Search

Concrete pavements develop cracks with the accumulation of fatigue damage caused by the combined effect of vehicular and environmental loadings. In Mechanistic-Empirical (ME) design, the ratio of stresses to some measure of strength is used to evaluate incremental damage, which is then related to cracking. Typically, this measure is the Modulus of Rupture (MOR) of a beam made of the same material. The flexural strength is also known to vary with the thickness of the beam. However, the variation of flexural strength due the presence of eigenstresses from temperature or moisture distributions has not received sufficient attention. A non-linear fracture mechanics model demonstrated that the thickness-adjusted flexural strength can also be used for characterising the maximum elastic stress under a linear temperature distribution. However, under a non-linear temperature distribution, the material may sustain a higher or lower maximum elastic stress than the flexural strength. To model this, a practical analytical expression for the apparent flexural strength was derived and showed excellent agreement with numerical simulations as well as with a model based on equivalent elastic deformation energy. The model was used to show that the fatigue capacity under a typical axle load varies with various non-linear temperature distributions. [ABSTRACT FROM AUTHOR]

Moisture excess in granular pavement layers can decrease pavement performance leading to moisture-related distresses. The combination of trapped water and heavy traffic loads may substantially increase pore pressure and lead to shear failure if layer hydraulic conductivity is insufficient. Currently, most pavement analysis models are unable to predict pore pressure development, so the design and evaluation methods ignore this dynamic effect which may significantly underestimate the moisture damaging effect on pavements. This paper proposes the use of Biot's poroelasticity theory for modelling fully saturated unbound materials. The proposed methodology – Poroelastodynamic Finite Integration Technique (PEFIT) – was used to analyze axisymmetric multilayered pavement structures consisting of elastic and poroelastic layers. The model was verified and validated using a well-known commercial finite element solver and field pore pressure data, respectively. A sensitivity analysis was conducted by varying critical pavement design parameters. The PEFIT analysis of a three-layer pavement system with a poroelastic base layer has shown that a decrease in base hydraulic conductivity significantly increases the maximum pore pressure, especially for high-speed loads. Results also indicate substantial pore pressure and water movement in the base layer, which may induce a potential shear failure mechanism for unbound materials. [ABSTRACT FROM AUTHOR]

During concrete pavement construction, comprehensive information on concrete strength development is necessary for knowledgeable scheduling decisions. To improve in situ strength estimation, nondestructive tests can be combined to maximize available information and increase collection efficiency. Ultrasonic testing has a higher accuracy in strength estimation for early age concrete and the external device allows for more data to be easily collected, while maturity testing can use temperature models to predict strength development. A procedure was created that combines these methods and their strength models in the laboratory for improved and increased field strength data. Using the procedure allows more data to be collected with greater accuracy and provides an adjustable, predicted strength development. This improves the efficiency of fast-track construction projects without resorting to costly alternatives by providing more information on strength development of in situ concrete than traditional strength testing or nondestructive methods individually. [ABSTRACT FROM AUTHOR]