Search

The droplet breakups in an orifice jet mixer are studied to gain a deeper understanding of the breakup mechanism and establish breakup models used as population balance model source terms for accurate predictions. The breakup process and details are captured in situ using a high‐speed photomicrography system. Experiments are performed with different levels of pressure drop and mother droplet size. A complete breakup process consists of several different sub‐breakup events, hence the cascade breakup definition is adopted to determine statistical results. High breakup frequency is achieved under high pressure drop and small mother droplet size. The average number of daughter droplets is 102–105 and is positively correlated with the pressure drop and mother droplet size. The daughter droplet size distribution has a tailing phenomenon and is mainly affected by the pressure drop. New breakup models based on the above features are established and predict well with the experimental results. [ABSTRACT FROM AUTHOR]

In many regions, even if waste vegetable oil is used as raw material, the profits of biodiesel (fatty acid methyl ester, FAME) enterprises still remain restricted, and they are facing environmental problems caused by the by‐product glycerol. Hence, value‐added utilization of FAME and glycerol is a promising alternative to improve the competitiveness of biodiesel enterprises in the economy and environmental protection. In this paper, FAME and glycerol were utilized to prepare epoxidized acyl glycerides by transesterification and epoxidation. In the transesterification, acyl glycerides were prepared by reacting FAME and glycerol catalyzed by K2CO3. The contents of monoacyl glyceride, diacyl glyceride, and triacyl glyceride in the acyl glycerides were about 50%, 40%, and 10%, and the optimal conditions were a temperature of 200°C and the molar ratio of FAME to glycerol of 1:1. In the epoxidation, selectivity of epoxides was significantly affected by monoacyl glyceride content, and a treatment method was developed to control the monoacyl glyceride content <5%. In addition, the plasticity of epoxidized acyl glycerides to partially substitute dioctyl phthalate in polyvinyl chloride was studied, the overall mechanical properties, thermal stability, and extraction resistance were improved. In this work, FAME and glycerol were utilized to prepare epoxidized acyl glycerides with higher value‐added, which provide a potential solution for improving the market competitiveness of biodiesel enterprises. [ABSTRACT FROM AUTHOR]

A heavy-duty anticorrosive powder coatings with its glass transition temperature (Tg2) of more than 120 °C has been developed, which can be applied and rapidly cured on the surface of duplex stainless steel pipes. By means of formula modification of different epoxy resins, curing agents and coupling agents, the problem that the Tg2 of conventional epoxy powder coatings is less than 120 °C can be solved, meanwhile the film defects such as boiling adhesion and cathodic stripping are solved. Thus, the coatings with high Tg2 can be used for the protection of the exterior surface of stainless steel pipes wherein the temperature of medium is more than 100 °C. It enriches the portfolio of anticorrosive powder coatings and widens the applications of powder coatings. [ABSTRACT FROM AUTHOR]