Search

Objectives: To investigate the alveolar bone morphology of the mandibular second and third molars in skeletal Class III patients from a buccolingual direction., Methods: Sixty skeletal Class III patients were recruited. The alveolar bone width, buccal cortical bone thickness and lingual cortical bone thickness were measured in five planes from mesial to distal and at five depths from gingival to root. The effects of the gender of the patients, the second molar lingual inclination and the third molar on alveolar bone width and cortical bone thickness were evaluated. To explore the effect of third molar extraction on alveolar bone morphology, the measurements before and after third molar extraction were compared., Results: The impacted third molar had significantly greater alveolar bone width and thicker buccal cortical bone at the cervical third of the molar, while the erupted third molar had greater alveolar bone width at the apical third. Three weeks after third molar extraction, these advantages would weaken owing to the reconstruction of the alveolar bone. Patients with lingually inclined molar were observed to own thicker lingual cortical bone. Males tended to have greater alveolar bone width, but no significant differences were shown in this study., Conclusions: The growth of the third molar and the second molar lingual inclination affect the alveolar bone morphology of the mandibular second and third molars significantly, but gender has trivial effects on the morphology. The alveolar bone morphology of the mandibular second and third molars would change 3 weeks after third molar extraction., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

The primary function of the tetrapod jaw is to transmit jaw muscle forces to bite points. The routes of force transfer in the jaw have never been studied but can be quantified using load paths - the shortest, stiffest routes from regions of force application to support constraints. Here, we use load path analysis to map force transfer from muscle attachments to bite point and jaw joint, and to evaluate how different configurations of trabecular and cortical bone affect load paths. We created three models of the mandible of the Virginia opossum, Didelphis virginiana, each with a cortical bone shell, but with different material properties for the internal spaces: (1) a cortical-trabecular model, in which the interior space is modeled with bulk properties of trabecular bone; (2) a cortical-hollow model, in which trabeculae and mandibular canal are modeled as hollow; and (3) a solid-cortical model, in which the interior is modeled as cortical bone. The models were compared with published in vivo bite force and bone strain data, and the load paths calculated for each model. The trabecular model, which is preferred because it most closely approximates the actual morphology, was best validated by in vivo data. In all three models, the load path was confined to cortical bone, although its route within the cortex varied depending on the material properties of the inner model. Our analysis shows that most of the force is transferred through the cortical, rather than trabecular bone, and highlights the potential of load path analysis for understanding form-function relationships in the skeleton., Competing Interests: Competing interests The authors declare no competing or financial interests., (© 2024. Published by The Company of Biologists Ltd.)

Geometric morphometrics (GMM) have been applied to understand morphological variation in biological structures. However, research studying cortical bone through geometric histomorphometrics (GHMM) is scarce. This research aims to develop a landmark-based GHMM protocol to depict osteonal shape variation in the femoral diaphysis, exploring the role of age and biomechanics in bone microstructure. Proximal, midshaft, and distal anatomical segments from the femoral diaphysis of six individuals were assessed, with 864 secondary intact osteons from eight periosteal sampling areas being manually landmarked. Observer error was tested using Procrustes ANOVA. Average osteonal shape and anatomical segment-specific variation were explored using principal component analysis. Osteon shape differences between segments were examined using canonical variate analysis (CVA). Sex differences were assessed through Procrustes ANOVA and discriminant function analysis (DFA). The impact of osteonal size on osteonal shape was investigated. High repeatability and reproducibility in osteon shape landmarking were reported. The average osteon shape captured was an elliptical structure, with PC1 reflecting more circular osteons. Significant differences in osteon shape were observed between proximal and distal segments according to CVA. Osteon shape differed between males and females, with DFA showing 52% cross-validation accuracies. No effect of size on shape was reported. Osteonal shape variation observed in this study might be explained by the elderly nature of the sample as well as biomechanical and physiological mechanisms playing different roles along the femoral diaphysis. Although a larger sample is needed to corroborate these findings, this study contributes to the best of our knowledge on human microanatomy, proposing a novel GHMM approach., (© 2024 The Author(s). Journal of Forensic Sciences published by Wiley Periodicals LLC on behalf of American Academy of Forensic Sciences.)

