Search

Identification of different species of animals has become an important issue in biology and ecology. Ornithology has made alliances with other disciplines in order to establish a set of methods that play an important role in the birds’ protection and the evaluation of the environmental quality of different ecosystems. In this case, the use of machine learning and deep learning techniques has produced big progress in birdsong identification. To make an approach from AI-IoT, we have used different approaches based on image feature comparison (through CNNs trained with Imagenet weights, such as EfficientNet or MobileNet) using the feature spectrogram for the birdsong, but also the use of the deep CNN (DCNN) has shown good performance for birdsong classification for reduction of the model size. A 5G IoT-based system for raw audio gathering has been developed, and different CNNs have been tested for bird identification from audio recordings. This comparison shows that Imagenet-weighted CNN shows a relatively high performance for most species, achieving 75% accuracy. However, this network contains a large number of parameters, leading to a less energy efficient inference. We have designed two DCNNs to reduce the amount of parameters, to keep the accuracy at a certain level, and to allow their integration into a small board computer (SBC) or a microcontroller unit (MCU).

5G communications allow the integration of different wireless technologies to exploit the added value of multihoming scenarios. Furthermore, in connection with the Internet of Things (IoT), multi-homed nodes are very interesting, since it allows one to address new challenges and adapt the usage of communication technologies to new requirements imposed by the location of each deployment, the available energy resources on each node, and the IoT application itself. There are available commercial wireless nodes that embed and handle multiple interfaces. Terms such as seamless and transparent communications as well as technology integration fit well within the 5G standards. However, in practice, these wireless nodes are basically relayed in one of these wireless technologies when connected, and in the case of using other interfaces, their usage is not coordinated. In this context, we propose and implement a novel and efficient heterogeneous interface selection algorithm for multihoming and integrative communications using commercial products by performing local decisions on a per-packet basis, analysing different issues and approaches from a practical point of view, both hardware and software. We compare our proposal with other alternatives, highlighting the opportunities by exploiting these multihoming features in 5G-enabled IoT nodes.

Abstract Urban parks constitute one of the main leisure areas, especially for the most vulnerable people in our society, children, and the elderly. Contact with soils can pose a health risk. Microbiological testing is a key aspect in determining whether they are suitable for public use. The aim of this work is to map the spatial distribution of potential dangerous Enterobacteria but also bioremediation useful (lipase producers) isolates from soils in an urban park in the area of Valencia (Spain). To this end, our team has collected 25 samples of soil and isolated 500 microorganisms, using a mobile application to collect information of the soil samples (i.e. soil features, temperature, humidity, etc.) with geolocation. A combined protocol including matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) and 16S rDNA sequencing PCR has been established to characterize the isolates. The results have been processed using spatial statistical techniques (using Kriging method), taking into account the number of isolated strains, also proving the reactivity against standard pathogenic bacterial strains (Escherichia coli, Bacillus cereus, Salmonella, Pseudomonas and Staphylococcus aureus), and have increased the number of samples (to 896 samples) by interpolating spatially each parameter with this statistical method. The combined use of methods from biology and computer science allows the quality of the soil in urban parks to be predicted in an agile way, which can generate confidence in its use by citizens.

Digital twins are essential in Agriculture 5.0, providing an accurate digital representation of agricultural objects and processes, enabling data-driven decision-making, the simulation of future scenarios, and innovation for a more efficient and sustainable agriculture. The main objective of this article is to review and compare the main tools for the development of digital twins for Agriculture 5.0 applications using 3D point cloud models created from photogrammetry techniques. For this purpose, the most commonly used tools for the development of these 3D models are presented. As a methodological approach, a qualitative comparison of the main characteristics of these tools was carried out. Then, based on some images taken in an orange grove, a quality analysis of the 3D point cloud models obtained by each of the analyzed tools was carried out. We also obtained a synthetic quality index in order to have a way to categorize the different pieces of software. Finally, as a conclusion, we compared the performance of the different software tools and the point clouds obtained by considering objective metrics (from the 3D quality assessment) and qualitative metrics in the synthetic quality index. With this index, we found that OpenDroneMap was the best software in terms of quality-cost ratio. Also, the paper introduces the concept of Agriculture 6.0, exploring the integration of advancements from Agriculture 5.0 to envision the potential evolution of agricultural practices and technologies, considering their impact on social and economic aspects.

