Search

Time-delay cosmography is a powerful technique to constrain cosmological parameters, particularly the Hubble constant ($H_{0}$). The TDCOSMO collaboration is performing an ongoing analysis of lensed quasars to constrain cosmology using this method. In this work, we obtain constraints from the lensed quasar WGD 2038-4008 using new time-delay measurements and previous mass models by TDCOSMO. This is the first TDCOSMO lens to incorporate multiple lens modeling codes and the full time-delay covariance matrix into the cosmological inference. The models are fixed before the time delay is measured, and the analysis is performed blinded with respect to the cosmological parameters to prevent unconscious experimenter bias. We obtain $D_{\Delta t} = 1.68^{+0.40}_{-0.38}$ Gpc using two families of mass models, a power-law describing the total mass distribution, and a composite model of baryons and dark matter, although the composite model is disfavored due to kinematics constraints. In a flat $\Lambda$CDM cosmology, we constrain the Hubble constant to be $H_{0} = 65^{+23}_{-14}\, \rm km\ s^{-1}\,Mpc^{-1}$. The dominant source of uncertainty comes from the time delays, due to the low variability of the quasar. Future long-term monitoring, especially in the era of the Vera C. Rubin Observatory's Legacy Survey of Space and Time, could catch stronger quasar variability and further reduce the uncertainties. This system will be incorporated into an upcoming hierarchical analysis of the entire TDCOSMO sample, and improved time delays and spatially-resolved stellar kinematics could strengthen the constraints from this system in the future., Comment: 8 pages, 5 figures, 3 tables; accepted for publication in Astronomy & Astrophysics

Recent studies of wide binary stars based on Gaia DR3 suggest that the relative orbital velocities of objects with separations s > 3'000 astronomical units are statistically larger than the standard Newtonian predictions. Obviously there is no Dark Matter halo arround binary stars that could be invoked to explain these high velocities. However, we explore the properties of two-body systems in the framework of scale invariant vacuum theory, focusing on the case of objects with extreme separations. In this regime, the additional acceleration term present in the modified Newton equation with scale invariance becomes important, and may even dominate the dynamical evolution at very low gravities. Comparisons with Gaia DR3 observations of wide binaries are performed and suggest that binaries with separations s > 3'000 astronomical units have experienced such an evolution for a few Gyr, accounting well for the observed velocity excesses., Comment: 17 pages, 3 figures

As ground-based all-sky astronomical surveys will gather millions of images in the coming years, a critical requirement emerges for the development of fast deconvolution algorithms capable of efficiently improving the spatial resolution of these images. By successfully recovering clean and high-resolution images from these surveys, the objective is to deepen the understanding of galaxy formation and evolution through accurate photometric measurements. We introduce a two-step deconvolution framework using a Swin Transformer architecture. Our study reveals that the deep learning-based solution introduces a bias, constraining the scope of scientific analysis. To address this limitation, we propose a novel third step relying on the active coefficients in the sparsity wavelet framework. We conducted a performance comparison between our deep learning-based method and Firedec, a classical deconvolution algorithm, based on an analysis of a subset of the EDisCS cluster samples. We demonstrate the advantage of our method in terms of resolution recovery, generalisation to different noise properties, and computational efficiency. The analysis of this cluster sample not only allowed us to assess the efficiency of our method, but it also enabled us to quantify the number of clumps within these galaxies in relation to their disc colour. This robust technique that we propose holds promise for identifying structures in the distant universe through ground-based images., Comment: 11 pages, 14 figures

A quadruply lensed source, J125856.3-031944, has been discovered using the DELVE survey and WISE W1 - W2 colors. Followup direct imaging carried out with the MPIA 2.2 m and the Baade 6.5 m telescopes is analyzed, as is spectroscopy from the 2.5 m Nordic Optical Telescope. The lensed image configuration is kite-like, with the faintest image 2 magnitudes fainter than the other three. Redward of 6000 AA that image is badly blended with the lensing galaxy, which is elongated along the symmetry axis of the kite. Magellan direct imaging carried out in Sloan g permits better deblending. As the lensed image configuration is nearly circular, simple models give individual magnifications of at least 25 for the 3 brighter images. The source's narrow emission lines and low intrinsic luminosity qualify it as a type 2 AGN., Comment: 8 pages, 5 figures, submitted to AJ, comments welcome

