Search

The expanding and ubiquitous availability of the Internet of Things (IoT) have changed everyone's life easier and more convenient. Same time it also offers a number of issues, such as effectiveness, security, and excessive power consumption, which constitute a danger to intelligent IoT-based apps. Group managing is primarily used for transmitting and multi-pathing communications that are secured with a general group key and it can only be decrypted by an authorized group member. A centralized trustworthy system, which is in charge of key distribution and upgrades, is used to maintain group keys. To provide longitudinal access controls, Software Defined Network (SDN) based security controllers are employed for group administration services. Cloud service providers provide a variety of security features. There are just a few software security answers available. In the proposed system, a hybrid protocols were used in SDN and it embeds edge system to improve the security in the group communication. Tree-based algorithms compared with Group Key Establishment (GKE) and Multivariate public key cryptosystem with Broadcast Encryption in the proposed system. When all factors are considered, Broadcast Encryption (BE) appears to become the most logical solution to the issue. BE enables an initiator to send encrypted messages to a large set of recipients in a efficient and productive way, meanwhile assuring that the data can only be decrypted by defining characteristic. The proposed method improves the security, efficiency of the system and reduces the power consumption and minimizes the cost. [ABSTRACT FROM AUTHOR]

With the increasing use of portable devices, whenever information is sent through broadcasting channel, security re-lated challenges may occur so that the attackers can listen the information shared in the broadcasting channels such as Radio, TV and Wireless Adhoc Networks (WAN). To prevent such attacks, many cyber security-based algo-rithms are developed to enhance the security between the transmitter and receivers, but still the privacy attacks like man-in-the-middle attack, brute force attack etc occur. In this paper a technology called cross layer authentication is proposed where it uses the third party called server to authenticate between transmitter and receiver. The cross-layer authentication generates a group key by using the users (subscribers) identity information and channel (publisher) information and broadcasts the information to channels and users. The group key will continuously update and broadcasts the information to all the users in the channel whenever a user is added or deleted. Since the group key changes frequently, it will be quite challenging for the attackers to track the shared information. Hence, the proposed method avoids the attacks between transmitter and receiver by generating a group key using ECDSA algorithm and the information is encrypted by AES-128 bit. [ABSTRACT FROM AUTHOR]

Internet of Things (IoT) is a network that can communicate between devices without human intervention. In this network, IoT devices collect sensor data and provide them for various applications. However, data collected from the device may include sensitive information. If this information is leaked, several serious problems will occur. Therefore, access control is presented to allow only authorized users to access important data. This paper proposes a model for organizing and managing groups with the group key (GK) so that only the authorized users can share data for access control. In particular, rekeying overhead is reduced. Because the IoT devices are resource-constrained, the network lifetime may be reduced as the rekeying overhead increases. There is a problem when group communication between multiple users is not used. If multiple users can easily access all data, the leakage of sensitive information will increase. To solve this problem, only users who need to share data join in a group based on the hyperledger fabric. Our approach groups users with the same GK and protects sensitive data by using secure communication links within the group. In addition, a trusted agent for rekeying sends a new GK to users in the group. Therefore, the security of data is guaranteed, and the network lifetime is extended. We analyze the storage cost, delay, and processing time for rekeying, and we also compare them according to the number of users and the depth of the key tree. The results of the performance analysis show that the proposed hyperledger fabric-based lightweight group management (H-LGM) outperforms the existing method in terms of storage cost, delay, and processing time.

In this modern era of smart cities supported by digital locker facilities, e‐governance, e‐healthcare, e‐banking, e‐learning systems, and other digital systems, People use mobile phones to upload and share sensitive documents with others. Previous group key management schemes suffer from problems such as expensive double encryptions, the need for re‐encryption during every user leave operation and becoming vulnerable to attacks. Hence, to address these three issues, this manuscript introduces a pairing based cryptography based computationally efficient protocol powered by polynomial equations. First, to reduce computational overhead during group communication, the document is encrypted only once with minimal complexity before uploaded to cloud. Second, during a user leave or join operation, the re‐encryption of documents in cloud is avoided in the group manager side by tactically relieving the group key parameters from the polynomial parameters. Finally, the security analysis shows that the careful handling of secure parameters of users averts the collusion attack, man‐in‐the‐middle attack, message modification attacks, and all other possible attacks. The implementation results portray the capacity of this work to handle secure group communications in cloud storage. [ABSTRACT FROM AUTHOR]

