Search

In aviation, aerospace, and other fields, nanomechanical resonators could offer excellent sensing performance. Among these, graphene resonators, as a new sensitive unit, are expected to offer very high mass and force sensitivity due to their extremely thin thickness. However, at present, the quality factor of graphene resonators at room temperature is generally low, which limits the performance improvement and further application of graphene resonators. Enhancing the quality factor of graphene resonators has emerged as a pressing research concern. In a previous study, we have proposed a new mechanism to reduce the energy dissipation of graphene resonators by utilizing phononic crystal soft-supported structures. We verified its feasibility through theoretical analysis and simulations. This article focuses on the fabrication of a phononic crystal soft-supported graphene resonator. In order to address the issues of easy fracture, deformation, and low success rate in the fabrication of phononic crystal soft-supported graphene resonators, we have studied key processes for graphene suspension release and focused ion beam etching. Through parameter optimization, finally, we have obtained phononic crystal soft-supported graphene resonators with varying cycles and pore sizes. Finally, we designed an optical excitation and detection platform based on Fabry–Pérot interference principle and explored the impact of laser power and spot size on phononic crystal soft-supported graphene resonators.

The key of heterostructure is the combinations created by stacking various vdW materials, which can modify interlayer coupling and electronic properties, providing exciting opportunities for designer devices. However, this simple stacking does not create chemical bonds, making it difficult to fundamentally alter the electronic structure. Here, we demonstrate that interlayer interactions in heterostructures can be fundamentally controlled using hydrostatic pressure, providing a bonding method to modify electronic structures. By covering graphene with boron nitride and inducing an irreversible phase transition, the conditions for graphene lattice-matching bonding (IMB) were created. We demonstrate that the increased bandgap of graphene under pressure is well maintained in ambient due to the IMB in the interface. Comparison to theoretical modeling emphasizes the process of pressure-induced interfacial bonding, systematically generalizes, and predicts this model. Our results demonstrate that pressure can irreversibly control interlayer bonding, providing opportunities for high-pressure technology in ambient applications and IMB engineering in heterostructures. [ABSTRACT FROM AUTHOR]

Background: In the recent decade, there has been substantial progress in the technologies and philosophies associated with diagnosing and treating anterior cruciate ligament (ACL) injuries in China. The therapeutic efficacy of ACL reconstruction in re-establishing the stability of the knee joint has garnered widespread acknowledgment. However, the path toward standardizing diagnostic and treatment protocols remains to be further developed and refined. Objective: In this context, the Chinese Association of Orthopaedic Surgeons (CAOS) and the Chinese Society of Sports Medicine (CSSM) collaboratively developed an expert consensus on diagnosing and treating ACL injury, aiming to enhance medical quality through refining professional standards. Methods: The consensus drafting team invited experts across the Greater China region, including the mainland, Hong Kong, Macau, and Taiwan, to formulate and review the consensus using a modified Delphi method as a standardization approach. As members of the CSSM Lower Limb Study Group and the CAOS Arthroscopy and Sports Medicine Study Group, invited experts concentrated on two pivotal issues: “Graft Selection” and “Clinical Outcome Evaluation” during the second part of the consensus development. Results: This focused discussion ultimately led to a strong consensus on nine specific consensus terms. Conclusion: The consensus clearly states that ACL reconstruction has no definitive “gold standard” graft choice. Autografts have advantages in healing capability but are limited in availability and have potential donor site morbidities; allografts reduce surgical trauma but incur additional costs, and there are concerns about slow healing, quality control issues, and a higher failure rate in young athletes; synthetic ligaments allow for early rehabilitation and fast return to sport, but the surgery is technically demanding and incurs additional costs. When choosing a graft, one should comprehensively consider the graft's characteristics, the doctor's technical ability, and the patient's needs. When evaluating clinical outcomes, it is essential to ensure an adequate sample size and follow-up rate, and the research should include patient subjective scoring, joint function and stability, complications, surgical failure, and the return to sport results. Medium and long-term follow-ups should not overlook the assessment of knee osteoarthritis.

Integrated 2-dimensional (2D) photonic devices such as monolayer waveguide has generated exceptional interest because of their ultimate thinness. In particular, they potentially permit stereo photonic architecture through bond-free van der Waals integration. However, little is known about the coupling and controlling of the single-atom guided wave to its photonic environment, which governs the design and application of integrated system. Here, we report the optical coupling of atomically guided waves to other photonic modes. We directly probe the mode beating between evanescent waves in a monolayer 2D waveguide and a silicon photonic waveguide, which constitutes a vertically integrated interferometer. The mode-coupling measures the dispersion relation of the guided wave inside the atomic waveguide and unveils it strongly modifies matter’s electronic states, manifesting by the formation of a propagating polariton. We also demonstrated light modulating and spectral detecting in this compact nonplanar interferometer. These findings provide a generalizable and versatile platform toward monolithic 3-dimensional integrated photonics.

