Search

In this paper, we introduce a novel direct maximum power point tracking (MPPT) approach that combines the backstepping controller (BSC) and the super-twisting algorithm (STA). The direct backstepping super-twisting algorithm control (BSSTAC) MPPT was developed to extract the maximum power point (MPP) produced by a photovoltaic (PV) generator connected to the battery through a boost DC-DC converter. To reduce the number of sensors required for the BSSTAC implementation, a high gain observer (HGO) was proposed to estimate the value of the state of the PV storage system from measurements of the PV generator voltage and current. The suggested technique is based on the quadratic Lyapunov function and does not employ a standard MPPT algorithm. Results show that the suggested control scheme has good tracking performance with reduced overshoot, chattering, and settling time as compared to the prevalent MPPT tracking algorithms such as perturb and observe (P&O), conventional sliding mode control (CSMC), BSC, and integral backstepping controller (IBSC). Finally, real-time findings using the dSPACE DS 1104 software indicate that the generator PV can accurately forecast the MPP, as well as the efficacy of the suggested MPPT technique. The provided approach's effectiveness has been validated by a comprehensive comparison with different methods, resulting in the greatest efficiency of 99.88% for BSSTAC. [ABSTRACT FROM AUTHOR]

In general, the structures of Multi-Active Bridge (MAB) converters that can be found in the literature are usually based on voltage converters. However, in some cases, it could be interesting to have a current-fed input due to load characteristics or operation constraints. This leads to a hybrid MAB structure mixing both current-fed and voltage-fed bridges. In this paper, a new hybrid-fed, fully coupled Triple-Active Bridge (TAB) converter topology with two voltage-fed ports and one current-fed port is studied, modelled and controlled. In the first place, a generalized average model (GAM) is developed for this system. After that, a reduced-order model is elaborated in order to simplify the behavioral study and control of this coupled system. A control strategy was also proposed in this paper, based on the developed mathematical model. Simulation results using Matlab/Simulink are presented to validate this study. [ABSTRACT FROM AUTHOR]

Power electronics converters are traditionally designed regarding efficiency, power density, cost, and reliability figures of merit. Today, with the extreme spread of power electronic applications in our modern societies, together with the earth limits in terms of materials resources, it is important to consider the ecological impact of the converter not only during its usage, but over its whole life cycle. This article introduces an eco-dimensioning methodology for analyzing and accounting for the energy consumption over the entire converter life. The analysis is applied on a small DC-DC converter considering the main components dual active bridge (DAB) converter. The planar transform is one of the key elements modeled in this article, including material and manufacturing conditions. The traditional and eco-dimensioning approaches are carried out and compared in order to emphasize the possible consequences on total energy cost. [ABSTRACT FROM AUTHOR]