Search

This paper proposes a novel approach for fast human exposure absorbed power density assessment, based on a combination of over-the-air radiative field measurements and full-wave electromagnetic simulations. This so-called augmented OTA technique relies on the computation of an equivalent source or digital twin, which reproduces the radiation properties of the device under test. At short separation distances, the interaction between the human model and the device is however not negligible. A novel solution to model the influence of multiple reflections is introduced, where the inside of the equivalent source box is partially filled with a perfect electric conductor, thereby creating a reflective digital twin model. Simulation and measurement results demonstrate the relevance of this technique for enabling accurate absorbed power density evaluations. A discussion on aspects influencing the measurement time and uncertainty is also provided, where a new demonstration is delivered how spatial-averaging contributes positively to the accuracy of the method.

This study investigates the influence of cobalt (Co) alloying addition and heat treatment temperature on the phase transformation behaviour controlling the superelasticity and shape memory effect (SME) of Nickel-Titanium (Ni-Ti) alloys, commonly known as nitinol. The microstructural evolution upon heat treatment conducted at a temperature ranging from 440 to 560 °C was thoroughly analyzed via Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), and Scanning Electron Microscopy/Energy Dispersive Spectroscopy (SEM/EDS). Increase in heat treatment temperatures from 470 °C up to 530 °C led to the dissolution of particles present in as-received (cold-worked) condition. It was determined that Co addition into the Ni-Ti alloy system resulted in a change in the nucleation and growth kinetics of Ti-rich precipitates, leading to the formation of larger and fewer particles during processing. Both binary and ternary alloys showed a decrease in austenite finish temperature (Af) with increasing heat treatment temperatures, however, the rate of decrease was found to be higher for Co containing ternary alloys. This is linked with faster structural relaxation when Co is present and evidenced by lattice size variation during heat treatment. It is highlighted that heat treatment methodology needs to be tailored to the specific alloy composition for controlling superelasticity and SME via alloy design.

To maximize the benefits of wire arc additive manufacturing (WAAM) processes, the effect of post-deposition heat treatment on the microstructure and mechanical properties of WAAM AZ80M magnesium (Mg) alloy was investigated. Three different heat treatment procedures (T4, T5 and T6) were performed. According to the results, after T4 heat treatment, the microsegregation of alloying elements was improved with the eutectic structure dissolved. Samples after T5 heat treatment inherited the net-like distribution of secondary phases similar to the as-deposited sample, where the eutectic structure covering the interdendritic regions and the β-phase precipitated around the eutectic structure. After T6 heat treatment, the tiny β-phases re-precipitated from the matrix and distributed in inner and outer of the grains. The hardness distribution of the samples went through T4 and T6 heat treatment was more uniform in comparison to that of T5 heat treated samples. The tensile test showed that the T6 heat treatment improved the strength and ductility, and the anisotropy between horizontal and vertical can be eliminated. Moreover, T4 treated samples exhibited highest ductility.

Magnesium alloys can be used in a wide range of applications, from lightweight structural and transport applications to biomaterials [...]

This article presents cyclic hardening/softening behaviors (experimental data) of the heat-treated aluminum-matrix nano-clay-composite (AlSi_N_HT6), compared to those of the piston aluminum alloy (AlSi) under strain-controlled loading. For such an objective, standard samples were fabricated by gravity and stir-casting methods. Low-cycle fatigue experiments were carried out under different strain amplitudes (0.20–0.45%) and at various temperatures (25–300°C). Obtained results implied that no obvious change was observed on material properties of aluminum alloy by reinforcements, but a decrement was observed due to increasing the temperature. Results also indicated that the increase of the temperature from 25°C to 200°C has changed the cyclic behavior of both materials (AlSi_N_HT6 and AlSi) from hardening to softening. Moreover, the temperature effect was more significant than the total strain amplitude influences in cyclic behaviors.

Digital image correlation (DIC) techniques were used to evaluate strain distributions along tensile gage lengths immediately after yielding of a medium manganese steel (7 wt% Mn) in samples cold rolled in the range of 1–6 pct. With an increase in cold work, DIC confirmed that the yielding behavior transitioned from nucleation and propagation of a single localized deformation zone (Lüders band) to uniform deformation, that is, no evidence of strain localization. At intermediate amounts of cold work, a unique yielding behavior was evident where the initially-low positive strain hardening rate increased with tensile strain until conventional strain hardening (i.e., decrease in strain hardening rate with strain). The intermediate yielding behavior was associated with the development of multiple non‑propagating regions of strain localization, an observation not previously evident without the use of DIC.