Abstract Enriching the library of chiral plasmonic nanoparticles that can be chemically mass-produced will greatly facilitate the applications of chiral plasmonics in areas ranging from constructing optical metamaterials to sensing chiral molecules and activating immune cells. Here we report on a halide-assisted differential growth strategy that can direct the anisotropic growth of chiral Au nanoparticles with tunable sizes and diverse morphologies. Anisotropic Au nanodisks are employed as seeds to yield triskelion-shaped chiral nanoparticles with threefold rotational symmetry and high dissymmetry factors. The averaged scattering g-factors of the l- and d-nanotriskelions are as large as 0.57 and − 0.49 at 650 nm, respectively. The Au nanotriskelions have been applied in chiral optical switching devices and chiral nanoemitters. We also demonstrate that the manipulation of the directional growth rate enables the generation of a variety of chiral morphologies in the presence of homochiral ligands.

Discoid lateral meniscus (DLM) is the most common congenital variant of the lateral meniscus, which is prone to degeneration and lesions, and often leads to knee osteoarthritis. At present, there is no consensus on the clinical practice of DLM, and this expert consensus and practice guidelines on DLM was developed and approved by Chinese Society of Sports Medicine according to the Delphi method. Among 32 statements drafted, 14 statements were excluded for redundant information, and 18 statements achieved consensus. This expert consensus focused on the definition, epidemiology, etiology, classification, clinical manifestations, diagnosis, treatment, prognosis, and rehabilitation of DLM. Restoring the normal shape, retaining appropriate width and thickness, and ensuring the stability of the remnant meniscus is critical to sustaining the physiological function of the meniscus and preserving the knee. The partial meniscectomy with or without repair should be the first‐line treatment when possible, given that the clinical and radiological long‐term outcomes of total or subtotal meniscectomy are worse.

Glycolipid metabolic disorders (GLMD) refer to a series of metabolic disorders caused by abnormal processes of glucose and lipid synthesis, decomposition, and absorption in the body, leading to glucose and lipid excess, insulin resistance, and obesity. Probiotic intervention is a new strategy to alleviate metabolic syndrome. Lactobacillus paracasei JY062 (L. paracasei JY062) was separated from the Tibet-fermented dairy products. The results demonstrated a strong ability to relieve blood glucose disorders, blood lipid disorders, and tissue damage. The LPH group had the best effect, significantly decreasing the total cholesterol (TC), triglycerides (TG), low-density lipoprotein cholesterol (LDL-C), leptin, insulin, and free fatty acid (FFA) concentrations and increasing the high-density lipoprotein cholesterol, adiponectin, and GLP-1 level compared to HFD-group mice. L. paracasei JY062 could activate the APN-AMPK pathway, increased AdipoQ, AMPK GLUT-4, and PGC-1α mRNA expression and decreased SREBP-1c, ACC, and FAS mRNA expression. L. paracasei JY062 intervention decreased the relative abundance of harmful bacteria, increased the relative abundance of beneficial bacteria, and restored the imbalance of gut microbiota homeostasis caused by a high-glucose-fat diet. L. paracasei JY062 alleviated glucolipid metabolism disorders via the adipoinsular axis and gut microbiota. This study provided a theoretical basis for probiotics to ameliorate glucolipid metabolism disorders by regulating the adipoinsular axis.

Probiotics can prevent obesity and related metabolic complications. In our study, the protective effect and molecular mechanism of Lactobacillus rhamnosus JL1 (separated from the feces of healthy infants) on high-fat diet mice were investigated. After 10 weeks of dietary intervention with L. rhamnosus JL1 intervention, the body weight of the JL1 group (23.78 g) was significantly lower than that of the HFD group (26.59 g, p < 0.05) and the liver index was reduced. Serum biochemical analysis showed that the TC, TG and LDL-C contents of JL1 group mice were significantly decreased (p < 0.05). Histological images of the mice livers showed that the degree of lipid action and damage of hepatic cells were improved. L. rhamnosus JL1 activated the AMPK pathway, and reduced the gene expression of PPAR-γ, LXR-α and SREBP-1C. In addition, the protein expression of PPAR-γ and LXR-α were reduced. After dietary intervention with L. rhamnosus JL1, the concentration of acetic acid, propionic acid, and butyric acid were increased significantly, especially the concentration of butyric acid, which was 63.16% higher than that of the HFD group (p < 0.05). In conclusion, this study provided a theoretical reference for the development and application of probiotics derived from healthy infant feces in health products and functional foods.

Salmonella typhimurium (S. typhimurium) is a foodborne pathogen that has caused numerous outbreaks worldwide, necessitating the development of on-site strategy to prevent early contamination. Here, we set up an enzyme-free strategy for aptamer-catalyzed hairpin assembly in which salt-induced aggregation of unmodified gold nanoparticles (AuNPs) served as a colorimetric signal output, allowing on-site detection of S. typhimurium in milk. The aptamer-functionalized magnetic beads were used as a vehicle of specifically enriching target bacteria which conjugated with target aptamer to trigger the “Y” shape catalytic hairpin assembly (Y-CHA) circuit. Due to the hairpins desorbing from the surface of AuNPs to the formation of a large amount of double-stranded DNA (dsDNA), AuNPs turned from dispersion to aggregation in the presence of S. typhimurium, resulting in a change of the colorimetric signal from red to blue-gray. The signal output showed a linear relationship for S. typhimurium over a concentration range of 102 to 106 CFU/mL, with a sensitivity of 2.4 × 102 CFU/mL under optimal conditions. The visual protocol has excellent selectivity even in the presence of other competitive bacteria and has been validated in real milk samples with a sensitivity of 2.8 × 103 CFU/mL.