Search

The transformation between Cr(III) and Cr(VI) occurs in Cr-contaminated soil, which can be regulated by root-soil interactions, under natural conditions. In situ investigation of the effectiveness of different reductants in reducing Cr(VI) to Cr(III), and thereby the reoccurrence risk in reduced Cr-contaminated soil, can improve the understanding of Cr biogeochemistry and toxicity. Traditional and high-resolution diffusive gradients in thin films (DGT) were used to measure Cr(VI) availability and rhizosphere effect controlling the chemical behaviors of Cr(VI) in the rice rhizosphere microdomain. The Cr(VI) concentration in the soil solution (Csoln) of the rhizosphere region varied according to the reductant type and followed the order: Molasses > CaS4 >Fe(II). Rice root activity increased the Csoln in the rhizosphere region by 2.16 μg/L, 1.90 μg/L, and 1.08 μg/L for Fe(II), CaS4, and Molasses treatments, respectively. The Cr(VI) concentration measured by DGT (CDGT) in the reduced Cr-contaminated soils increased from 0.96–1.17 μg/L in the bulk region to 1.23–1.76 μg/L in rhizosphere region. The variation in the effective concentration of Cr(VI) (CE) was similar to that of Csoln in the rice rhizosphere microdomain. Csoln accounted for 14.71–19.36% of the CE, further suggesting that bioavailable Cr(VI) mainly originated from the replenishment from the solid phase. The sequence of the average Cr(VI) flux in the reduced Cr-contaminated soil was Molasses, CaS4, and Fe(II). Except for Molasses, there was no obvious Cr(III) in Fe(II) and CaS4. For Fe(II), a higher phosphate flux in the rhizosphere microdomain hindered Cr(VI) uptake. High-resolution imaging provides a theoretical basis for the bioavailability evaluation and remediation of Cr-contaminated soil. Compared with CaS4 and Molasses, Fe(II) was the most effective reductant for remediating Cr-contaminated soils. [ABSTRACT FROM AUTHOR]

Phase relations in the MgSiO3–MgAl2O4–Al2O3 system are investigated at 27 GPa and 2000–2600 K using a multi‐anvil apparatus. The AlAlO3 content in the bridgmanite increases from 8.6 to 20.0 mol% with increasing temperature from 2000 to 2600 K, while the MgAlO2.5 content remains nearly constant, that is, 3–4 mol% at these temperatures. Therefore, the presence of an additional Al‐bearing phase suppresses the oxygen vacancy substitution for Al3+ in bridgmanite. Conversely, significant amounts of the Al8/3O4 component can be dissolved into the calcium‐ferrite type MgAl2O4–Mg2SiO4–Al8/3O4 phase (CF‐phase), implying that the CF‐phase likely contains some amount of vacancies. Therefore, the CF‐phase could also be a candidate mineral for transporting volatiles into the lower mantle. Our results, combined with previous studies on Al‐bearing bridgmanite, indicate that, once the Al per formula unit exceeds 0.12 in bridgmanite, the MgAlO2.5 content remains nearly constant and the AlAlO3 component becomes dominant. Plain Language Summary: Bridgmanite, the most abundant mineral in the Earth's mantle, can contain Al3+ in the forms of MgAlO2.5 and AlAlO3. To constrain the substitution mechanism of Al3+ in bridgmanite, we investigate the MgAlO2.5 and AlAlO3 contents in bridgmanite coexisting with a calcium‐ferrite type phase and corundum at different temperatures. Our results demonstrate that the MgAlO2.5 content reaches saturation (3–4 mol%) when an additional Al‐bearing phase exists in the system. Key Points: The MgAlO2.5 content in bridgmanite remains constant with temperature when bridgmanite coexists with corundum and the CF‐phaseThe MgAlO2.5 content in bridgmanite reaches a solubility of 3–4 mol% when bridgmanite coexists with an additional Al‐bearing phaseA significant amount of the Al8/3O4 component can be dissolved into the CF‐phase [ABSTRACT FROM AUTHOR]

Bridgmanite may contain a large proportion of ferric iron in its crystal structure in the forms of FeFeO3 and MgFeO2.5 components. We investigated the pressure dependence of FeFeO3 and MgFeO2.5 contents in bridgmanite coexisting with MgFe2O4‐phase and with or without ferropericlase in the MgO‐SiO2‐Fe2O3 ternary system at 2,300 K, 33 and 40 GPa. Together with the experiments at 27 GPa reported in Fei et al. (2020, https://doi.org/10.1029/2019GL086296), our results show that the FeFeO3 and MgFeO2.5 contents in bridgmanite decrease from 7.6 to 5.3 mol % and from 2 to 3 mol % to nearly zero, respectively, with increasing pressure from 27 to 40 GPa. Accordingly, the total Fe3+ decreases from 0.18 to 0.11 pfu. The formation of oxygen vacancies (MgFeO2.5 component) in bridgmanite is therefore dramatically suppressed by pressure. Oxygen vacancies can be produced by ferric iron in Fe3+‐rich bridgmanite under the topmost lower mantle conditions, but the concentration should decrease rapidly with increasing pressure. The variation of oxygen‐vacancy content with depth may potentially affect the physical properties of bridgmanite and thus affect mantle dynamics. Plain Language Summary: Bridgmanite is the most abundant mineral in the Earth's lower mantle. Although its basic chemical formula is MgSiO3, large amounts of Fe3+ can be added in the following two ways: (1) Two Fe3+ replace Mg2+ and Si4+ and form the FeFeO3 component. This is called charge‐coupled substitution because the overall charge does not change. (2) One Fe3+ replaces one Si4+ and forms the MgFeO2.5 component. Here the loss of positive charge is compensated by a loss of oxygen and is therefore called oxygen‐vacancy substitution. In this study, we measured the effect of pressure on the abundance of these two components of bridgmanite. We found that the MgFeO2.5 content decreases greatly with increasing pressure. Some oxygen sites may therefore be vacant in bridgmanite at the top of lower mantle, but the concentration of oxygen vacancies should decrease rapidly in deeper regions. The decrease of oxygen‐vacancy concentration in bridgmanite will change the nature of the lower mantle, for example, rocks will become harder, and electrical conductivity will decrease with increasing depth. Key Points: MgFeO2.5, FeFeO3, and total Fe3+ contents in bridgmanite decrease with increasing pressureFe3+‐linked oxygen vacancies in bridgmanite are destabilized by increasing pressureMgFeO2.5 can be formed in Fe3+‐rich bridgmanite under the topmost lower mantle conditions [ABSTRACT FROM AUTHOR]

This paper investigates the distributed event-triggered control problems of second-order nonlinear multi-agent systems (MASs) with directed graph. Firstly, an event-triggered consensus algorithm is developed for second-order nonlinear MASs. It is proved that MASs reach practical consensus and Zeno-behavior doesn't occur. Secondly, for leader–follower MASs, an event-triggered tracking algorithm is presented, which ensures that follower agents track leader agent even when leader agent has a nonzero input. Finally, a numerical simulation is given to show effectiveness of the proposed consensus algorithm. [ABSTRACT FROM AUTHOR]

The traditional reclosing device cannot distinguish the fault nature of blind reclosing, which will cause secondary damage to the faulty power system. In addition, the existence of fault resistance makes fault location complicated. This paper proposes an automatic reclosing device which enters the fault line through the single-phase AC voltage signal of the power electronic converter. The device responds to the comprehensive utilization of the system harmonic impedance and locates the fault current through the comprehensive utilization of the system harmonic impedance judgment. So, the device can eliminate the influence of fault resistance for positioning the result. Because the measurement is performed only at the head-end circuit, no communication line is required. If a permanent fault is found in the system, the fault information and the latching circuit breaker should be indicated. If there is no fault notification, the circuit breaker should be switched. The equipment has been proved to have accurate identification to detect the results of various fault types, so it can avoid the secondary damage of the power system caused by blind reclosing. [ABSTRACT FROM AUTHOR]