We study the path of light rays passing near a massive object, in the context of the scale invariant equation of the geodesics first obtained by Dirac (1973). Using the exterior Schwarzschild solution for the metric, we derive the complete equations of the geodesics in the scale invariant context. We find that scale invariance introduces two additional terms to the Einstein term producing the deflection angle and that can potentially act over cosmological distances. Numerical integration of the scale-invariant geodesics, for the specific case of the z_L=1.94 lens galaxy in the extreme system JWST-ER1 (van Dokkum et al. 2023; Mercier et al. 2024) shows that the two additional terms introduce only negligible effects, typically 1E-06 of the Einstein term. We conclude that the lensing deflection angle derived in Einstein's General Relativity is essentially independent of the scale invariant effects and that the photon's geodesics remain unchanged. We also explore the possible origin of the differences in the mass estimates from lensing and photometry in JWST-ER1 and in the SLACS galaxies, differences which appear larger at higher redshifts. Scale invariance appears to release or even suppress the need for dark matter., Comment: 19 pages, 2 figures

We present STARRED, a Point Spread Function (PSF) reconstruction, two-channel deconvolution, and light curve extraction method designed for high-precision photometric measurements in imaging time series. An improved resolution of the data is targeted rather than an infinite one, thereby minimizing deconvolution artifacts. In addition, STARRED performs a joint deconvolution of all available data, accounting for epoch-to-epoch variations of the PSF and decomposing the resulting deconvolved image into a point source and an extended source channel. The output is a deep sharp frame combining all data, and the photometry of all point sources in the field of view as a function of time. Of note, STARRED also provides exquisite PSF models for each data frame. We showcase three applications of STARRED in the context of the imminent LSST survey and of JWST imaging: i) the extraction of supernovae light curves and the scene representation of their host galaxy, ii) the extraction of lensed quasar light curves for time-delay cosmography, and iii) the measurement of the spectral energy distribution of globular clusters in the "Sparkler", a galaxy at redshift z=1.378 strongly lensed by the galaxy cluster SMACS J0723.3-7327. STARRED is implemented in JAX, leveraging automatic differentiation and GPU acceleration. This enables rapid processing of large time-domain datasets, positioning the method as a powerful tool for extracting light curves from the multitude of lensed or unlensed variable and transient objects in the Rubin-LSST data, even when blended with intervening objects., Comment: 20 pages, 11 figures, 3 Tables. Published in the Astronomical Journal

Strong gravitational lenses provide unique laboratories for cosmological and astrophysical investigations, but they must first be discovered - a task that can be met with significant contamination by other astrophysical objects and asterisms. Here we review strong lens searches, covering various sources (quasars, galaxies, supernovae, FRBs, GRBs, and GWs), lenses (early- and late-type galaxies, groups, and clusters), datasets (imaging, spectra, and lightcurves), and wavelengths. We first present the physical characteristics of the lens and source populations, highlighting relevant details for constructing targeted searches. Search techniques are described based on the main lensing feature that is required for the technique to work, namely one of: (i) an associated magnification, (ii) multiple spatially-resolved images, (iii) multiple redshifts, or (iv) a non-zero time delay between images. To use the current lens samples for science, and for the design of future searches, we list several selection biases that exist due to these discovery techniques. We conclude by discussing the future of lens searches in upcoming surveys and the new population of lenses that will be discovered., Comment: 54 pages, 15 figures, submitted to Space Science Reviews, Topical Collection "Strong Gravitational Lensing", eds. J. Wambsganss et al