Background: The infrazygomatic crest mini-screw has been widely used, but the biomechanical performance of mini-screws at different insertion angles is still uncertain. The aim of this study was to analyse the primary stability of infrazygomatic crest mini-screws at different angles and to explore the effects of the exposure length (EL), screw-cortical bone contact area (SCA), and screw-trabecular bone contact area (STA) on this primary stability., Methods: Ninety synthetic bones were assigned to nine groups to insert mini-screws at the cross-combined angles in the occlusogingival and mesiodistal directions. SCA, STA, EL, and lateral pull-out strength (LPS) were measured, and their relationships were analysed. Twelve mini-screws were then inserted at the optimal and poor angulations into the maxillae from six fresh cadaver heads, and the same biomechanical metrics were measured for validation., Results: In the synthetic-bone test, the LPS, SCA, STA, and EL had significant correlations with the angle in the occlusogingival direction (r LPS = 0.886, r SCA = -0.946, r STA = 0.911, and r EL = -0.731; all P < 0.001). In the cadaver-validation test, significant differences were noted in the LPS (P = 0.011), SCA (P = 0.020), STA (P = 0.004), and EL (P = 0.001) between the poor and optimal angulations in the occlusogingival direction. The STA had positive correlations with LPS (r s = 0.245 [synthetic-bone test] and r = 0.720 [cadaver-validation test]; both P < 0.05)., Conclusions: The primary stability of the infrazygomatic crest mini-screw was correlated with occlusogingival angulations. The STA significantly affected the primary stability of the infrazygomatic crest mini-screw, but the SCA and EL did not., (© 2024. The Author(s).)

Background: Cortical thickness and porosity are two main determinants of cortical bone strength. Thus, mapping variations in these parameters across the full width of the distal end of the clavicle may be helpful for better understanding the basis of distal clavicle fractures and for selecting optimal surgical treatment., Methods: Distal ends of 11 clavicles (6 men, 5 women; age: 81.9 ± 15.1 years) were scanned by micro-computed tomography at 10-µm resolution. We first analyzed cortical thickness and porosity of each 500-μm-wide area across the superior surface of distal clavicle at the level of conoid tubercle in an antero-posterior direction. This level was chosen for detailed evaluation because previous studies have demonstrated its superior microarchitecture relative to the rest of the distal clavicle. Subsequently, we divided the full width of distal clavicle to three subregions (anterior, middle, and posterior) and analyzed cortical porosity, pore diameter, pore separation, and cortical thickness., Results: We found the largest number of low-thickness and high-porosity areas in the anterior subregion. Cortical porosity, pore diameter, pore separation, and cortical thickness varied significantly among the three subregions (p < 0.001 p = 0.016, p = 0.001, p < 0.001, respectively). Cortex of the anterior subregion was more porous than that of the middle subregion (p < 0.001) and more porous and thinner than that of the posterior subregion (p < 0.001, p = 0.030, respectively). Interaction of site and sex revealed higher porosity of the anterior subregion in women (p < 0.001). The anterior subregion had larger pores than the middle subregion (p = 0.019), whereas the middle subregion had greater pore separation compared with the anterior (p = 0.002) and posterior subregions (p = 0.006). In general, compared with men, women had thinner (p < 0.001) and more porous cortex (p = 0.03) with larger cortical pores (p < 0.001)., Conclusions: Due to high cortical porosity and low thickness, the anterior conoid subregion exhibits poor bone microarchitecture, particularly in women, which may be considered in clinical practice., Levels of Evidence: Level IV., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Purpose: To analyze the visibility of the maxillary sinus septa (MSS) in panoramic radiography (PR) versus cone beam computed tomography (CBCT) and to investigate whether the buccal cortical bone thickness (BT) or the septa dimensions influence their visibility., Methods: Corresponding PR and CBCT images of 355 patients were selected and examined for MSS visibility. The septa dimensions (width, height, depth) and the BT were measured. Results were analysed statistically., Results: Comparing the corresponding regions on CBCT and PR, 170 MSS were identified; however, only 106 of these were also visible using PR. The MSS visibility was significantly higher on CBCT versus PR images (P1: p = 0.039, P2: p = 0.015, M1: p = 0.041, M2: p = 0.017, M3: p = 0.000), except region C (p = 0.625). Regarding the measurements of MSS dimensions, only the height in region M1 (p = 0.013) and the width in region P2 (p = 0.034) were significantly more visible on CBCT. The BT in the area of the MSS was found to have a marginal influence on its visibility on the PR images only in regions M3 and M1 (M3: p = 0.043, M1: p = 0.047). In terms of MSS visibility based on the dimensions, significance was found for all three influencing variables only in region P2 (width; p = 0.041, height; p = 0.001, depth; p = 0.007). There were only isolated cases of further significance: M3 for width (p = 0.043), M2 for height (p = 0.024), and P1 for depth (p = 0.034), no further significance was noted., Conclusion: MSS visibility appears significantly higher on CBCT versus PR images. It is concluded that the septa dimensions and BT can influence MSS visibility on PR images just in certain regions., (© 2024. The Author(s).)