Heterogeneous chemistry and aerosol-radiation interaction (ARI) are considered two of the key mechanisms affecting haze formation and their reasonable parameterizations in atmospherically chemical models play an important role in accurate haze or air quality prediction. However, until the present, their relative contributions to severe haze have rarely been evaluated. Using the double-way atmospherically chemical model GRAPES_Meso5.1/CUACE CW, the relative contributions of heterogeneous chemistry and ARI to PM 2.5 are investigated under different pollution levels in Middle-Eastern China (MEC) during December 2016. Study results show that the combined effects of heterogeneous chemistry and ARI generate 29.7% of total PM 2.5 mass in MEC of December 2016, of which ARI contributes 19.7%, much higher than heterogeneous chemistry (6.1%). However, heterogeneous chemistry is important for reasonable reproduction of the proportion of secondary inorganic aerosols (SIA) of PM 2.5 , especially during heavy haze. Both the contributions of heterogeneous chemistry and ARI to PM 2.5 increase with the haze pollution aggravation but to different degrees. The contribution of heterogeneous chemistry to modeled PM 2.5 concentration rises from 4.0% on clean days to 6.6% under moderate pollution and 7.8% under heavy haze. And that of ARI increases rapidly from 9.1% on clean days to 21.0% under moderate pollution and 29.1% during heavy pollution. It is worth noticing that there is an additional contribution to PM 2.5 caused by the combination of heterogeneous chemistry and ARI except for their respective contributions, which reaches up to 7.3% of PM 2.5 mass and 18.5% of SIA generation under heavily polluted conditions. This is because ARI further promotes heterogeneous oxidation of SO 2 and NO x by increasing the aerosol surface area concentration (SAC), causing additional SIA production via heterogeneous pathways. This work indicates the contribution of ARI to severe haze formation not only by altering meteorological conditions but also by reforming the chemical processes in the model. (a) The interaction mechanism between heterogeneous chemistry and ARI in atmospheric chemistry model GRAPES_Meso5.1/CUACE; (b) Percentage contributions of the combined effects of heterogeneous chemistry and ARI (Δ1), heterogeneous chemistry alone (Δ2), ARI alone (Δ3), and the interaction between the two (Δ4) to PM 2.5 mass concentration in MEC. [Display omitted] • Relative contributions of heterogeneous chemistry and ARI to PM 2.5 are evaluated under different pollution levels. • ARI contributes much more to extreme PM 2.5 during severe haze than heterogeneous chemistry. • Their combined effects exceed the sum of the two because ARI further promotes the heterogeneous oxidation of SO 2 and NO x. [ABSTRACT FROM AUTHOR]

Visibility degradation is a pervasive environmental problem in winter in China and its prediction accuracy is therefore important, especially in low visibility conditions. However, current visibility parameterization algorithms tend to overestimate low visibility (<5 km) during haze–fog events. The key point of low visibility calculation and prediction depends on a reasonable understanding of the correlation between visibility, PM2.5 concentration, and relative humidity (RH). Using the observations of PM2.5 concentration and meteorology from December 2016 to February 2017, under different RH levels, the relative contribution differences of PM2.5 concentrations and RH to visibility degradation are investigated in depth. On this basis, new multiple nonlinear regressions for low visibility are developed for eight regions of China. The results show that under relatively low RH conditions (<80% or 85%), PM2.5 concentration plays a leading role in visibility changes in China. With the increase in RH (80–90% or 85–95%), the PM2.5 concentration corresponding to the visibility of 10 and 5 km decreases and the contribution of RH becomes increasingly important. When the RH grows to >95%, a relatively low PM2.5 concentration could also lead to visibility decreasing to <5 km. Within this range, the PM2.5 concentration corresponding to the visibility of 5 km in Central China (CC), Sichuan Basin (SCB), and Yangtze River Delta (YRD) is approximately 50, 50, and 30 μg m−3, and that in Beijing-Tianjin-Hebei (BTH) and Guanzhong Plain (GZP) is approximately 125 μg m−3, respectively. Specifically, based on these contribution differences, new multiple nonlinear regression equations of visibility, PM2.5 concentration, temperature, and dew point temperature of the eight regions (Scheme A) are established respectively after grouping the datasets by setting different RH levels (BTH, GZP, and North Eastern China (NEC): RH < 80%, 80 ≤ RH < 90% and RH ≥ 90%; CC, SCB, YRD, and South China Coastal (SCC): RH < 85%, 85 ≤ RH < 95% and RH ≥ 95%; Xinjiang (XJ): RH < 90% and RH ≥ 90%). According to the previous regression methods, we directly established the multiple regression models between visibility and the same factors as a comparison (Scheme B). Statistical results show that the advantage of Scheme A for 5 and 3 km evaluation is more significant compared with Scheme B. For the five low visibility regions (BTH, GZP, CC, SCB, and YRD), RMSEs of Scheme A under visibility <5 and 3 km are 0.77–1.01 and 0.48–0.95 km, 16–43 and 24–57% lower than those of Scheme B, respectively. Moreover, Scheme A reproduced the winter visibility in BTH, GZP, CC, SCB, YRD, and SCC from 2016 to 2020 well. The MAEs, MBs, and RMSEs under visibility < 5 km are 0.44–1.41, −1.33–1.24, and 0.58–2.36 km, respectively. Overall, Scheme A is confirmed to be reliable and applicable for low visibility prediction in many regions of China. This study provides a new visibility parameterization algorithm for the haze–fog numerical prediction system. [ABSTRACT FROM AUTHOR]

• We synthesized high-quality single crystals of bridgmanite up to 300 μm in size. • Bridgmanite crystals contain less than 50 ppm wt. H 2 O at the uppermost lower mantle. • The majority of the top of a pyrolitic lower mantle is nearly dry. Water solubility in the dominant lower-mantle bridgmanite phase remains controversial. Discrepancies between previous results highlight the importance of the growth high-quality single crystals of bridgmanite under high-pressure and high-temperature conditions corresponding to the top of the lower mantle. Here we synthesized high-quality single crystals of aluminous bridgmanite up to 300 μm in size that were saturated with hydrous melt at 24–26 GPa and 1700–1900 K using both stoichiometric and MgO-rich non-stoichiometric hydrous starting materials in a multi-anvil press. Fourier-transform infrared spectroscopy measurements on clear and pure spots of the single-crystal bridgmanites did not detect any pronounced OH-stretching bands, which were prominent in some earlier studies. The present results support that the lower-mantle dominated bridgmanite is nearly dry, at least at the top of the lower mantle, and that Al3+ and Fe3+ cannot enhance water incorporation into the crystal structure even in the presence of oxygen vacancies. Large partition coefficients of water between transition-zone minerals and dry lower-mantle dominated bridgmanite further support dehydration melting at the top of the lower mantle. We suggest that the majority of the top of a pyrolitic lower mantle is nearly dry based on the dry principal minerals and stability of hydrous phases in this region. [ABSTRACT FROM AUTHOR]

Anaerobic digestion is an important means to turn agricultural waste into resources and an important way to address the challenges in treating vegetable residues in China. In this study, the co-digestion of dairy manure with tomato residue was investigated to clarify the effect of the total solids (TS) of the digestion substrate on methane's production and mechanism using the self-made anaerobic digestion device. The results showed that all treatments could rapidly ferment methane and that the daily methane production showed a trend of increasing first and then decreasing. The optimal concentrations of the digestion substrate for liquid anaerobic digestion (L-AD), hemi-solid-state anaerobic digestion (HSS-AD), and solid-state anaerobic digestion (SS-AD) were 10%, 18%, and 25%, respectively. Compared with SS-AD and HSS-AD, L-AD gas production peaked 3–6 days earlier. Treatment TS25 had the best cumulative methane production, reaching 117.4 mL/g VS. However, treatment TS6 had acid accumulation and a very unstable system. The cumulative methane production of SS-AD was higher than that of HSS-AD and L-AD. Firmicutes and Bacteroidetes were the dominant flora, and Methanoculleus, Methanosarcina, and Methanobrevibacter were the main archaeal groups. The TS significantly changed the microbial community composition of the digestion system, especially the low TS treatment. The results presented herein indicated that TS significantly changed the bacterial and archaeal community composition of the digestion system, and thus with the increase in TS from 6% to 25%, the methane yield increased. [ABSTRACT FROM AUTHOR]