We report the discovery of PSJ2107-1611, a fold-configuration 4.3"-separation quadruply lensed quasar with a bright lensed arc. It was discovered using a convolutional neural network on Pan-STARRS gri images of pre-selected quasar candidates with multiple nearby Pan-STARRS detections. Spectroscopic follow-up with EFOSC2 on the ESO 3.58m New Technology Telescope reveals the source to be a quasar at z = 2.673, with the blended fold image pair showing deformed broad lines relative to the other images. The flux ratios measured from optical to near-infrared imaging in the Canada-France-Hawaii Telescope Legacy Survey, Pan-STARRS, the Legacy Surveys, and the Vista Hemisphere Survey are inconsistent with a smooth mass model as the fold pair images are about 15 times too faint. Variability, time delay effects, and reddening are ruled out through multiple-epoch imaging and color information. The system is marginally resolved in the radio in the Very Large Array Sky Survey S-band, where it has a 10 mJy detection. The radio flux ratios are compatible with the smooth mass macromodel. This system offers a unique tool for future studies of quasar structure with strong and microlensing. A more detailed analysis of follow-up with JWST/MIRI, VLT/MUSE, VLT/ERIS, and data from the European Very Long Baseline Interferometer will be presented in an upcoming paper., Comment: 5 pages, 3 figures, letter

Galaxy-scale gravitational lenses are often modeled with two-component mass profiles where one component represents the stellar mass and the second is an NFW profile representing the dark matter. Outside of the spherical case, the NFW profile is costly to implement, and so it is approximated via two different methods; ellipticity can be introduced via the lensing potential (NFWp) or via the mass by approximating the NFW profile as a sum of analytical profiles (NFWm). While the NFWp method has been the default for lensing applications, it gives a different prescription of the azimuthal structure, which we show introduces ubiquitous gradients in ellipticity and boxiness in the mass distribution rather than having a constant elliptical shape. Because unmodeled azimuthal structure has been shown to be able to bias lens model results, we explore the degree to which this introduced azimuthal structure can affect the model accuracy. We construct input profiles using composite models using both the NFWp and NFWm methods and fit these mocks with a power-law elliptical mass distribution (PEMD) model with external shear. As a measure of the accuracy of the recovered lensing potential, we calculate the value of the Hubble parameter $H_0$ one would determine from the lensing fit. We find that the fits to the NFWp input return $H_0$ values which are systematically biased by about $3\%$ lower than the NFWm counterparts. We explore whether such an effect is attributable to the mass sheet transformation (MST) by using an MST-independent quantity, $\xi_2$. We show that, as expected, the NFWm mocks are degenerate with PEMD through an MST. For the NFWp, an additional bias is found beyond the MST due to azimuthal structures {\it exterior to the Einstein radius}. We recommend modelers use an NFWm prescription in the future, such that azimuthal structure can be introduced explicitly rather than implicitly., Comment: 15 pages, 8 figures

We present the proof-of-concept of a method to find strongly lensed quasars using their spatially-extended photometric variability through difference imaging in cadenced imaging survey data. We apply the method to Pan-STARRS, starting with an initial selection of 14 107 Gaia multiplets with quasar-like infrared colours from WISE. We identify 229 candidates showing notable spatially-extended variability during the Pan-STARRS survey period. These include 20 known lenses, alongside an additional 12 promising candidates for which we obtain long-slit spectroscopy follow-up. This process results in the confirmation of four doubly lensed quasars, four unclassified quasar pairs and one projected quasar pair. Only three are pairs of stars or quasar+star projections, the false positive rate is thereby 25%. The lenses have separations between 0.81" and 1.24" and source redshifts between z = 1.47 and z = 2.46. Three of the unclassified quasar pairs are promising dual quasars candidates with separations ranging from 6.6 to 9.3 kpc. We expect that this technique will be a particularly efficient way to select lensed variables in the upcoming Rubin-LSST, which will be crucial given the expected limitations for spectroscopic follow-up, Comment: 11 pages, 7 figures

