagnostic imaging.

The diagnosis of Chagas disease mostly relies on the use of multiple serologic tests that are often unavailable in many of the remote settings where the disease is highly prevalent. In the Teniente Irala Fernández Municipality, in central Paraguay, efforts have been made to increase the diagnostic capabilities of specific rural health centres, but no quality assurance of the results produced has been performed. We comparatively analysed the results obtained with 300 samples tested using a commercial rapid diagnostic test (RDT) and enzyme linked immunosorbent assays (ELISA) at the laboratory of the Teniente Irala Fernández Health Center (CSTIF) with those generated upon repeating the tests at an independent well-equipped research laboratory (CEDIC). A subgroup of 52 samples were further tested at Paraguay's Central Public Health Laboratory (LCSP) by means of a different technique to evaluate the diagnostic performance of the tests carried out at CSTIF. We observed an excellent agreement between the ELISA results obtained at CSTIF and CEDIC (kappa coefficients between 0.85 and 0.93 for every kit evaluated), and an overall good performance of the tests carried out at CSTIF. However, the sensitivity of one kit was lower at CSTIF (81.3 %) than at CEDIC (100 %). The individual use of an RDT to detect the infection at CSTIF showed a similar sensitivity to that obtained combining it to an ELISA test (92.3% vs 88.5, p = 1). Nonetheless, the generalizability of this result is yet limited and will require of further studies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Background: Home monitoring systems utilising artificial intelligence hold promise for digitally enhanced healthcare in older adults. Their real-world use will depend on acceptability to the end user i.e. older adults and caregivers. We explored the experiences of adults over the age of 60 and their social and care networks with a home monitoring system installed on hospital discharge after sustaining a moderate/severe Traumatic Brain Injury (TBI), a growing public health concern., Methods: A qualitative descriptive approach was taken to explore experiential data from older adults and their caregivers as part of a feasibility study. Semi-structured interviews were conducted with 6 patients and 6 caregivers (N = 12) at 6-month study exit. Data were analysed using Framework analysis. Potential factors affecting acceptability and barriers and facilitators to the use of home monitoring in clinical care and research were examined., Results: Home monitoring was acceptable to older adults with TBI and their caregivers. Facilitators to the use of home monitoring were perceived need for greater support after hospital discharge, the absence of sound and video recording, and the peace of mind provided to care providers. Potential barriers to adoption were reliability, lack of confidence in technology and uncertainty at how data would be acted upon to improve safety at home., Conclusions: Remote monitoring approaches are likely to be acceptable, especially if patients and caregivers see direct benefit to their care. We identified key barriers and facilitators to the use of home monitoring in older adults who had sustained TBI, which can inform the development of home monitoring for research and clinical use. For sustained use in this demographic the technology should be developed in conjunction with older adults and their social and care networks., (© 2024. The Author(s).)