Search

This study presents a novel one-pot procedure for preparing sub-10 μm poly(ethylene glycol) (MPEG)-stabilized glycol-modified poly(ethylene terephthalate), poly(ethylene terephthalate) (PET), poly(lactic acid) (PLA), polycarbonate, and polycaprolactone (PCL) particles from commercial plastics. The prepared particles can be dried and directly resuspended in water, making them easy to handle and relevant mimics of microplastics. In addition, the method was extended to the preparation of unstabilized PET particles and somewhat larger polyethylene (PE)-based particles. Selected stabilized microparticles were subjected to aerobic biodegradation studies and compared with nonstabilized PET particles. All of the particles exhibited some degradation. For PLA and PET particles, the degradation corresponded well to the amount of surface-stabilizing MPEG groups or known impurities, confirming that these polymers do not degrade under the applied conditions but that the stabilizing groups do. PCL particles degraded relatively rapidly, which is consistent with the literature data and their relatively small size. PE-based particles degraded more than expected if only degradation of the stabilizing groups was taken into account, indicating that the surface chemistry of these particles plays a role in bulk degradation.

Recycled PMMA was prepared by directly polymerizing crude pyrolysis oils from lab-scale pyrolysis of collected industrial waste PMMA. The pyrolysis oils consisted mainly of methyl methacrylate (MMA, >85%), while the type and number of by-products from the thermal process were assigned through GC-MS analysis showing a clear correlation to the pyrolysis temperature. By-products can be removed by distillation; however, directly employing the crude oils to prepare PMMA through solution, suspension, emulsion, or casting polymerization was investigated to assess the potential for omitting this costly step. It was found that the crude pyrolysis oils could be polymerized efficiently via solution, emulsion, and casting polymerization to produce a polymer similar to the PMMA prepared from a pristine monomer. The impurities in the PMMAs prepared from the crude mixtures were investigated by extraction analyses followed by screening by GC-MS. In the case of casting polymerization, the GC-MS analysis, as expected, revealed various residual by-products, while solution and emulsion polymerization showed only very few impurities, mainly originating from the polymerization and not the feed material. Additional purification of the crude pyrolysis oils would be required for applications in casting polymerization. In contrast, direct polymerization by emulsion or solution polymerization is considered applicable for producing pristine PMMA from crude waste PMMA pyrolysis oil., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

In the green transition, actuators and generators play an essential role in the development of sustainable solutions across a broad range of applications. In this context, dielectric transducers are advocated as one of the most promising solutions in terms of effectiveness, lifetime and running costs. However, they are classically produced as sandwich structures, whereby a cross-linked dielectric material is placed between two compliant electrodes. From a materials consumption viewpoint, this is problematic, since it will inherently result in a loss of material during production as well as inhibit the recycling of expended systems when their life comes to an end. Herein, we present a cleaning method employing surfactants and sonication to remove electrodes from the surface of the dielectric material. By applying a thermoplastic silicone elastomer as the dielectric material, it is possible to reprocess the material by hot-pressing, and to prepare new actuators after the rinsing process. This effectively shows that recycling production scrap, for example, is possible. By comparing the cleaned material with a directly recycled material, it is clear that cleaning removes a critical amount of metals from the material and enables recycling for at least five cycles. Comparatively, a directly recycled material is prone to a high leakage current and premature electronic breakdown after only two cycles. This simple cleaning process, in combination with use of a thermoplastic dielectric material, enables less waste from production as well as the possibility of reclaiming and recycling materials in general., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)