Search

The LCOE is a strong techno-economic analysis based on performance, stability, and manufacturing costs to evaluate the potential of perovskites in the solar market. Here, we reported an estimation of perovskites’ LCOE between 4–6 cents (USD) per kWh.

Utilizing four-dimensional scanning ultrafast electron microscopy (4D-SUEM) is a powerful tool to monitor charge dynamics at material surfaces and interfaces especially for the application in renewable energy field. Herein, we uncover unique physical features for 4D-SUEM upon reducing the acceleration of probed primary electrons to 1 keV, for wide range of materials including various single crystals, thin films and quantum dots upon the presence of oxidized and neat surfaces. Working at 1 keV helps to uncover the migration of photogenerated carriers originating from both sub-surface and bulk layers, under the influence of the carriers scattering and the band-bending phenomena. This approach provides a new avenue for the spatial and temporal access to the surface exclusive dynamics in renewable energy materials to unlock their interfacial behaviors at the nanoscale level.

If perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs) are to be commercialized, they must achieve long-term stability, which is usually assessed with accelerated degradation tests. One of the persistent obstacles for PSCs has been successfully passing the damp-heat test (85°C and 85% relative humidity), which is the standard for verifying the stability of commercial photovoltaic (PV) modules. We fabricated damp heat–stable PSCs by tailoring the dimensional fragments of two-dimensional perovskite layers formed at room temperature with oleylammonium iodide molecules; these layers passivate the perovskite surface at the electron-selective contact. The resulting inverted PSCs deliver a 24.3% PCE and retain >95% of their initial value after >1000 hours at damp-heat test conditions, thereby meeting one of the critical industrial stability standards for PV modules.

High-efficiency perovskite-based solar cells comprise sophisticated stacks of materials which, however, often feature different thermal expansion coefficients and are only weakly bonded at their interfaces. This may raise concerns over delamination in such devices, jeopardizing their long-term stability and commercial viability. Here, we investigate the root causes of catastrophic top-contact delamination we observed in state-of-the-art p-i-n perovskite/silicon tandem solar cells. By combining macroscopic and microscopic analyses, we identify the interface between the fullerene electron transport layer and the tin oxide buffer layer at the origin of such delamination. Specifically, we find that the perovskite morphology and its roughness play a significant role in the microscopic adhesion of the top layers, as well as the film processing conditions, particularly the deposition temperature and the sputtering power. Our findings mandate the search for new interfacial linking strategies to enable mechanically strong perovskite-based solar cells, as required for commercialization.

Improving the perovskite/electron-transporting layer (ETL) interface is a crucial task to boost the performance of perovskite solar cells (PSCs).

Advanced functional materials 33(4), 2205557 (2023). doi:10.1002/adfm.202205557, Textured silicon wafers used in silicon solar cell manufacturing offer superior light trapping, which is a critical enabler for high-performance photovoltaics. A similar optical benefit can be obtained in monolithic perovskite/silicon tandem solar cells, enhancing the current output of the silicon bottom cell. Yet, such complex silicon surfaces may affect the structural and optoelectronic properties of the overlying perovskite films. Here, through extensive characterization based on optical and microstructural spectroscopy, it is found that the main effect of such substrate morphology lies in an altering of the photoluminescence response of the perovskite, which is associated with thickness variations of the perovskite, rather than lattice strain or compositional changes. With this understanding, the design of high-performance perovskite/silicon tandems is rationalized, yielding certified power conversion efficiencies of >28%., Published by Wiley-VCH, Weinheim

We applied an organic sensor for the detection and quantification of PbI2 released by perovskite solar cells. The molecule shows a fluorescence intensity enhancement in the presence of Pb2+ cations and is highly selective of the desired analyte.

Summary Stacking perovskite solar cells onto crystalline silicon bottom cells in a monolithic tandem configuration enables power-conversion efficiencies (PCEs) well above those of their single-junction counterparts. However, state-of-the-art wide-band-gap perovskite films suffer from phase stability issues. Here, we show how carbazole as an additive to the perovskite precursor solution can not only reduce nonradiative recombination losses but, perhaps more importantly, also can suppress phase segregation under exposure to moisture and light illumination. This enables a stabilized PCE of 28.6% (independently certified at 28.2%) for a monolithic perovskite/silicon tandem solar cell over ∼1 cm2 and 27.1% over 3.8 cm2, built from a textured silicon heterojunction solar cell. The modified tandem devices retain ∼93% of their performance over 43 days in a hot and humid outdoor environment of almost 100% relative humidity over 250 h under continuous 1-sun illumination and about 87% during a 85/85 damp-heat test for 500 h, demonstrating the improved phase stability.

The performance of perovskite solar cells with inverted polarity (p-i-n) is still limited by recombination at their electron extraction interface, which also lowers the power conversion efficiency (PCE) of p-i-n perovskite-silicon tandem solar cells. A MgF x interlayer with thickness of ~1 nanometer at the perovskite/C 60 interface favorably adjusts the surface energy of the perovskite layer through thermal evaporation, which facilitates efficient electron extraction and displaces C 60 from the perovskite surface to mitigate nonradiative recombination. These effects enable a champion open-circuit voltage of 1.92 volts, an improved fill factor of 80.7%, and an independently certified stabilized PCE of 29.3% for a monolithic perovskite-silicon tandem solar cell ~1 square centimeter in area. The tandem retained ~95% of its initial performance after damp-heat testing (85°C at 85% relative humidity) for >1000 hours.

Co-evaporated perovskite solar cells have shown outstanding scalability, intrinsic stability, high efficiency and adaptability on rough surfaces. Here we present an optimal hybrid method to wide the co-evaporated MAPbI3's bandgap by a MABr treatment.