As one of the most likely alternatives to traditional vapor compression refrigeration technology, solid refrigeration technology based on the barocaloric effect (BCE) has attracted extensive attention in recent years. Spin-crossover (SCO) compounds are considered suitable for working at low driving pressures due to high-pressure sensitivity and small hysteresis width. However, the entropy change (ΔSSCO) of the SCO compound is smaller than that of other excellent barocaloric materials (plastic crystals and two-dimensional perovskites). Here, we report the BCE of the SCO compound {Fe(pz)2(BH3CN)2} (pz = pyrazine) with a smaller molar mass and a third source of entropy change besides electron and vibrational entropy changes. Compound {Fe(pz)2(BH3CN)2} exhibits high pressure sensitivity ( d T 1 / 2 d P = 20.2 K kbar−1) as well as entropy change (Δ S SCO = 202 J kg−1 K−1). The maximum values of reversible isothermal entropy change (ΔSit,rev,max) and adiabatic temperature change (ΔTad,rev,max) at 1 kbar are only 103 J kg−1 K−1 and ∼0 K, respectively, due to the hysteresis behavior. However, at sufficiently high driving pressures, ΔSit,rev,max exceeds 200 J kg−1 K−1, and ΔTad,rev,max can reach ∼47 K, which exceeds all SCO compounds reported in BCE studies and is comparable to some plastic-crystalline and two-dimensional perovskite barocaloric materials. The excellent BCE of the SCO compound {Fe(pz)2(BH3CN)2} is mainly due to its small molar mass, which makes the unit mass compound exhibit higher ΔSSCO, while the introduction of the third source of entropy change—the reorientation entropy change (ΔSreo), only plays a small role. This is expected to promote the practical application of SCO compounds as barocaloric refrigerants. [ABSTRACT FROM AUTHOR]

MgSiO3 majorite is the most significant endmember of the Al‐deficient majorite garnets that form at depths higher than ∼400 km, in the mantle transition zone (MTZ). Here, we report elastic wave velocity measurements on polycrystalline MgSiO3 majorite samples, up to 18.4 GPa and 2000 K by ultrasonic interferometry techniques combined with in situ X‐ray diffraction measurements in a multianvil apparatus. Our data show MgSiO3 majorite has the lowest elastic moduli among silicate garnet endmembers, under the pressure and temperature conditions of the MTZ. These new data combined with those of other garnet endmembers allowed to estimate VP and VS of majorite with compositions relevant to the MTZ. The results suggest that variation of MgSiO3 component in garnet may play a role for interpreting seismic gradients atop the 410‐km discontinuity while below ∼520 km, the velocity contrasts hold too low values to explain the discrepancy between mineral physics data and seismological observations. Plain Language Summary: Majorite is an important constituent of mantle garnet that form at depths higher than ∼400 km, in the Earth's mantle transition zone. Here, we report elastic wave velocity measurements on polycrystalline MgSiO3 majorite samples, up to 18.4 GPa and 2000 K by ultrasonic interferometry techniques combined with in situ X‐ray diffraction measurements in a multianvil apparatus. Our data show MgSiO3 majorite has the lowest elastic moduli among other silicate garnets and therefore may play a role for interpreting the steep seismic gradients across the 410‐km discontinuity while below ∼520 km, it holds too low seismic contrast to explain the discrepancy between mineral physics data and seismological observations. Key Points: Sound velocities of MgSiO3 majorite were measured up to 18.4 GPa and 2000 KElastic softening increase gradually upon increasing MgSiO3 content in mantle garnetsPyrolite and mid‐ocean ridge basalts majorite are unlikely to explain the high VP and VS of the bottom mantle transition region [ABSTRACT FROM AUTHOR]

(Mg, Fe, Al)(Si, Al)O3 bridgmanite is the most abundant mineral of Earth′s lower mantle. Al is incorporated in the crystal structure of bridgmanite through the Fe3+AlO3 and AlAlO3 charge coupled (CC) mechanisms, and the MgAlO2.5 oxygen vacancy (OV) mechanism. Oxygen vacancies are believed to cause a substantial decrease of the bulk modulus of aluminous bridgmanite based on first‐principles calculations on the MgAlO2.5 end‐member. However, there is no conclusive experimental evidence supporting this hypothesis due to the uncertainties on the chemical composition, crystal chemistry, and/or high‐pressure behavior of samples analyzed in previous studies. Here, we synthesized high‐quality single crystals of bridgmanite in the MgO–AlO1.5–SiO2 system with different bulk Al contents and degrees of CC and OV substitutions. Suitable crystals with different compositions were loaded in resistively heated diamond anvil cells and analyzed by synchrotron X‐ray diffraction at pressures up to approximately 80 GPa at room temperature and 35 GPa at temperatures up to 1,000 K. Single‐crystal structural refinements at high pressure show that the compressibility of bridgmanite is mainly controlled by Al–Si substitution in the octahedral site and that oxygen vacancies in bridgmanite have no detectable effect on the bulk modulus in the compositional range investigated here, which is that relevant to a pyrolytic lower mantle. The proportion of oxygen vacancies in Al‐bearing bridgmanite has been calculated using a thermodynamic model constrained using experimental data at 27 GPa and 2,000 K for an Fe‐free system and extrapolated to pressures equivalent to 1,250 km depth using the thermoelastic parameters of Al‐bearing bridgmanite determined in this study. Plain Language Summary: Earth′s lower mantle, spanning from approximately 660 to 2,890 km depth, is mainly composed of bridgmanite, (Mg, Fe, Al)(Si, Al)O3 with a distorted perovskite‐type structure. In the topmost 500 km of the lower mantle, experiments showed that an MgAlO2.5 oxygen vacancy component may be present in bridgmanite. However, the effect of oxygen vacancies on the thermoelastic properties of bridgmanite is still not well constrained. These parameters are of crucial importance not only to model the thermodynamic stability of bridgmanite components at high‐pressure and high‐temperature but also to calculate the physical properties of lower mantle rocks. Here, we have determined the high‐pressure and high‐pressure‐temperature equations of state of three bridgmanite samples having different concentrations of Al and oxygen vacancies using X‐ray diffraction in diamond anvil cells. These data are complemented by the analysis of the bridgmanite crystal structure as a function of pressure, which revealed that oxygen vacancies have a minor effect on the elastic properties of bridgmanite at concentrations relevant for the lower mantle. Combining our results with experimental data on the stability of bridgmanite in the MgO–AlO1.5–SiO2 system, we have modeled the thermodynamic stability of the MgAlO2.5 component as a function of pressure and bulk Al content. Key Points: The thermal equation of state of Al‐bearing bridgmanite was determined for the first time using single crystalsThe bulk compressibility of Al‐bearing bridgmanite is mostly controlled by Al‐Si substitution in the octahedral siteUsing the obtained equation of state parameters, we modeled the pressure dependency of oxygen vacancies in bridgmanite in MgO–AlO1.5–SiO2 [ABSTRACT FROM AUTHOR]

