Search

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is managing the loads on the first wall within acceptable limits. Therefore, the conceptual design development of the STEP Prototype Power plant needs to be based on load estimates derived using legitimate plasma physics assumptions through dynamic and flexible tools. The current design foresees the STEP main chamber first wall to withstand steady-state heat loads of up to ∼ 1 MW/m 2 , excluding critical regions expected to receive higher heat loads such as the baffle regions approaching the divertors. These critical areas will require ad hoc assessments and will be designed with the presence of limiters. This article focuses on the models and methodology adopted for designing the 2-D poloidal contour of the STEP first wall, based on the anticipated charged particle and radiation heat loads during normal operation. Firstly, the models adopted for calculating the charged particle and radiation heat loads are introduced. The first model is validated through benchmarking against the particle tracing code SMARDDA, while the second model is verified by comparing it with data from the MAST-U experiment. Secondly, the model used to design the 2-D first wall contour according to the heat loads is explained. We acknowledge that this preliminary design stage assumes certain simplifications, notably an axisymmetric geometry, for computational efficiency and clarity in presentation. It is understood that subsequent design phases will address the complexities of real-world engineering, including non-axisymmetric effects, transient plasma scenarios, and the impact of disruptions on the first wall design. Finally, an automatic procedure based on these models is presented for defining the 2-D poloidal contour of the STEP first wall to minimize heat loads, taking into account the need to radiate most of the alpha-particle and auxiliary heating power. By providing an overview of the models, methodology, and an automatic procedure, this paper contributes to the design process of the STEP first wall, addressing the engineering challenges associated with fusion power plant development. • Proposes a methodological approach for designing the initial first wall contour of the STEP Prototype Power plant. • Addresses significant engineering challenges associated with managing heat loads on the first wall in fusion power plants. • Introduces models and methodology for predicting heat loads resulting from charged particles and radiation. • Develops an automatic procedure for defining the 2D poloidal contour of the STEP first wall to minimize heat loads. • Contributes to the ongoing design process of the STEP first wall and addresses engineering challenges in fusion power plant development. [ABSTRACT FROM AUTHOR]

As power plant design programmes approach the transition between the pre-conceptual and conceptual design phases, the systems code PROCESS has been improved to incorporate more detailed plasma physics, engineering, and analysis modules. Unlike many systems codes, PROCESS combines the physics modelling with both technology and costs analysis. Some of the key topics in the conceptual design phase are toroidal field (TF) magnet design, divertor power handling, operational sensitivity, and economic uncertainty analysis. Models covering these areas have been integrated or improved in PROCESS. During pre-conceptual design, systems codes are an essential tool for exploring fusion power plant concepts. They allow one to model the interaction of the plant systems and quickly perform reactor optioneering. To be able to carry out these large scoping studies, the fidelity of the models can be restricted to reduce the computational time. For example, the EUROfusion EU-DEMO baseline designs are created using the systems code PROCESS and the ability to measure these trade-offs has led to important design choices being examined during the DEMO pre-conceptual design phase. Ruling out unfeasible designs allows one to efficiently identify where in the design space to carry out detailed design work. The paper describes how PROCESS has begun retooling for use in later stages of power plant conceptual design. Details are given for new additions to the PROCESS uncertainty quantification tools, high-temperature superconducting magnet model, TF coil model, and new models for spherical tokamaks (STEP). Additionally, the paper covers recent developments on the novel systems code BLUEPRINT, which is being used in both the EUROfusion and STEP projects. The paper concludes with an outlook on systems code activities at UKAEA and work with external partners. [ABSTRACT FROM AUTHOR]

• CHIMERA will be uniquely capable of 'semi-integral' testing of fusion components. • Key systems have required specific development activities. • The large array first wall heating system is under qualification. • Certain diagnostics are de-risked via testing in a pulsed magnet field. • An integrated systems model of the commissioning mock-up is producing first results. The CHIMERA fusion technology facility will enable testing of large in-vessel component modules under reactor-like conditions of combined in-vacuum thermal power density and magnetic field. With an integral large superconducting magnet and a PWR-like water loop, CHIMERA is also ideally placed for experiments on liquid metal breeding blanket prototypes. Facility construction is underway at the UKAEA site in South Yorkshire. The superconducting magnet is fully wound and terminated, and the bespoke pulsed magnet power supply has been delivered. Even before construction and commissioning is complete, a parallel and supporting research and development programme is in progress and is reported here. A bespoke infrared heating system has been developed, capable of applying 0.5 MW/m2 to component surfaces up to the size of the ITER test blanket module first wall. The modules of this heater are highly specialised and designed to endure the high magnetic forces from the CHIMERA static and pulsed magnets. CHIMERA will feature a range of diagnostics, including load cells to measure static and pulsed magnetic forces, and induced current sensors, all of which have been tested to confirm acceptable operation in the pulsed magnetic field. Manufacture of the test mock-up to be used for facility commissioning is underway. Testing will be enhanced with simulation 'digital twin' capability, and a development project is now producing first virtual test results, informing commissioning of the CHIMERA device. [ABSTRACT FROM AUTHOR]