Search

Nano-/microplastics (NMPs, particle diameter5 mm) are widespread emerging pollutants causing diverse impacts on organisms due to their sizes, shapes, and chemical properties. Despite the fast increase in NMP research, an effective method to separate and identify NMP types from environmental samples is still lacking. Here, we developed a simple and effective approach for the non-destructive extraction and separation of various types of NMPs from environmental samples by density gradient ultracentrifugation (DGU). For the first time, DGU was capable to separate various NMPs from the complex matrix with high selectivity (100%), purity (93%), and applicability. Through a gradually changing density of the density gradient medium by changing the concentrations or volumes of CsCl/water solution (from 0.00065 to 0.01989 g cm

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe

In this study, an aerosol-assisted Fe

The black soldier fly (BSF), Hermetia illucens, has emerged as a promising species for waste bioconversion and source of antimicrobial proteins (AMPs). However, there is a scarcity of research on the element transformation efficiency and molecular characterization of AMPs derived from waste management. Here, food waste treatment was performed using BSF larvae (BSFL) in a C/N ratio of 21:1–10:1, with a focus on the C/N-dependent element bioconversion, AMP antimicrobial activity, and transcriptome profiling. The C-larvae transformation rates were found to be similar among C/Ns (27.0–35.5%, p = 0.109), while the N-larvae rates were different (p = 0.001), with C/N 21:1–16:1 (63.5–75.0%) being higher than C/N 14:1–10:1 (35.0–45.7%). The C/N ratio did not alter the antimicrobial spectrum of AMPs, but did affect the activities, with C/N 21:1 being significantly lower than C/N 18:1–10:1. The lysozyme genes were found to be significantly more highly expressed than the cecropin, defensin, and attacin genes in the AMP gene family. Out of 51 lysozyme genes, C/N 18:1 and C/N 16:1 up-regulated (p < 0.05) 14 and 12 genes compared with C/N 21:1, respectively, corresponding to the higher activity of AMPs. Overall, the element bioconversion efficiency and AMP expression can be enhanced through C/N ratio manipulation, and the C/N-dependent transcriptome regulation is the driving force of the AMP difference.

Microplastics (MPs) are ubiquitous in wastewater treatment plants (WWTPs), but much remains to be learned about their roles in WWTPs. Herein, polyethylene terephthalate (PET) and polyethylene (PE) particles were added into sequencing batch reactors (SBRs), and the sole impacts and co-impacts of MPs with other pollutants (phenol and Cu2+) on wastewater treatment processes were evaluated. Results indicated that MPs did not significantly affect SBR performance, either alone or co-occurrence with phenol, but the co-exposure to MPs and Cu2+ severely suppressed COD removal efficiency by 37.02%-64.70%. The functional groups of activated sludge had no changes after receiving MPs, but the MPs-Cu2+ co-exposure could greatly promote the secretion of extracellular polymeric substances. Furthermore, MPs had no negative impacts on diversity, richness and structure of bacterial communities, and PET and PE showed different preferences for enrichment of bacterial populations. Moreover, the MPs-Cu2+ co-exposure obviously reduced the overall abundances of Cu-related genes in SBRs.