Diamond is a typical superhard multifunctional material with excellent properties such as the highest hardness, ultra-wide band gap and the highest thermal conductivity. The reserve of natural diamond is small and the price is expensive. Color diamonds are a very small part of nature diamonds and their coloring mechanisms are extremly complicated. It is a effective method to synthesize diamond by high temperature and high pressure method, but it is still a great challenge to modulate and realize color diamonds. In this paper, the quality, structural defects and impurities of color (pink and green) diamonds were studied by Raman, photuluminescence, infrared and visible absorption technologies, and the quality, defect changes with temperature and the cause of color were studied in detail. It is found that the coloring mechanism was related to electrically neutral N2 V defect (H3), shear stress, plastic deformation and NV0/NV- color center etc. Obtaining color diamonds by various methods is not only for their highly valued gemstones, but also helps people to further understand the formation mechanism of diamond, and provides a new reference for the cultivation of colored diamonds. [ABSTRACT FROM AUTHOR]

Speciation of thallium (Tl) controls its fate and biogeochemical behaviors. Thus, a sensitive and accurately approach for Tl monitoring is of great demand due to its ultra-low concentration and sensitivity to redox change. In this study, diffusive gradients in thin-films technique (DGT) assembled with novel titanium peroxide (TP) binding gels (TP-DGT) was developed for in situ measurement of dissolved Tl(I) and Tl(III) in waters and sediments. Laboratory test showed a linear mass accumulation of Tl(I) and Tl(III) on the TP binding gels with the deployment time from 4 to 72 h. A fascinating performance of this novel DGT was achieved in a pH range of 4–9, ionic strength range of 0.1–200 mmol L−1, and humic acid concentration of 0–30 mg L−1 with a low detection limit of 0.3 ng L−1 for Tl(I) and 0.6 ng L−1 for Tl(III). The TP binding gels own excellent stability (1–365 d) and high capacity (73.5 μg Tl disc−1) which are suitable for long-term monitoring. Field application in a river indicated that TP-DGT could work effectively, comparable to the grab sampling in waters. For the first time, the TP-DGT coupled with oxygen optode was successfully applied to map 2D distribution patterns of Tl and oxygen simultaneously in the rhizosphere of M. verticillatum L. This study confirms TP-DGT is a promising tool for routine monitoring of Tl in waters and for investigating biogeochemical processes of Tl in sediments. [Display omitted] • A novel TP-DGT is developed for in situ measuring Tl in waters and sediments. • TP-DGT can work well in normal environmental conditions. • TP-DGT coupled with oxygen optode can map 2D distribution patterns of Tl and O 2. • The novel TP-DGT can be applied in aquatic systems as a promising monitoring tool. [ABSTRACT FROM AUTHOR]

In this work, (Bi 0.65-0.65 x Ba 0.35-0.35 x Nd x)(Fe 0.65-0.65 x Ti 0.35-0.35 x Nb x)O 3+ x (abbreviated as: BFBT- x NN, x = 0, 0.04, 0.08 and 0.12) ceramics were fabricated through a solid-state reaction method, aiming to obtain high-performance capacitor materials. BFBT ceramics have attracted increasing attention as potential energy storage materials because of their excellent dielectric and ferroelectric properties. However, two handicaps limit the large improvement of their energy storage performance (ESP). One is the large hysteresis of their polarization (P)-electric field (E) loops; the other is the low dielectric breakdown strength (E b), which has a close correlation with the inevitable defects present in BF-based ceramics. Herein, we designed a co-doping strategy to overcome the two handicaps in order to achieve high ESP in BFBT ceramics. In this strategy, the trivalent rare earth Nd3+ ions and high valence Nb5+ ions are simultaneously introduced at the perovskite A- and B-sites of BFBT ceramics, which is called NN co-doping. The NN co-doping enhances the relaxor properties of BFBT ceramics due to the enhanced composition and charge fluctuations and promotes the formation of the Bi-rich phases, which contribute to the appearance of a slim P - E loop. Meanwhile, the E b of BFBT ceramics is enhanced, which is ascribed to the significantly decreased oxygen vacancy concentration, the reduced grain size and the Bi-rich phases. Benefitting from these factors, a high recoverable energy storage density (W rec) of 3.64 J/cm3 and energy storage efficiency (η) of 88% are simultaneously obtained under an enhanced E b of 330 kV/cm in BFBT-0.08NN ceramics. Moreover, the ESP of BFBT-0.08NN ceramics shows good thermal stability (30–150 °C) and charge-discharge properties. These results indicate that BFBT-0.08NN ceramics could be a promising capacitor material. [ABSTRACT FROM AUTHOR]

Objective: To analyze the associations between gestational weight gain (GWG) and perinatal outcomes based on the GWG guidelines of the Chinese Nutrition Society (CNS) and the Institute of Medicine (IOM). Methods: This was a retrospective study with 9075 low‐risk singleton pregnant women. Logistic regression model was used to analyze associations between GWG categories and perinatal outcomes. Sensitivity analyses were performed based on pre‐pregnancy body mass index (calculated as weight in kilograms divided by the square of height in meters). Results: Excessive GWG as defined by the two guidelines was associated with a higher risk of adverse perinatal outcomes. Inadequate GWG was associated with higher risks of small for gestational age (adjusted odds ratio [aOR] 1.34, 95% confidence interval [CI] 1.10–1.64) and preterm birth (aOR 1.70, 95% CI 1.22–2.36), but a lower risk of large for gestational age (LGA) (aOR 0.77, 95% CI 0.63–0.95) according to the IOM guidelines. When using the CNS guidelines, inadequate GWG was associated with only a lower risk of preterm birth (aOR 1.80, 95% CI 1.19–2.70). Sensitivity analyses suggested that excessive GWG was associated with a higher risk of LGA in underweight women. Conclusions: Both guidelines could demonstrate the relationship between GWG and adverse perinatal outcomes. The CNS guidelines were more suitable for the Chinese population with underweight or normal weight before pregnancy, whereas IOM was more suitable for pregnant women with inadequate GWG. Synopsis: Chinese Nutrition Society guidelines were generally better for Chinese woman, but IOM guidelines were more appropriate for pregnant women with inadequate gestational weight gain. [ABSTRACT FROM AUTHOR]

Data assimilation techniques are one of the most important ways to reduce the uncertainty in atmospheric chemistry model input and improve the model forecast accuracy. In this paper, an ensemble optimal interpolation assimilation (EnOI) system for a regional online chemical weather numerical forecasting system (GRAPES_Meso5.1/CUACE) is developed for operational use and efficient updating of the initial fields of chemical components. A heavy haze episode in eastern China was selected, and the key factors affecting EnOI, such as localization length scale, ensemble size, and assimilation moment, were calibrated by sensitivity experiments. The impacts of assimilating ground-based PM 2.5 observations on the model chemical initial field PM 2.5 and visibility forecasts were investigated. The results show that assimilation of PM 2.5 reduces the uncertainty in the initial PM 2.5 field considerably. Using only 50 % of observations in the assimilation, the root mean square error (RMSE) of initial PM 2.5 for independent verification sites in mainland China decreases from 73.7 to 46.4 µ g m -3 , and the correlation coefficient increases from 0.58 to 0.84. An even larger improvement appears in northern China. For the forecast fields, assimilation of PM 2.5 improves PM 2.5 and visibility forecasts throughout the time window of 24 h. The PM 2.5 RMSE can be reduced by 10 %–21 % within 24 h, and the assimilation effect is the most remarkable in the first 12 h. Within the same assimilation time, the assimilation efficiency varies with the discrepancy between model forecasts and observations at the moment of assimilation, and the larger the deviation, the higher the efficiency. The assimilation of PM 2.5 further contributes to the improvement of the visibility forecast. When the PM 2.5 increment is negative, it corresponds to an increase in visibility, and when the PM 2.5 analysis increment is positive, visibility decreases. It is worth noting that the improvement of visibility forecasting by assimilating PM 2.5 is more obvious in the light-pollution period than in the heavy-pollution period. The results of this study show that EnOI may provide a practical and cost-effective alternative to the ensemble Kalman filter (EnKF) for the applications where computational cost is the main limiting factor, especially for real-time operational forecast. [ABSTRACT FROM AUTHOR]