Purpose: To investigate the effects of different cortical bone thickness and jaw bone density at implant sites on intraoperative pain during implant surgery., Methods: One hundred and eighty-seven patients(263 implant sites) who underwent implant placement surgery at the Fourth Affiliated Hospital of Nanchang University from August 2021 to August 2022 were selected to investigate the effects of different cortical bone thickness and jaw bone density HU values at implant sites on the anesthetic effect under local infiltration anesthesia with epinephrine in articaine. SPSS 26.0 software package was used for data analysis., Results: The mean cortical bone thickness at the painful sites[(3.90±1.36) mm] was significantly greater than that at the non-painful sites [(2.24±0.66) mm], and the difference was statistically significant(P＜0.05). The differences in cortical bone thickness in the mandibular anterior, premolar, and molar regions were statistically significant in the comparison of pain and non-pain sites. The mean HU value of bone density was (764.46±239.75) for the painful sites and (612.23±235.31) for the non-painful sites, with significant difference(P＜0.05). The difference was not significant(P＞0.05) when comparing the HU values of painful sites with non-painful sites in the mandibular anterior teeth and anterior molar region, while the difference was significant(P＜0.05) when comparing the HU values of painful sites with non-painful sites in the mandibular molar region., Conclusions: Sites with large cortical bone thickness have a greater effect on blocking infiltrative anesthetic penetration and are more prone to intraoperative pain during implantation. In the mandibular anterior and premolar regions, the HU value of the implant sites had less effect on infiltrative anesthetic penetration, and the effect was greater in the mandibular molar region, and the implant sites with high HU values in the mandibular molar region were more likely to have intraoperative pain. When the cortical bone thickness in the planned implant site is greater than 3.9 mm and the mean bone density in the mandibular molar region is greater than 665 HU. If there is sufficient safe distance for hole operation, it is recommended to apply mandibular nerve block anesthesia combined with articaine infiltration anesthesia to avoid intraoperative pain and bad surgical experience for the patients.

The use of ovine animal models in the study of injury biomechanics and modeling is increasing, due to their favorable size and other physiological characteristics. Along with this increase, there has also been increased interest in the development of in silico ovine models for computational studies to compliment physical experiments. However, there remains a gap in the literature characterizing the morphological and mechanical characteristics of ovine ribs. The objective of this study therefore is to report anatomical and mechanical properties of the ovine ribs using microtomography (micro-CT) and two types of mechanical testing (quasi-static bending and dynamic tension). Using microtomography, young ovine rib samples obtained from a local abattoir were cut into approximately fourteen 38 mm sections and scanned. From these scans, the cortical bone thickness and cross-sectional area were measured, and the moment of inertia was calculated to enhance the mechanical testing data. Based on a standard least squares statistical model, the cortical bone thickness varied depending on the region of the cross-section and the position along the length of the rib (p < 0.05), whereas the cross-sectional area remained consistent (p > 0.05). Quasi-static three-point bend testing was completed on ovine rib samples, and the resulting force-displacement data was analyzed to obtain the stiffness (44.67 ± 17.65 N/mm), maximum load (170.54 ± 48.28 N) and displacement at maximum load (7.19 ± 2.75 mm), yield load (167.81 ± 48.12 N) and displacement at yield (6.10 ± 2.25 mm), and the failure load (110.90 ± 39.30 N) and displacement at failure (18.43 ± 2.10 mm). The resulting properties were not significantly affected by the rib (p > 0.05), but by the animal they originated from (p < 0.05). For the dynamic testing, samples were cut into coupons and tested in tension with an average strain rate of 18.9 strain/sec. The resulting dynamic testing properties of elastic modulus (5.16 ± 2.03 GPa), failure stress (63.29 ± 14.02 MPa), and failure strain (0.0201 ± 0.0052) did not vary based on loading rate (p > 0.05)., (© 2023. The Author(s) under exclusive licence to Biomedical Engineering Society.)

