Search

We present a radiative cooling material capable of enhancing albedo while reducing ground surface temperatures beneath fielded bifacial solar panels. Electrospinning a layer of polyacrylonitrile nanofibers, or nanoPAN, onto a polymer-coated silver mirror yields a total solar reflectance of 99 %, an albedo of 0.96, and a thermal emittance of 0.80. The combination of high albedo and high emittance is enabled by wavelength-selective scattering induced by the hierarchical morphology of nanoPAN, which includes both thin fibers and bead-like structures. During outdoor testing, the material outperforms the radiative cooling power of a state-of-the-art control by ∼20 W/m2 and boosts the photocurrent produced by a commercial silicon cell by up to 6.4 mA/cm2 compared to sand. These experiments validate essential characteristics of a high-albedo radiative-cooling reflector with promising potential applications in thermal and light management of fielded bifacial panels.

Functional thin film superlattices with stability in extreme environments can lead to transformative performance in optical and thermal applications such as thermophotovoltaics. In this work, key issues associated with defects that prevent layer-by-layer growth in epitaxial, low-miscibility oxide superlattices are investigated. Layer protrusions, approximately 8 nm wide and 3 nm thick, arise from a strain relaxation mechanism in 8 nm bilayer superlattices of Ba(Zr0.5Hf0.5)O3/MgO and propagate through the subsequent superlattice layers forming an inverted pyramid structure that is spatially phase offset from the matrix. The density and size of these defects scales with the number of interfaces in the sample, indicating that surface roughness during growth is a significant factor in the formation of these defects. In situ high temperature transmission electron microscopy (1000 °C, in vacuo) measurement reveals that phase decomposition of Ba(Zr0.5Hf0.5)O3 and decoherence of the superlattice is nucleated by these defects. This work highlights that achieving optimum growth conditions is imperative to the synthesis of single-crystalline superlattices with sharp interfaces for optimized performance in extreme environments. [ABSTRACT FROM AUTHOR]

We present a radiative cooling material capable of enhancing albedo while reducing ground surface temperatures beneath fielded bifacial solar panels. Electrospinning a layer of polyacrylonitrile nanofibers, or nanoPAN, onto a polymer-coated silver mirror yields a total solar reflectance of 99 %, an albedo of 0.96, and a thermal emittance of 0.80. The combination of high albedo and high emittance is enabled by wavelength-selective scattering induced by the hierarchical morphology of nanoPAN, which includes both thin fibers and bead-like structures. During outdoor testing, the material outperforms the radiative cooling power of a state-of-the-art control by ∼20 W/m2 and boosts the photocurrent produced by a commercial silicon cell by up to 6.4 mA/cm2 compared to sand. These experiments validate essential characteristics of a high-albedo radiative-cooling reflector with promising potential applications in thermal and light management of fielded bifacial panels. [ABSTRACT FROM AUTHOR]

Although spectrally selective materials play a key role in existing and emerging solar thermal technologies, temperature‐related degradation currently limits their use to below 700 °C in vacuum and even lower temperatures in air. Here a solar‐transparent refractory aerogel that offers stable performance up to 800 °C in air is demonstrated, which is significantly greater than its silica counterpart. This improved stability is attributed to the formation of a refractory aluminum silicate phase, which is synthesized using a conformal single cycle of atomic layer deposition within the high‐aspect‐ratio pores of silica aerogels. Based on direct heat loss measurements, the transparent refractory aerogel achieves a receiver efficiency of 75% at 100 suns and an absorber temperature of 700 °C, which is a 5% improvement over the state of the art. Transparent refractory aerogels may find widespread applicability in solar thermal technologies by enabling the use of lower‐cost optical focusing systems and eliminating the need for highly evacuated receivers. In particular, a shift to higher operating temperatures while maintaining a high receiver efficiency can enable the use of advanced supercritical CO2 power cycles and ultimately translate to an ≈10% (absolute) improvement in solar‐to‐electrical conversion efficiency relative to existing linear concentrating systems. [ABSTRACT FROM AUTHOR]

Recent advances in thermophotovoltaic (TPV) power generation have produced notable gains in efficiency, particularly at very high emitter temperatures. However, there remains substantial room for improving TPV conversion of waste, solar, and nuclear heat streams at temperatures below 1,100°C. Here, we demonstrate the concept of transmissive spectral control that enables efficient recuperation of below-bandgap photons by allowing them to transmit through the cell to be absorbed by a secondary emitter. We fabricate a semitransparent TPV cell consisting of a thin InGaAs-InP heterojunction membrane supported by an infrared-transparent heat-conducting substrate. The device absorbs less than 1% of below-bandgap radiation, resulting in a TPV efficiency of 32.5% at an emitter temperature of 1,036°C. To our knowledge, this represents an 8% absolute improvement (~33% relative) in efficiency relative to the best TPV devices at such low temperatures. By enabling near-zero photon loss, the semitransparent architecture facilitates high TPV efficiencies over a wide range of applications.