The emergence of metal‐organic frameworks (MOFs) provides a new platform of low‐cost and color‐saturated blue light‐emitting diodes ideal for display and solid‐state lighting applications. However, numerous established MOFs still exhibit weak deep‐blue‐light emission (<450 nm) owing to low energy/charge transfer efficiency. Here a pressure‐treated strategy to greatly enhance photoluminescence performance of deep‐blue light‐emitting Y(BTC)(H2O)6 (H3BTC: benzene‐1,3,5‐tricarboxylic acid) is reported. Pressure‐treated Y(BTC)(H2O)6 exhibits a bright emission at 409 nm with a photoluminescence quantum yield from the initial 2.8% increasing to 75.0%. The hydrogen bonding cooperativity effect increases hydrogen bond binding energy after pressure treatment and thus the planarization structure is locked. The increased electronic transition diversity and oscillator strength originating from the planarization structure are highly responsible for boosting metal‐to‐ligand charge transfer. The findings in this study provide significant insights into the underlying mechanism of the structure‐property relationship in Y(BTC)(H2O)6 and offer a promising strategy to harvest deep‐blue‐emitting MOFs materials. [ABSTRACT FROM AUTHOR]

Introducing nanostructures into diamonds is quite appealing for the synthesis of superhard materials with superior properties. However, as the grain size decreases to nanoscale, grain boundary effects become crucial yet complicated in the nanopolycrystalline diamond (NPD), making it challenging to tailor nanostructures. Here, atomistic simulations are combined with experiment to demonstrate a strengthening strategy for the sintered NPD by introducing thin amorphous grain boundary (AGB). The additive of small percentage of fullerene into precursors during sintering can significantly reduce crushed amorphous‐like nanodomains in diamond nanocrystals, leading to the formation of thin AGB. Such sintered NPD exhibits a significant hardness and fracture toughness enhancement, exceeding that of single crystal diamonds. These atomistic simulations show that upon straining the plastic deformation, crack initiation and propagation in NPD is AGB thickness dependent, and thin AGB can reduce crack nucleation and block crack propagation, well explaining the experimental observations. This study indicates that grain boundary modulation provides a promising approach for rational designs of high‐performance superhard materials with desired high strength. [ABSTRACT FROM AUTHOR]

This study aimed at developing an effective pregnancy outcome prediction nomogram after surgical anastomosis of the oviduct. This was a retrospective cohort study involving hospitalized women who underwent oviduct anastomosis between January 2008 and January 2019. Socio-demographic and clinical characteristics data of patients were extracted from online records. Univariate and multivariate Cox analyses were performed on selected variables after which multivariate Cox regression analyses used to construct a nomogram for prediction of pregnancy outcomes. C-statistics (C-index) and calibration curves were used to validate the nomogram. A total of 247 women were enrolled in the study. Among them, 67.2% (167 women) had successful live intrauterine pregnancy and 50.6% had at least one live birth. Univariate Cox analysis revealed that patients older than 35 years (HR 0.56; 95% CI 0.41–0.76), post-operative tubal length less than 7 cm (HR 0.36; 95% CI 0.21–0.63), sterilization reversal by laparoscopy (HR 1.38; 95% CI 1.01–1.87), and pelvic environment (HR 0.80; 95% CI 0.68–0.94) were significantly associated with post-surgical intrauterine pregnancy. Based on multivariate Cox analysis, the independent prognostic factors were established to be age > 35 years, post-operative tubal length < 7 cm, sterilization reversal by laparoscopy, and pelvic environment. The constructed predictive model exhibited a good discrimination and predictive ability for intrauterine pregnancy after surgery (C-index 0.74). Sterilization reversal by laparoscopy, post-operative tubal length ≥ 7 cm, age ≤ 35 years, and normal pelvic environment were associated with better pregnancy outcomes after surgical anastomosis of the oviduct. Surgical repair of the fallopian tube partially reverses and restores the anterior natural fertility of women. [ABSTRACT FROM AUTHOR]

Akimotoite, a MgSiO3 polymorph present in the lower transition zone within ultramafic portions of subducting slabs and potentially also in the ambient mantle, will partition some amount of Al, raising the question of how this will affect its crystal structure and properties. In this study, a series of samples along the MgSiO3-Al2O3 (akimotoite-corundum) solid solution have been investigated by means of single-crystal X-ray diffraction to examine their crystal chemistry. Results show a strong nonlinear behavior of the a-and oaxes as a function of Al content, which arises from fundamentally different accommodation mechanisms in the akimotoite and corundum structures. Furthermore, two Al2O3- bearing akimotoite samples were investigated at high pressure to determine the different compression mechanisms associated with Al substitution. Al2O3-bearing akimotoite becomes more compressible at least up to 20 mol% Al2O3, due likely to an increase in compressibility as the Al cation is incorporated into the SiO6 octahedron. This observation is in strong contrast to the stiffer corundum end-member having a KT = 250 GPa, which is larger than that of the akimotoite end-member [KT = 205(1) GPa]. These findings have implications for mineral physics models of elastic properties, which have in the past assumed linear mixing behavior between the MgSiO3 akimotoite and Al2O3 corundum end-members to calculate sound wave velocities for Al-bearing akimotoite at high pressure and temperature. [ABSTRACT FROM AUTHOR]

Lanthanide metal–organic frameworks are of great interest in the development of photoluminescence (PL) materials owing to their structural tunability and intrinsic features of lanthanide elements. However, there exists some limitations arising from poor matching with metal ions, thereby exhibiting a weak ligand‐to‐metal energy transfer (LMET) process. Here we demonstrate a pressure‐treated strategy for achieving high PL performance in green‐emitting Tb(BTC)(H2O)6. The PL quantum yield of pressure‐treated sample increased from 50.6 % to 90.4 %. We found that the enhanced hydrogen bonds locked the conjugated configuration formed by two planes of carboxyl group and benzene ring, enabling the promoted intersystem crossing to effectively drive LMET. Moreover, the optimized singlet and triplet states also validated the facilitated LMET process. This work opens the opportunity of structure optimization to improve PL performance in MOFs by pressure‐treated engineering. [ABSTRACT FROM AUTHOR]

Lanthanide metal–organic frameworks are of great interest in the development of photoluminescence (PL) materials owing to their structural tunability and intrinsic features of lanthanide elements. However, there exists some limitations arising from poor matching with metal ions, thereby exhibiting a weak ligand‐to‐metal energy transfer (LMET) process. Here we demonstrate a pressure‐treated strategy for achieving high PL performance in green‐emitting Tb(BTC)(H2O)6. The PL quantum yield of pressure‐treated sample increased from 50.6 % to 90.4 %. We found that the enhanced hydrogen bonds locked the conjugated configuration formed by two planes of carboxyl group and benzene ring, enabling the promoted intersystem crossing to effectively drive LMET. Moreover, the optimized singlet and triplet states also validated the facilitated LMET process. This work opens the opportunity of structure optimization to improve PL performance in MOFs by pressure‐treated engineering. [ABSTRACT FROM AUTHOR]

(1- x)(0.75(Na 0.5 Bi 0.5)TiO 3 -0.25SrTiO 3)- x NdGaO 3 ceramics (NBST- x NG, x = 0–0.06) were fabricated through a solid-state reaction method. High-valent Nd3+ ions enter the perovskite A-site to occupy Bi vacancies resulting from the volatilization of Bi, inhibiting the formation of oxygen vacancies and contributing to an enhanced breakdown electric field (E b). Low-valent Ga3+ ions enter the B-site to substitute for Ti4+ ions, resulting in the formation of random electric fields (REFs) at the B-site due to co-occupying hetero-valence ions of Ga3+/Ti4+, which significantly reduces ferroelectric hysteresis. Therefore, a synergic effect of A- and B-sites co-doping was realized in NBST- x NG ceramics. Benefitting from this synergic effect, an enhanced recoverable energy storage density (W rec) of 2.88 J/cm3 and an efficiency (η) of 83% are simultaneously obtained in NBST-0.04NG ceramics under a moderate electric field (E) of 200 kV/cm. Compared with most NBT-based ceramics, the values of (η vs W rec / E 2) for NBST-0.04NG ceramics show an obvious advantage, indicating excellent potential for application as an energy storage material. Moreover, W rec and η of NBST-0.04NG ceramics exhibit excellent temperature stability from 30 °C to 200 °C due to the enhanced correlation strength of polar nanoregions (PNRs) and local structural stability. This work provides a potential strategy to improve the energy storage performance of NBT-based ceramics via the synergic effect of A- and B-site co-doping. [ABSTRACT FROM AUTHOR]