The tight correlations found between masses of supermassive black holes (SMBHs) and the luminosities, total stellar masses, and velocity dispersions of their host galaxies are often interpreted as a sign of their co-evolution. Studying these correlations across redshift provides a powerful insight into the evolutionary path followed by the quasar and its host galaxy. While the mass of the black hole is accessible from single-epoch spectra, measuring the mass of its host galaxy is challenging as the active nucleus largely overshines its host. Here, we present a technique to probe quasar-host relations beyond the local universe with strong gravitational lensing, hence overcoming the use of stellar population models or velocity dispersion measurements, both prone to degeneracies. We study in detail one of the three known cases of strong lensing by a quasar to accurately measure the mass of its host and to infer a total lensing mass of $\log_{10}(M_{\rm Tot, h}/M_{\odot}) = 10.27^{+0.06}_{-0.07}~$ within the Einstein radius of 1.2 kpc. The lensing measurement is more precise than any other alternative technique and compatible with the local $M_{BH}$-$M_{\star, h}$ scaling relation. The sample of such quasar-galaxy or quasar-quasar lensing systems should reach a few hundreds with Euclid and Rubin-LSST, thus enabling the application of such a method with statistically significant sample sizes., Comment: Published in Nature Astronomy, 15 pages, 6 figures

The spatial resolution of astronomical images is limited by atmospheric turbulence and diffraction in the telescope optics, resulting in blurred images. This makes it difficult to accurately measure the brightness of blended objects because the contributions from adjacent objects are mixed in a time-variable manner due to changes in the atmospheric conditions. However, this effect can be corrected by characterizing the Point Spread Function (PSF), which describes how a point source is blurred on a detector. This function can be estimated from the stars in the field of view, which provides a natural sampling of the PSF across the entire field of view. Once the PSF is estimated, it can be removed from the data through the so-called deconvolution process, leading to images of improved spatial resolution. The deconvolution operation is an ill-posed inverse problem due to noise and pixelization of the data. To solve this problem, regularization is necessary to guarantee the robustness of the solution. Regularization can take the form of a sparse prior, meaning that the recovered solution can be represented with only a few basis eigenvectors. STARRED is a Python package developed in the context of the COSMOGRAIL collaboration and applies to a vast variety of astronomical problems. It proposes to use an isotropic wavelet basis, called Starlets, to regularize the solution of the deconvolution problem. This family of wavelets has been shown to be well-suited to represent astronomical objects. STARRED provides two modules to first reconstruct the PSF, and then perform the deconvolution. It is based on two key concepts: i) the image is reconstructed in two separate channels, one for the point sources and one for the extended sources, and ii) the code relies on the deliberate choice of not completely removing the effect of the PSF, but rather bringing the image to a higher resolution.

The microlensing signal in the light curves of gravitationally lensed quasars can shed light on the dark matter (DM) composition in their lensing galaxies. Here, we investigate a sample of six lensed quasars from the most recent and best COSMOGRAIL observations: HE~1104$-$1805, HE~0435$-$1223, RX~J1131$-$1231, WFI~2033$-$4723, PG~1115$+$080, and J1206$+$4332, yielding a total of eight microlensing light curves, when combining independent image pairs and typically spanning ten years. We explore the microlensing signals to determine whether the standard assumptions on the stellar populations are sufficient to account for the amplitudes of the measured signals. We use the most detailed lens models to date from the H0LiCOW/TDCOSMO collaboration to generate simulated microlensing light curves. Finally, we propose a methodology based on the Kolmogorov-Smirnov test to verify whether the observed microlensing amplitudes in our data are compatible with the most standard scenario, whereby galaxies are composed of stars as compact bodies and smoothly distributed DM. Given our current sample, we show that the standard scenario cannot be rejected, in contrast with previous results by Hawkins (2020a), claiming that a population of stellar mass primordial black holes (PBHs) is necessary to explain the amplitude of the microlensing signals in lensed quasar light curves. We further estimate the number of microlensing light curves needed to distinguish between the standard scenario with stellar microlensing and a scenario that describes all the DM contained in galaxies in the form of compact objects such as PBHs, with a mean mass of $0.2M_{\odot}$. We find that about 900 microlensing curves from the Rubin Observatory will be sufficient to discriminate between the two extreme scenarios at a 95\% confidence level.