Skeletal pneumaticity is a key feature of extant avian structure and biology, which first evolved among the non-flying archosaurian ancestors of birds. The widespread presence of air-filled bones across the postcranial skeleton is unique to birds among living vertebrates, but the true extent of skeletal pneumaticity has never been quantitatively investigated-hindering fundamental insights into the evolution of this key avian feature. Here, we use microCT scans of fresh, frozen birds to directly quantify the fraction of humerus volume occupied by air across a phylogenetically diverse taxon sample to test longstanding hypotheses regarding the evolution and function of avian skeletal pneumatization. Among other insights, we document weak positive allometry of internal air volume with humeral size among pneumatized humeri and provide strong support that humeral size, body mass, aquatic diving, and the presence or absence of pneumaticity all have independent effects on cortical bone thickness. Our quantitative evaluation of humeral pneumaticity across extant avian phylogeny sheds new light on the evolution and ontogenetic progression of an important aspect of avian skeletal architecture, and suggests that the last common ancestor of crown birds possessed a highly pneumatized humerus.

Objectives: This study aimed to find out the correlation between different anatomical parameters of the mandible and the occurrence of a bad split in patients who had undergone bilateral split sagittal ramus osteotomy (BSSRO)., Materials and Method: At both the distal roots of the first molar (1) and the retromolar area (2), we measured the distance from the buccal margin of the inferior dental canal (IDC) to the buccal margin of the cortical bone (MCBC), the thickness of both buccal cortical (WBCB) and cancellous bone (WBCA), distance from the superior border of IDC to the alveolar crest (MCAC), buccolingual thickness (BLT), and thickness of cancellous bone (WCA). At the ramus, the distances between the sigmoid notch to the upper part of the lingula (SL) and the inferior border of the mandible (SIBM), the thickness of the ramus at the level of the lingula (BLTR), and the anteroposterior width of the ramus (APWR) were measured. The paired and independent t-tests were used when applicable, and a P-value < 0.05 was considered significant., Results: MCBC1 showed a significant difference between bad and non-bad split sides (P = 0.037). Both WBCA1 and WBCA2 show the same significant difference (P = 0.023, 0.024). Similarly, WCA1 and WCA2 showed a statistical difference between the bad and non-bad split sides (P = 0.027, 0.036). There were no statistically significant differences between the compared sides of WBCB1, WBCB2, MCAC1, MCAC2, SIBM, APWR, SL, and BLTR., Conclusion: Narrow space between IDC and the buccal cortical margin, along with the decrease in the thickness of both buccal cancellous bone and total cancellous bone at the inferior border of the mandible along the course of SSRO, has been implicated in the occurrence of bad split intraoperatively., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Age-related changes in bone microstructure can inform our understanding the biology of both extant and fossil birds, but to date, histological work in birds, and particularly work using high-resolution 3D imaging, has largely been restricted to limited growth stages. We used minimally destructive synchrotron radiation-based X-ray computed tomography to visualise and measure key morphological and histological traits in 3D across development in the domestic duck and ring-necked pheasant. We use these measurements to build on the database of key reference material for interpreting bone histology. We found that growth patterns differed between the two species, with the ducks showing rapid growth in their lower limbs and early lower limb maturation, while pheasants grew more slowly, reflecting their later age at maturity. In the pheasant, both walking and flight occur early and their upper and lower limbs grew at similar rates. In the duck, flight and wing development are delayed until the bird is almost at full body mass. Through juvenile development, the second moment of area for the duck wing was low but increased rapidly towards the age of flight, at which point it became significantly greater than that of the lower limb, or the pheasant. On a microstructural level, both cortical porosity and canal diameter were related to cortical bone deposition rate. In terms of orientation, vascular canals in the bone cortex were more laminar in the humerus and femur compared with the tibiotarsus, and laminarity increased through juvenile development in the humerus, but not the tibiotarsus, possibly reflecting torsional vs compressive loading. These age-related changes in cortical bone vascular microstructure of the domestic duck and pheasant will help understanding the biology of both extant and fossil birds, including age estimation, growth rate and growth patterns, and limb function., (© 2022 The Authors. Journal of Anatomy published by John Wiley & Sons Ltd on behalf of Anatomical Society.)