Silicate glass has been used as an analog for silicate melts to understand the nature of dense magmas in the Earth's mantle. To understand the effect of Al2O3 on the sound velocity and structure of MgSiO3 glass, in this study, combined with Brillouin scattering and diamond anvil cells (DACs), the acoustic velocity of MgSiO3∙5 mol%Al2O3 (MA1) and MgSiO3∙24.5 mol%Al2O3 (MA2) glass were measured up to 20 and 42 GPa, respectively. Our studies show that the incorporation of Al2O3 could increase the sound velocity of MgSiO3 glass. Using the obtained velocities, the bulk and shear moduli (KS, G), density (ρ) and Poisson's ratio (ν) are calculated at high pressures, and the results indicate that Al2O3 could induce the stiffness of MgSiO3 glass. However, the effect of Al2O3 content on the stiffness of MgSiO3 glass is non-linear, and MA1 and MA2 exhibit similar KS and G at high pressures. With the increase of pressure, the transverse acoustic mode (VS) of MA1 and MA2 shows abnormal changes at 17.8 GPa and 31.8 GPa, which are related to the transition of coordination number (CN) for Si-O in Al-bearing MgSiO3 glass. Compared with previous studies on sound velocity of MgSiO3 glass, the incorporation of Al2O3 delays the transition pressure of Si-O coordination to a higher pressure. Our study has profound implications for understanding the density and sound velocity of Al-bearing MgSiO3 melt in the Earth's interior. [ABSTRACT FROM AUTHOR]

Penetrating, high‐energy synchrotron X‐rays are in strong demand, particularly for high‐pressure research in physics, chemistry and geosciences, and for materials engineering research under less extreme conditions. A new high‐energy wiggler beamline P61 has been constructed to meet this need at PETRA III in Hamburg, Germany. The first part of the paper offers an overview of the beamline front‐end components and beam characteristics. The second part describes the performance of the instrumentation and the latest developments at the P61B endstation. Particular attention is given to the unprecedented high‐energy photon flux delivered by the ten wigglers of the PETRA III storage ring and the challenges faced in harnessing this amount of flux and heat load in the beam. Furthermore, the distinctiveness of the world's first six‐ram Hall‐type large‐volume press, Aster‐15, at a synchrotron facility is described for research with synchrotron X‐rays. Additionally, detection schemes, experimental strategies and preliminary data acquired using energy‐dispersive X‐ray diffraction and radiography techniques are presented. [ABSTRACT FROM AUTHOR]

Low visibility event, as a disastrous weather, has great impacts on traffic and transportation, aircraft, and people's daily life, etc. Timely and accurate forecasts of low visibility events are urgently needed and meaningful. The reasonable algorithm of atmospheric extinction in atmospheric chemistry models is the basis for quantitatively predicting low visibility. The revised IMPROVE algorithm (RIMP) of atmospheric extinction is incorporated into the chemistry-weather interacted model GRAPES_Meso5.1/CUACE CW V1 to improve the prediction of low visibility events (LVEs) in the urban agglomerations in eastern China, which is compared with the original IMPROVE algorithm (OIMP) used in this model. The study results show that the RIMP effectively reduces the overestimation of low visibility prediction by OIMP in general, leading to a decrease of root-mean-square errors (RMSEs) and an increase of Threat Score (TS) of visibility <3 km, 5 km, and 10 km overall both at regional and city scales in varying degrees due to its more detailed processing of aerosols' size, optical feature and hygroscopic growth; The improvements of visibility prediction of LVEs by RIMP depends on the combined contribution of high relative humidity (RH) and PM 2.5 instead of single high RH or PM 2.5. The relative contributions of RH and PM 2.5 concentration on different levels of low visibility are different in Beijing-Tianjin-Hebei (BTH) and Yangtze River Delta (YRD) regions due to their different RH and PM 2.5 , which leads to the different improvement of RIMP in the two regions. The larger improvements by RIMP occur for visibility <5 km in BTH, while in YRD, the larger improvements by RIMP occur for visibility <10 km and >5 km. Moreover, the improvements by RIMP were more evident with higher RH conditions in both regions. The uncertainty created by the extinction algorithm is one important factor of the multiple factors affecting LVEs prediction; accurate modeling of high RH near saturation is also very important for LVEs prediction. • The revised IMPROVE (RIMP) algorithm is applicated to the atmospheric chemistry model to improve low visibility prediction. • RIMP generally improves low visibility prediction than the original IMPROVE algorithm (OIMP). • The improvements in low visibility prediction by RIMP vary depending on different aerosol and humidity conditions. [ABSTRACT FROM AUTHOR]

Compared with climate models, the role of aerosol-cloud interaction (ACI) in mesoscale numerical weather prediction (NWP) models still needs to be better understood, especially in haze regions with relatively high aerosol concentration. Here, we perform two sensitivity experiments with and without ACI (ACI and NO-ACI) in the atmospheric chemistry model GRAPES_Meso5.1/CUACE to investigate the impact of ACI on mesoscale NWP during the low-cloud period in winter 2016 over varying haze regions (severe polluted Jing-Jin-Ji (JJJ), polluted Yangtze River Delta (YRD), and weak polluted Pearl River Delta (PRD)) in China. The study results show that the real-time ACI improves underestimated cloud optical thickness (COT) and cloud water liquid path (CLWP) in haze regions, with the mean bias of simulated COT (CLWP) decreased by 27% (3%), 60% (14%), and 55% (3%) in JJJ, YRD, and PRD, respectively. The increased COT and CLWP lead to a decrease of 6.8, 21, and 13 W m−2 in daytime surface downward shortwave radiation (SDSR) in JJJ, YRD, and PRD, helping to reduce the mean bias of daytime SDSR by 6%, 13%, and 9%. In addition, ACI mitigates the warm bias of temperature at 2 m and dry bias of relative humidity (RH) at 2 m to a certain extent in haze regions, particularly in YRD with the mean absolute bias improved by 13% and 6%. The simulated vertical structure of temperature and RH in the ACI experiment is more consistent with observations than in the NO-ACI experiment. Further investigations find that the ACI effects on mesoscale NWP strongly depend on COT and CLWP magnitude over varying haze regions. Higher COT and CLWP, hence more significant meteorology changes due to ACI, occur in YRD, followed by PRD and JJJ. This study demonstrates the importance and complexity of ACI in modifying mesoscale NWP over varying haze regions of China, which promotes the further understanding of ACI in operational NWP models and bridges the gap with climate models. •ACI increases COT and CLWP when low-cloud and haze coexist. • ACI further leads to decreased SDSR, lower temperature, and higher RH. • ACI-induced changes improve mesoscale NWP to a certain extent. • The ACI effects on mesoscale NWP strongly depend on COT and CLWP magnitude. [ABSTRACT FROM AUTHOR]