We investigate the ability of human 'expert' classifiers to identify strong gravitational lens candidates in Dark Energy Survey like imaging. We recruited a total of 55 people that completed more than 25$\%$ of the project. During the classification task, we present to the participants 1489 images. The sample contains a variety of data including lens simulations, real lenses, non-lens examples, and unlabeled data. We find that experts are extremely good at finding bright, well-resolved Einstein rings, whilst arcs with $g$-band signal-to-noise less than $\sim$25 or Einstein radii less than $\sim$1.2 times the seeing are rarely recovered. Very few non-lenses are scored highly. There is substantial variation in the performance of individual classifiers, but they do not appear to depend on the classifier's experience, confidence or academic position. These variations can be mitigated with a team of 6 or more independent classifiers. Our results give confidence that humans are a reliable pruning step for lens candidates, providing pure and quantifiably complete samples for follow-up studies., Comment: 16 pages, 20 Figures

Strong-lensing time delays enable measurement of the Hubble constant ($H_{0}$) independently of other traditional methods. The main limitation to the precision of time-delay cosmography is mass-sheet degeneracy (MSD). Some of the previous TDCOSMO analyses broke the MSD by making standard assumptions about the mass density profile of the lens galaxy, reaching 2% precision from seven lenses. However, this approach could potentially bias the $H_0$ measurement or underestimate the errors. For this work, we broke the MSD for the first time using spatially resolved kinematics of the lens galaxy in RXJ1131$-$1231 obtained from the Keck Cosmic Web Imager spectroscopy, in combination with previously published time delay and lens models derived from Hubble Space Telescope imaging. This approach allowed us to robustly estimate $H_0$, effectively implementing a maximally flexible mass model. Following a blind analysis, we estimated the angular diameter distance to the lens galaxy $D_{\rm d} = 865_{-81}^{+85}$ Mpc and the time-delay distance $D_{\Delta t} = 2180_{-271}^{+472}$ Mpc, giving $H_0 = 77.1_{-7.1}^{+7.3}$ km s$^{-1}$ Mpc$^{-1}$ - for a flat $\Lambda$ cold dark matter cosmology. The error budget accounts for all uncertainties, including the MSD inherent to the lens mass profile and the line-of-sight effects, and those related to the mass-anisotropy degeneracy and projection effects. Our new measurement is in excellent agreement with those obtained in the past using standard simply parametrized mass profiles for this single system ($H_0 = 78.3^{+3.4}_{-3.3}$ km s$^{-1}$ Mpc$^{-1}$) and for seven lenses ($H_0 = 74.2_{-1.6}^{+1.6}$ km s$^{-1}$ Mpc$^{-1}$), or for seven lenses using single-aperture kinematics and the same maximally flexible models used by us ($H_0 = 73.3^{+5.8}_{-5.8}$ km s$^{-1}$ Mpc$^{-1}$). This agreement corroborates the methodology of time-delay cosmography., Comment: 21 pages, 22 figures, 1 table. Accepted by A&A (this version: language improvements only)

With the onset of large-scale astronomical surveys capturing millions of images, there is an increasing need to develop fast and accurate deconvolution algorithms that generalize well to different images. A powerful and accessible deconvolution method would allow for the reconstruction of a cleaner estimation of the sky. The deconvolved images would be helpful to perform photometric measurements to help make progress in the fields of galaxy formation and evolution. We propose a new deconvolution method based on the Learnlet transform. Eventually, we investigate and compare the performance of different Unet architectures and Learnlet for image deconvolution in the astrophysical domain by following a two-step approach: a Tikhonov deconvolution with a closed-form solution, followed by post-processing with a neural network. To generate our training dataset, we extract HST cutouts from the CANDELS survey in the F606W filter (V-band) and corrupt these images to simulate their blurred-noisy versions. Our numerical results based on these simulations show a detailed comparison between the considered methods for different noise levels., Comment: 15 pages, 5 figures