In smart grids, the access verification of a large number of intelligent gateways and terminal devices has become one of the main concerns to ensure system security. This means that smart grids need a new key management method that is safe and efficient and has a low computational cost. Although a large number of scholars have conducted relevant research, most of these schemes cannot balance the computational overhead and security. Therefore, we propose a lightweight and secure key management method, having a low computational overhead, based on blockchain for smart grids. Firstly, we redesigned the architecture of the smart grid based on blockchain and completed the division of various entities. Furthermore, we designed a pairing-free certification authenticated group key agreement method based on blockchain under the architecture. Finally, we achieved higher security attributes, and lower authentication delay and computational overhead, compared to the traditional schemes, as shown in performance analysis and comparison. [ABSTRACT FROM AUTHOR]

Use of Internet-of-Things (IoT)-based wireless applications has been exponentially increased nowadays and likely to accelerate in near future. Thus, a large volume of traffic needs to be managed at the application server. In such scenario, the traditional single-server architecture shows serious performance bottleneck and needs to be replaced by multiple servers. In addition, several security and design vulnerabilities may arise while accessing application data through various resource-constraint mobile devices. Thus, ensuring entity authentication, application data confidentiality and energy-efficient computations are essential. In this article, we introduce a group key-based lightweight Mutual Authentication and Key Agreement (MAKA) protocol for multi-server environment. The proposed protocol is designed using low-cost cryptographic primitives (such as hash function and symmetric key encryption/decryption) to address energy-efficiency requirements of the resource-constraint mobile devices. It reduces computational burden of the registration center by distributing the traffic load into a group of servers. Additionally, registration center needs not to maintain one-to-one communication with its users whenever a new server is added to the system. The protocol achieves various security and design properties which are verified both formally and informally. Finally, we compare our protocol with others to show its applicability in real-life implementations. [ABSTRACT FROM AUTHOR]

In any multi-device / party systems supporting GRID and cloud-based applications, an essential constraint of these systems is the need of all tools and participants to interconnect with each other as members of a group in a secure approach. Group key management method is an essential functional element for any protected distributed communication setting. Key distribution method is a crucial factor in securing communication in grid computing. After the secure key management is executed, messages will be able to be securely exchanged between the grid units. A number of protocols have been proposed to maintain secure group key management. In this paper we present a new password base protocol for secure group key management in Grid computing environment, which is organized in two dynamic servicing layers: the grid application that needs grid services, and the grid services that act on behalf of the user. [ABSTRACT FROM AUTHOR]

In smart grids, the access verification of a large number of intelligent gateways and terminal devices has become one of the main concerns to ensure system security. This means that smart grids need a new key management method that is safe and efficient and has a low computational cost. Although a large number of scholars have conducted relevant research, most of these schemes cannot balance the computational overhead and security. Therefore, we propose a lightweight and secure key management method, having a low computational overhead, based on blockchain for smart grids. Firstly, we redesigned the architecture of the smart grid based on blockchain and completed the division of various entities. Furthermore, we designed a pairing-free certification authenticated group key agreement method based on blockchain under the architecture. Finally, we achieved higher security attributes, and lower authentication delay and computational overhead, compared to the traditional schemes, as shown in performance analysis and comparison.

This paper proposes a fog-based secure data sharing framework for IoT devices that uses blockchain mechanism for this purpose. Fog computation is a popular paradigm that facilitates computation/storage facilities closer to the users and placed in between cloud environment and the users. Here, the IoT devices share data among each other through a secure mechanism. We propose two software agents: Software agent for Network formation and Monitoring (SAN) and Software agent for Blockchain formation and monitoring (SAB) placed in the fog node where SAN forms/monitors the network of IoT devices and SAB implements the security framework for blockchain implementation. Here, three different versions of AES (128/192/256) are used for group key sharing. Group key is used for encryption/decryption of the data present in a block of a blockchain. An AES 128 based Proof of Work (PoW) is used for block addition by an authorized IoT device. SHA 256 is used for implementing hashing in blockchain. Three different systems namely System 1, 2, and 3 are considered for the experiment under different settings of design parameters. A comparison between different settings is depicted in the result section. The execution time (in seconds) is used as an evaluation parameter. The performance is found to be best in case of System 3 configuration. The time requirement is found to be a monotonically increasing function of block size and AES key length. [ABSTRACT FROM AUTHOR]