(1-x)(0.75Na0.5Bi0.5TiO3-0.25SrTiO3)-xErBiO3 (NBST-xEB, x = 0–0.04) ceramics were fabricated through a solid state reaction method. Scanning electron microscopy investigation shows that grain size of the ceramics decreases with increasing x. X-ray diffraction results reveal that all the ceramics are pseudocubic phase. An enhanced disordering of local structure by EB doping is revealed by Raman spectra. The NBST-xEB ceramics exhibit excellent dielectric stability within a wide temperature range after EB doping. A relatively high recoverable energy storage density (Wrec) of 1.834 J/cm3 with efficiency (η) of 71% are obtained for NBST-0.02 EB ceramics under a moderate electric field of 148 kV/cm. The Wrec and η of the NBST-0.02 EB ceramics exhibit excellent fatigue stability (104) and temperature stability (Wrec > 0.834 J/cm3, η > 64%) within 30–200 °C under 100 kV/cm. With the introduction of EB, the NBST-xEB ceramics also show strong photoluminescence properties due to the presence of Er3+. [ABSTRACT FROM AUTHOR]

The thermal effect of the Tibetan Plateau (TP) on the northern hemisphere climate has long been a hot topic of scientific research. However, the global effects of the TP heat source are still unclear. We investigate the teleconnection patterns coincident with the TP heat source in boreal summer using both observational data and numerical models including a linearized baroclinic model and an atmospheric general circulation model. The western TP shows the most intense variability in atmospheric heating and the most active connection to atmospheric circulations. The surface sensible heating component of the western TP heat source is associated with a high-latitude wave train propagating from North Japan to central North America through the Bering Sea and Canada. The radiative heating component is accompanied by a wavenumber-4 wave train over Eurasia. We focus on the global zonally-oriented pattern that is connected with the latent heat release from the western TP, referred to here as the TP–circumglobal teleconnection (TP-CGT). The TP-CGT pattern is triggered by the western TP latent heating in two parts starting from the TP: an eastward-propagating wave train trapped in the westerly jet stream and a westward Rossby wave response. The TP-CGT accounts for above 18% of the total variance of the circumglobal teleconnection pattern and modulates mid-latitude precipitation by superimposition. The western TP is the key region in which diabatic heating can initiate the two atmospheric responses concurrently, and the heating over northeastern Asia or the Indian Peninsula is unable to induce the circumglobal pattern directly. The unique geographical location and strong tropospheric heating also make the western TP as a "transit area" of transferring the indirect impact of the Indian summer monsoon (ISM) to the TP-CGT. These results enhance our understanding of the relationship between the circumglobal teleconnection and the ISM and is helpful for improving the prediction of the circumglobal teleconnection variability. [ABSTRACT FROM AUTHOR]

Background: Fetal growth velocity standards have yet to be established for the Chinese population. This study aimed to establish such standards suitable for the Chinese population.Methods: We performed a multicenter, population-based longitudinal cohort study including 9075 low-risk singleton pregnant women. Data were collected from the clinical records of 24 hospitals in 18 provinces of China. Demographic characteristics, reproductive history, fetal ultrasound measurements, and perinatal outcome data were collected. The fetal ultrasound measurements included biparietal diameter (BPD), abdominal circumference (AC), head circumference (HC), and femur diaphysis length (FDL). We used linear mixed models with cubic splines to model the trajectory of four ultrasound parameters and estimate fetal weight. Fetal growth velocity was determined by calculating the first derivative of fetal size curves. We also used logistic regression to estimate the association between fetal growth velocities in the bottom 10th percentile and adverse perinatal outcomes.Results: Fetal growth velocity was not consistent over time or among individuals. The estimated fetal weight (EFW) steadily increased beginning at 12 gestational weeks and peaked at 35 gestational weeks. The maximum velocity was 211.71 g/week, and there was a steady decrease in velocity from 35 to 40 gestational weeks. The four ultrasound measurements increased in the early second trimester; BPD and HC peaked at 13 gestational weeks, AC at 14 gestational weeks, and FDL at 15 gestational weeks. BPD and HC also increased from 19 to 24 and 19 to 21 gestational weeks, respectively. EFW velocity in the bottom 10th percentile indicated higher risks of neonatal complications (odds ratio [OR] = 2.23, 95% confidence interval [CI]: 1.79-2.78) and preterm birth < 37 weeks (OR = 3.68, 95% CI: 2.64-5.14). Sensitivity analyses showed that EFW velocity in the bottom 10th percentile was significantly associated with more adverse pregnancy outcomes for appropriate-for-gestational age neonates.Conclusions: We established fetal growth velocity curves for the Chinese population based on real-world clinical data. Our findings demonstrated that Chinese fetal growth patterns are somewhat different from those of other populations. Fetal growth velocity could provide more information to understand the risk of adverse perinatal outcomes, especially for appropriate-for-gestational age neonates. [ABSTRACT FROM AUTHOR]

Monoubiquitination of FANCD2 is a central step in the activation of the Fanconi anemia (FA) pathway after DNA damage. Defects in the FA pathway centered around FANCD2 not only lead to genomic instability but also induce tumorigenesis. At present, few studies have investigated FANCD2 in tumors, and no pan-cancer research on FANCD2 has been conducted. We conducted a comprehensive analysis of the role of FANCD2 in cancer using public databases and other published studies. Moreover, we evaluated the role of FANCD2 in the proliferation, migration and invasion of lung adenocarcinoma cells through in vitro and in vivo experiments, and explored the role of FANCD2 in cisplatin chemoresistance. We investigated the regulatory effect of FANCD2 on the cell cycle of lung adenocarcinoma cells by flow cytometry, and verified this effect by western blotting. FANCD2 expression is elevated in most TCGA tumors and shows a strong positive correlation with poor prognosis in tumor patients. In addition, FANCD2 expression shows strong correlations with immune infiltration, immune checkpoints, the tumor mutation burden (TMB), and microsatellite instability (MSI), which are immune-related features, suggesting that it may be a potential target of tumor immunotherapy. We further found that FANCD2 significantly promotes the proliferation, invasion, and migration abilities of lung adenocarcinoma cells and that its ability to promote cancer cell proliferation may be achieved by modulating the cell cycle. The findings indicate that FANCD2 is a potential biomarker and therapeutic target in cancer treatment by analyzing the oncogenic role of FANCD2 in different tumors. • This study provides the first pan-cancer analysis of FANCD2 using data from public databases. • FANCD2 is upregulated and has poor prognosis in most cancers and plays a potential role in regulating tumor immunity. • We further validated FANCD2 as an important oncogenic gene and promotes tumor progression by regulating cell cycle. [ABSTRACT FROM AUTHOR]

The aerosol-radiation interaction mechanism (ARI) is important for air quality modeling, and its absence in atmospheric chemistry models may cause considerable uncertainties. In this study, the real-time calculated aerosol optical parameters, i.e., mass extinction coefficient (K ext), single scattering albedo (ω), and asymmetry factor (g) from the simulated aerosol concentrations are introduced into the Global/Regional Assimilation and Prediction System 5.1 version coupled with the Chinese Unified Atmospheric Chemistry Environment model (GRAPES_Meso5.1/CUACE) to establish the ARI mechanism for the two-way feedback between aerosols and weather processes. Focusing on Beijing-Tianjin-Hebei (BTH), China, in January 2017, ARI impacts on meteorology and haze-fog are simulated by using this atmospheric chemistry model. The results show that during the severe pollution, ARI can significantly alter the meteorology, especially for the heavily polluted central and southern BTH: The surface solar radiation (SSR), the temperature at 2 m (T2), the vertical diffusion coefficient (VDC), and the planetary boundary layer height (PBLH) are reduced by up to 50 W m−2, 2.5°C, 4 m2 s−1, and 100 m, respectively. In addition to surface meteorology, ARI affects the vertical structure of the planetary boundary layer (PBL), by cooling and humidifying the lower air and heating and drying the higher air. These modifications stabilize the PBL, resulting in an increase of 8% in relative humidity at 2 m (RH2), a key factor influencing secondary aerosol generation and aerosol hygroscopic growth. Stabilized PBL and increased RH2 ultimately result in a 100 μg m−3 increase in PM 2.5 concentrations and a 1.5 km reduction in atmospheric visibility (VIS). By considering the ARI, the model generally improves numerical weather prediction (NWP) and haze-fog prediction. For the entire BTH region, the mean biases for T2 and RH2 are reduced by up to 2°C and 4% respectively. This more accurate NWP will lead to an overall improvement in haze-fog prediction, particularly in a heavily polluted city like Shijiazhuang (SJZ), the biases for PM 2.5 and VIS are reduced by 28% and 125% respectively. The results show the positive feedback between meteorology and haze-fog, and demonstrate the importance of ARI in NWP and haze-fog prediction. • Aerosol-radiation interaction (ARI) has a critical influence on the outbreak of severe haze-fog. • The ARI mechanism is achieved in GRAPES_Meso5.1/CUACE. • The two-way coupled model considering ARI significantly improves the prediction of both meteorology and haze-fog. [ABSTRACT FROM AUTHOR]