The largest source of systematic errors in the time-delay cosmography method likely arises from the lens model mass distribution, where an inaccurate choice of model could in principle bias the value of $H_0$. A Bayesian hierarchical framework has been proposed which combines lens systems with kinematic data, constraining the mass profile shape at a population level. The framework has been previously validated on a small sample of lensing galaxies drawn from hydro-simulations. The goal of this work is to expand the validation to a more general set of lenses consistent with observed systems, as well as confirm the capacity of the method to combine two lens populations: one which has time delay information and one which lacks time delays and has systematically different image radii. For this purpose, we generate samples of analytic lens mass distributions made of baryons+dark matter and fit the subsequent mock images with standard power-law models. Corresponding kinematics data are also emulated. The hierarchical framework applied to an ensemble of time-delay lenses allows us to correct the $H_0$ bias associated with model choice, finding $H_0$ within $1.5\sigma$ of the fiducial value. We then combine this set with a sample of corresponding lens systems which have no time delays and have a source at lower $z$, resulting in a systematically smaller image radius relative to their effective radius. The hierarchical framework successfully accounts for this effect, recovering a value of $H_0$ which is both more precise ($\sigma\sim2\%$) and more accurate ($0.7\%$ median offset) than the time-delay set alone. This result confirms that non-time-delay lenses can nonetheless contribute valuable constraining power to the determination of $H_0$ via their kinematic constraints, assuming they come from the same global population as the time-delay set., Comment: 18 pages, 12 figures, 1 table, accepted for publication in A&A

Modeling the mass distribution of galaxy-scale strong gravitational lenses is a task of increasing difficulty. The high-resolution and depth of imaging data now available render simple analytical forms ineffective at capturing lens structures spanning a large range in spatial scale, mass scale, and morphology. In this work, we address the problem with a novel multiscale method based on wavelets. We tested our method on simulated Hubble Space Telescope (HST) imaging data of strong lenses containing the following different types of mass substructures making them deviate from smooth models: (1) a localized small dark matter subhalo, (2) a Gaussian random field (GRF) that mimics a nonlocalized population of subhalos along the line of sight, and (3) galaxy-scale multipoles that break elliptical symmetry. We show that wavelets are able to recover all of these structures accurately. This is made technically possible by using gradient-informed optimization based on automatic differentiation over thousands of parameters, which also allow us to sample the posterior distributions of all model parameters simultaneously. By construction, our method merges the two main modeling paradigms - analytical and pixelated - with machine-learning optimization techniques into a single modular framework. It is also well-suited for the fast modeling of large samples of lenses. All methods presented here are publicly available in our new Herculens package., Comment: 24 pages, 12 figures, accepted for publication in A&A

Future deep HI surveys will be essential for understanding the nature of galaxies and the content of the Universe. However, the large volume of these data will require distributed and automated processing techniques. We introduce LiSA, a set of python modules for the denoising, detection and characterization of HI sources in 3D spectral data. LiSA was developed and tested on the Square Kilometer Array Science Data Challenge 2 dataset, and contains modules and pipelines for easy domain decomposition and parallel execution. LiSA contains algorithms for 2D-1D wavelet denoising using the starlet transform and flexible source finding using null-hypothesis testing. These algorithms are lightweight and portable, needing only a few user-defined parameters reflecting the resolution of the data. LiSA also includes two convolutional neural networks developed to analyse data cubes which separate HI sources from artifacts and predict the HI source properties. All of these components are designed to be as modular as possible, allowing users to mix and match different components to create their ideal pipeline. We demonstrate the performance of the different components of LiSA on the SDC2 dataset, which is able to find 95% of HI sources with SNR > 3 and accurately predict their properties., Comment: 18 pages, 16 figures