The proliferation and great variety of low-cost air quality (AQ) sensors, combined with their flexibility and energy efficiency, gives an opportunity to integrate them into Wireless Sensor Networks (WSN). However, with these sensors, AQ monitoring poses a significant challenge, as the data collection and analysis process is complex and prone to errors. Although these sensors do not meet the performance requirements for reference regulatory-equivalent monitoring, they can provide informative measurements and more if we can adjust and add further processing to their raw measurements. Therefore, the integration of these sensors aims to facilitate real-time monitoring and achieve a higher spatial and temporal sampling density, particularly in urban areas, where there is a strong interest in providing AQ surveillance services since there is an increase in respiratory/allergic issues among the population. Leveraging a network of low-cost sensors, supported by 5G communications in combination with Artificial Intelligence (AI) techniques (using Convolutional and Deep Neural Networks (CNN and DNN)) to predict 24-h-ahead readings is the goal of this article in order to be able to provide early warnings to the populations of hazards areas. We have evaluated four different neural network architectures: Multi-Linear prediction (with a dense Multi-Linear Neural Network (NN)), Multi-Dense network prediction, Multi-Convolutional network prediction, and Multi-Long Short-Term Memory (LSTM) network prediction. To perform the training of the prediction of the readings, we have prepared a significant dataset that is analyzed and processed for training and testing, achieving an estimation error for most of the predicted parameters of around 7.2% on average, with the best option being the Multi-LSTM network in the forthcoming 24 h. It is worth mentioning that some pollutants achieved lower estimation errors, such as CO2 with 0.1%, PM10 with 2.4% (as well as PM2.5 and PM1.0), and NO2 with 6.7%.

There is clear evidence of the effects of air pollution on health. In this paper, we present an innovative application designed to assess Air Quality (AQ) exposure based on the World Health Organization’s AQ Guidelines, analysing pollutants and their concentrations independently. Our aim is to provide this information to citizens based on their health profile (medical history or requirements) before and during outdoor trips of their choice, both walking and cycling, empowering them to proactively make informed personal decisions about their route choices and identifying potentially unhealthy travel environments. For this purpose, we have access to official data from AQ monitoring stations that are updated periodically every 10 min. Then, by using spatial interpolation techniques (with Ordinary Kriging), we estimate each pollutant over a grid superimposed on the city map. Once the pollutants have been mapped on each route, they are analysed in order to consider the different alternatives for deciding and planning changes in speed or trajectory. We evaluated the application in the city of Valencia (Spain) as a use case under different scenarios, and showed the results to assess exposure to pollution on the routes of citizens.

The increase and diversity of low-cost air quality (AQ) sensors, as well as their flexibility and low power consumption, offers us the opportunity to integrate them into broad AQ wireless sensor networks, with the aim of enabling real-time monitoring and higher spatial sampling density of pollution in all parts of cities. Considering that the vast majority of the population lives in cities and the increase in respiratory/allergic problems in a large part of the population, it is of great interest to offer services and applications to improve their quality of life by avoiding pollution exposure in their movements in the open air. In the ECO4RUPA project, we focus on this kind of service, proposing an inclusive and intelligent routing ecosystem carried out using a network of low-cost AQ sensors with the support of 5G communications along with official AQ monitoring stations, using spatial interpolation techniques to enhance its spatial resolution. The goal of this service is to calculate healthy walking and/or cycling routes according to the particular citizen’s profile and needs. We provide and analyse the results of the proposed route planner under different scenarios (different timetables, congestion road traffic, and routes) and different user profiles, with a special interest in citizens with asthma and pregnant women, since both have special needs. In summary, our approach can lead to an approximately average reduction in pollution exposure of 17.82% while experiencing an approximately average increase in distance travelled of 9.8%.

Urban parks are a rich source of microbial diversity, as they are heavily used by city residents. In this study, we sampled a Mediterranean park and were able to isolate bacteria that have the ability to inhibit the growth of control microorganisms. Out of the 560 bacteria we tested, many displayed antibacterial activity, particularly against Salmonella sp. and K. pneumoniae. These results suggest that the microorganisms in the park are in close proximity to the human population. Additionally, the isolated bacteria demonstrated diverse enzymatic activities, possibly as a response to the environmental substances available to them, which could aid in the degradation of different compounds of interest. The study of the spatial distribution of soil parameters and the inhibition against relative-safe pathogens in an urban park in València (Spain) demonstrated a higher proportion of isolates in certain areas. These spatial data maps can help researchers understand the behaviors of bacterial populations on a regional level, which can assist in the creation of novel antimicrobial agents and promote advancements in public health.

Aquaponic health is a very important in the food industry field, as currently there is a huge amount of fishing farms, and the demands are growing in the whole world. This work examines the process of developing an innovative aquaponics health monitoring system that incorporates high-tech back-end innovation sensors to examine fish and crop health and a data analytics framework with a low-tech front-end approach to feedback actions to farmers. The developed system improves the state-of-the-art in terms of aquaponics life cycle monitoring metrics and communication technologies, and the energy consumption has been reduced to make a sustainable system.

The acoustic evaluation of indoor environments is common in the application of virtual acoustics. In addition, in the study of cultural heritage buildings, it is a useful tool, but it is not so common when describing the acoustic environment in intangible cultural heritage events and even in outdoor environments. In this paper, the acoustic environment of the Water Tribunal of the Plain of Valencia (Spain) is studied. It is analyzed from a soundscape perspective, characterizing the sound source and evaluating it within relation to the environment and evaluating its subjective response. With the research carried out, it has been obtained, on the one hand, a complete study of the acoustics of the environment of the Water Tribunal and, on the other, an enhancement of the Valencian tangible and intangible heritage.