GLO:44U/25nov22:anie202215826-toc-0001.jpg PHOTO (COLOR): . gl GLO:44U/25nov22:anie202215826-toc-0001.jpg PHOTO (COLOR): . gl B A pressure-treatment strategy b for achieving high photoluminescence performance in a green-emitting Tb-based metal-organic framework is reported by Xinyi Yang, Qianrong Fang, Banglin Chen, Bo Zou et al. in their Research Article (e202210836). Fluorescent Monochromaticity, Green Photoluminescence Enhancement, Lanthanide Metal-Organic Frameworks, Ligand-to-Metal Energy Transfer, Pressure-Treated Engineering Cover Picture: Maximized Green Photoluminescence in Tb-Based Metal-Organic Framework via Pressure-Treated Engineering (Angew. [Extracted from the article]

Keywords: Fluorescent Monochromaticity; Green Photoluminescence Enhancement; Lanthanide Metal-Organic Frameworks; Ligand-to-Metal Energy Transfer; Pressure-Treated Engineering EN Fluorescent Monochromaticity Green Photoluminescence Enhancement Lanthanide Metal-Organic Frameworks Ligand-to-Metal Energy Transfer Pressure-Treated Engineering 1 1 1 11/22/22 20221125 NES 221125 B Die Photolumineszenzausbeute b in einem grün-emittierenden metallorganischen Gerüst auf Tb-Basis lässt sich mittels Druckbehandlung steigern, wie Xinyi Yang, Qianrong Fang, Banglin Chen, Bo Zou und Mitarbeiter in ihrem Forschungsartikel berichten (e202210836). Die verstärkten Wasserstoffbrücken verriegeln die konjugierte Konfiguration und ermöglichen Intersystem-Crossing, was den Metall-zu-Ligand-Energietransfer beschleunigt. Fluorescent Monochromaticity, Green Photoluminescence Enhancement, Lanthanide Metal-Organic Frameworks, Ligand-to-Metal Energy Transfer, Pressure-Treated Engineering. [Extracted from the article]

Concerning the practical applications, dielectric capacitors with simultaneously high recoverable energy density (W rec) and large energy storage efficiency (η) under a low electric field is imperative and challenging. Herein, a strategy of complex ions substitution is proposed to achieve the goal. The (1- x)(0.75Na 0.5 Bi 0.5 TiO 3 -0.25SrTiO 3)- x La(Mg 2/3 Ta 1/3)O 3 (NBST- x LMT) ceramics were fabricated through a solid-state reaction method. A significantly enhanced breakdown electric field (E b) of 246.03 kV/cm is obtained in NBST-0.06LMT ceramics due to the refined average grain size (AGS), the enhanced band gap width and the inhibited oxygen vacancies by LMT doping. Furthermore, a high W rec of 3.18 J/cm3and large η of 86% are concurrently achieved in NBST-0.06LMT ceramics under a relatively low electric field of 246 kV/cm. Meanwhile, the variations of (W rec , η) under 170 kV/cm are less than 10% from 30 ℃ to 200 ℃, indicating an excellent thermal stability. Besides, the ceramics show a fast discharge rate of 155 ns by a charge-discharge measuring. In general, our results demonstrate the strategy of complex ions substitution is an effective way to achieve high energy storage performance under a relatively low electric field in NBT-based ceramics. [Display omitted] • Complex ions (La3+, Mg2+ and Ta5+) substitution was proposed to achieve high energy storage performance. • An enhanced Eb (246.03 kV/cm) was realized in NBST ceramics. • A high Wrec of 3.18 J/cm3and large η of 86% were concurrently obtained under 246 kV/cm. • The (Wrec, η) exhibits excellent thermal stability from 30 ℃ to 200 ℃. [ABSTRACT FROM AUTHOR]

Emissions and meteorology are significant factors affecting aerosol pollution, but it is not sufficient to understand their relative contributions to aerosol pollution changes. In this study, the observational data and the chemical model (GRAPES_CUACE) are combined to estimate the drivers of PM2.5 changes in various regions (the Beijing–Tianjin–Hebei (BTH), the Central China (CC), the Yangtze River Delta (YRD), and the Pearl River Delta (PRD)) between the first month after COVID-19 (FMC_2020) (i.e., from 23 January to 23 February 2020) and the corresponding period in 2019 (FMC_2019). The results show that PM2.5 mass concentration increased by 26% (from 61 to 77 µg m−3) in the BTH, while it decreased by 26% (from 94 to 70 µg m−3) in the CC, 29% (from 52 to 37 µg m−3) in the YRD, and 32% (from 34 to 23 µg m−3) in the PRD in FMC_2020 comparing with FMC_2019, respectively. In the BTH, although emissions reductions partly improved PM2.5 pollution (−5%, i.e., PM2.5 mass concentration decreased by 5% due to emissions) in FMC_2020 compared with that of FMC_2019, the total increase in PM2.5 mass concentration was dominated by more unfavorable meteorological conditions (+31%, i.e., PM2.5 mass concentration increased by 31% due to meteorology). In the CC and the YRD, emissions reductions (−33 and −36%) played a dominating role in the total decrease in PM2.5 in FMC_2020, while the changed meteorological conditions partly worsened PM2.5 pollution (+7 and +7%). In the PRD, emissions reductions (−23%) and more favorable meteorological conditions (−9%) led to a total decrease in PM2.5 mass concentration. This study reminds us that the uncertainties of relative contributions of meteorological conditions and emissions on PM2.5 changes in various regions are large, which is conducive to policymaking scientifically in China. [ABSTRACT FROM AUTHOR]

Forest soil acidification caused by acid deposition is a serious threat to the forest ecosystem. To investigate the liming effects of biomass ash (BA) and alkaline slag (AS) on the acidic topsoil and subsoil, a three-year field experiment under artificial Masson pine was conducted at Langxi, Anhui province in Southern China. The surface application of BA and AS significantly increased the soil pH, and thus decreased exchangeable acidity and active Al in the topsoil. Soil exchangeable Ca2+ and Mg2+ in topsoil were significantly increased by the surface application of BA and AS, while an increase in soil exchangeable K+ was only observed in BA treatments. The soil acidity and active Al in subsoil were decreased by the surface application of AS. Compared with the control, soluble monomeric and exchangeable Al in the subsoil was decreased by 38.0% and 29.4% after 3 years of AS surface application. There was a minimal effect on soluble monomeric and exchangeable Al after the application of BA. The soil exchangeable Ca2+ and Mg2+ in the subsoil increased respectively by 54% and 141% after surface application of 10 t ha−1 AS. The decrease of soil active Al and increase of base cations in subsoil were mainly attributed to the high migration capacity of base cations in AS. In conclusion, the effect of surface application of AS was superior to BA in ameliorating soil acidity and alleviating soil Al toxicity in the subsoil of this Ultisol. [Display omitted] • Biomass ash (BA) and alkaline slag (AS) effectively amended the topsoil acidity. • BA surface application increased soil exchangeable K+ in both topsoil and subsoil. • The acidity and active Al in subsoil were reduced by surface application of AS. • High mobility of Ca and Mg in AS contributed to the reduced active Al in subsoil. [ABSTRACT FROM AUTHOR]