This invited Snowmass 2021 White Paper highlights the power of joint-analysis of astronomical transients in advancing HEP Science and presents research activities that can realize the opportunities that come with current and upcoming projects. Transients of interest include gravitational wave events, neutrino events, strongly-lensed quasars and supernovae, and Type~Ia supernovae specifically. These transients can serve as probes of cosmological distances in the Universe and as cosmic laboratories of extreme strong-gravity, high-energy physics. Joint analysis refers to work that requires significant coordination from multiple experiments or facilities so encompasses Multi-Messenger Astronomy and optical transient discovery and distributed follow-up programs., Comment: Minor updates to align with the feedback from the Snowmass Community Summer Study Workshop

This report is the result of a joint discussion between the Rubin and Euclid scientific communities. The work presented in this report was focused on designing and recommending an initial set of Derived Data products (DDPs) that could realize the science goals enabled by joint processing. All interested Rubin and Euclid data rights holders were invited to contribute via an online discussion forum and a series of virtual meetings. Strong interest in enhancing science with joint DDPs emerged from across a wide range of astrophysical domains: Solar System, the Galaxy, the Local Volume, from the nearby to the primaeval Universe, and cosmology., Comment: Report of the Rubin-Euclid Derived Data Products Working Group, 78 pages, 11 figures

We present the Strong Lensing Science Collaboration's (SLSC) recommended observing targets for the science verification and science validation phases of commissioning. Our recommendations have been developed in collaboration with the Dark Energy Science Collaboration (DESC) Strong Lensing Topical Team. In summary, our key recommendations are as follows: (1) Prioritize fields that span the full range of declination observable from Cerro Pachon during the engineering focused Science Verification phase of commissioning, before concentrating on equatorial fields for the Science Validation surveys. (2) Observe quadruply lensed quasars as the ultimate test of the Active Optics system towards the end of the Science Verification phase of commissioning. These systems are the strongest tests known for delivered image quality. (3) Prioritize science validation survey fields (both single deep pointings and wide fields) that have been searched thoroughly by precursor surveys for strong lenses. (4) The optimal wide (~100 degree^2) science validation field would include the CFHT-LS W4 field, and overlap with the SDSS Stripe 82, DES-SN, KIDS and HSC-SSP fields. (5) The optimal single pointing science validation fields are the XMM-LSS and COSMOS Deep Drilling Fields, the equatorial Hubble Frontier Fields galaxy clusters, and strongly lensed quasars with measured time delays that are well-matched to commissioning timescales., Comment: 8 pages, 1 figure

Sky survey telescopes and powerful targeted telescopes play complementary roles in astronomy. In order to investigate the nature and characteristics of the motions of very faint objects, a flexibly-pointed instrument capable of high astrometric accuracy is an ideal complement to current astrometric surveys and a unique tool for precision astrophysics. Such a space-based mission will push the frontier of precision astrometry from evidence of Earth-mass habitable worlds around the nearest stars, to distant Milky Way objects, and out to the Local Group of galaxies. As we enter the era of the James Webb Space Telescope and the new ground-based, adaptive-optics-enabled giant telescopes, by obtaining these high precision measurements on key objects that Gaia could not reach, a mission that focuses on high precision astrometry science can consolidate our theoretical understanding of the local Universe, enable extrapolation of physical processes to remote redshifts, and derive a much more consistent picture of cosmological evolution and the likely fate of our cosmos. Already several missions have been proposed to address the science case of faint objects in motion using high precision astrometry missions: NEAT proposed for the ESA M3 opportunity, micro-NEAT for the S1 opportunity, and Theia for the M4 and M5 opportunities. Additional new mission configurations adapted with technological innovations could be envisioned to pursue accurate measurements of these extremely small motions. The goal of this White Paper is to address the fundamental science questions that are at stake when we focus on the motions of faint sky objects and to briefly review instrumentation and mission profiles., Comment: arXiv admin note: substantial text overlap with arXiv:1910.08028, arXiv:1707.01348