Search

Haptic organs are common in nature and help animals to navigate environments where vision is not possible. Insects often use slender, lightweight, and flexible links as sensing antennae. These antennae have a muscle-endowed base that changes their orientation and an organ that senses the applied force and moment, enabling active sensing. Sensing antennae detect obstacles through contact during motion and even recognize objects. They can also push obstacles. In all these tasks, force control of the antenna is crucial. The objective of our research is to develop a haptic robotic system based on a sensing antenna, consisting of a very lightweight and slender flexible rod. In this context, the work presented here focuses on the force control of this device. To achieve this, (a) we develop a dynamic model of the antenna that moves under gravity and maintains point contact with an object, based on lumped-mass discretization of the rod; (b) we prove the robust stability property of the closed-loop system using the Routh stability criterion; and (c) based on this property, we design a robust force control system that performs efficiently regardless of the contact point with the object. We built a mechanical device replicating this sensing organ. It is a flexible link connected at one end to a 3D force–torque sensor, which is attached to a mechanical structure with two DC motors, providing azimuthal and elevation movements to the antenna. Our experiments in contact situations demonstrate the effectiveness of our control method. [ABSTRACT FROM AUTHOR]

Large lightweight slender links mounted on mobile robots enlarge their workspace. This work presents one of these robots that has been endowed with 4 legs to improve its static stability—which is put at risk by the large link—and help in the positioning of the link. The efficiency of this system depends on its accuracy in positioning and orientating the end-effector placed at the tip of the link, which is compromised by vibrations that appear in the link during the movement and permanent deflections caused by gravity. A relatively simple control scheme that combines a feedback control of the pose of the mobile platform with a feedforward term that orientates the link is proposed. It uses three legs as actuators; and feeds back measurements of the extensions of the three legs and the orientation of the platform given by an inertial sensor placed in the upper part of the mobile platform. Based on the flatness property of a simplified dynamic model of the link, its dynamics can be easily inverted, being used to implement the proposed feedforward term. Since such feedforward term is used, extra sensors to measure the deflection of the link are not needed, and since the legs are used to move the link, extra actuators mounted on the link are neither needed. All this allows us to reduce the weight and the volume of the payload carried by the mobile platform. Results obtained through a finite elements software and experimentation of the real prototype show the good performance attained with the proposed control strategy. [ABSTRACT FROM AUTHOR]

This work addresses the robust control of processes of the form G (s) = K · e − τ · s / (1 + T · s λ) with 1 < λ ≤ 2 . A new method for tuning fractional-order P I and P D controllers is developed. The stability is assessed based on the frequency domain tuning of the regulators to control such delayed fractional-order underdamped processes. In order to analyze the closed-loop stability and robustness, the new concept of Robust High-Frequency Condition is introduced. The analysis based on that demonstrates that each controller has a different region of feasible frequency specifications, and, in all cases, they depend on their fractional integral or derivative actions. Finally, an application example, the position control of a teleoperated manipulator with a flexible link, is presented. Simulations and experiments illustrate that the region of feasible frequency specifications defined at low and high frequencies allows us to obtain robust controllers that fulfill frequency requirements. [ABSTRACT FROM AUTHOR]

Model design and motion control are considered the cornerstones of the robotic field that allow for achieving performance tasks. This article proposes a new dynamic modeling and control approach for very lightweight mechanical systems carrying payloads. The selection of the model and the design of the control are elaborated on using a fractional order framework under different conditions. The use of fractional order calculus is justified by the better performance that reveals a fractional order model compared to an integer order model of similar complexity. The mechanical structure of very lightweight manipulators has vibrations that impede the accurate positioning of their end effector. Moreover, they have actuators with high friction and sensors to measure the vibrations, which often are strain gauges, that have offset and high-frequency noise. All these mentioned problems might degrade the mechanical system's performance. Hence, to overcome these inconveniences, two nested-loop controls are examined: an inner loop that controls the motor dynamics and removes the friction effects and an outer loop implemented to eliminate the beam vibrations by adapting the input-state feedback linearization technique. Then, we propose a new fractional order control scheme that (1) removes the strain gauge offset disturbances, (2) reduces the risk of the actuator's saturation caused by the high-frequency noise of strain gauges and (3) reduces the dynamic effects of huge payload changes. We prove that our fractional controller has enhanced robustness with respect to the above-mentioned problems. Finally, the investigated approach is validated experimentally by applying it to a lightweight robot mounted on an air table. [ABSTRACT FROM AUTHOR]

Accurate trajectory tracking is a paramount objective when a mobile robot must perform complicated tasks. In high-speed movements, time delays appear when reaching the desired position and orientation, as well as overshoots in the changes of orientation, which prevent the execution of some tasks. One of the aspects that most influences the tracking performance is the control system of the actuators of the robot wheels. It usually implements PID controllers that, in the case of low-cost robots, do not yield a good tracking performance owing to friction nonlinearity, hardware time delay and saturation. We propose to overcome these problems by designing an advanced process control system composed of a PID controller plus a prefilter combined with a Smith predictor, an anti-windup scheme and a Coulomb friction compensator. The contribution of this article is the motor control scheme and the method to tune the parameters of the controllers. It has been implemented in a well-known low-cost small mobile robot and experiments have been carried out that demonstrate the improvement achieved in the performance by using this control system. [ABSTRACT FROM AUTHOR]

Conventionally, the parameters of a fuzzy logic controller (FLC) are obtained by a trial and error method or by human experience. In this paper, the problem of designing a FLC for maximum power point tracking (MPPT) of a photovoltaic system (PV) that consists of a PV generator, a DC-DC boost converter and a lead-acid battery is studied. The normalization gains, the membership functions and the fuzzy rules are automatically adjusted using a particles swarm optimization algorithm (PSO) in order to maximize the criterion based on the integration of the PV module power under standard temperature condition (STC) (T=25°C and S=1000 W/m²). The robustness test of the optimized fuzzy logic MPPT controller (FLC-MPPT) is carried out under different scenarios. Simulation results of the system clearly show that the proposed optimized FLCMPPT controller outperforms in terms of maximum efficiency the FLC-MPPT controller not optimized, the FLC-MPPT controller with optimized normalization gains and the FLC-MPPT controller with optimized normalization gains and membership functions. [ABSTRACT FROM AUTHOR]

Copyright of Informador Técnico is the property of Servicio Nacional de Aprendizaje SENA and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)