Search

Microalgal biomass is an excellent platform for producing food, feed, nutraceuticals, pharmaceuticals, and biofuels. This study aimed to investigate the effect of the trophic mode of cultivation (phototrophic, heterotrophic, and mixotrophic) on the growth and biomass composition of Chlorella vulgaris S2. The contents of lipids and carbohydrates, as well as the fatty acid composition of total lipids, were studied. The effects of the carbon-to-nitrogen ratio (C:N) and the organic carbon concentration of the growth media under mixotrophic and heterotrophic conditions were also investigated. The C:N ratio of 30 mol mol−1 favoured lipid synthesis, and the C:N ratio of 10 mol mol−1 favoured carbohydrate synthesis. Maximal lipid and biomass productivities (2.238 and 0.458 g L−1 d−1, respectively) were obtained under mixotrophic conditions at the C:N ratio of 50 mol mol−1 and glucose concentration of 50 g L−1. Fed-batch cultivation conducted in a stirrer tank bioreactor under heterotrophic growth conditions increased biomass (2.385 g L−1 d−1, respectively) and lipid (0.339 L−1 d−1) productivities ~50 and ~60 times compared to the fed-batch phototrophic cultivation, respectively. The trophic mode, growth phase, and growth medium composition significantly influenced the fatty acid composition. Under mixotrophic and heterotrophic growth conditions, lipid accumulation is associated with an increase in oleic acid (C18:1) content. Mixotrophically grown biomass of Chlorella vulgaris S2 under optimised conditions is a suitable source of lipids for biodiesel production.

The growing commercial application of microalgae in different industry sectors, including the production of bioenergy, pharmaceuticals, nutraceuticals, chemicals, feed, and food, demands large quantities of microalgal biomass with specific compositions produced at reasonable prices. Extensive studies have been carried out on the design of new and improvement of current cultivation systems and the optimisation of growth medium composition for high productivity of microalgal biomass. In this study, the concentrations of the main macronutrients, silicon, nitrogen and phosphorus, essential for the growth of diatom Nitzschia sp. S5 were optimised to obtain a high biomass concentration. The effect of main macronutrients on growth kinetics and cell composition was also studied. Silicon had the most significant effect on diatom growth during batch cultivation. The concentration of biomass increased 5.45-fold (0.49 g L−1) at 1 mM silicon concentration in modified growth medium compared to the original Guillard f/2 medium. Optimisation of silicon, nitrogen, and phosphorus quantities and ratios further increased biomass concentration. The molar ratio of Si:N:P = 7:23:1 mol:mol:mol yielded the highest biomass concentration of 0.73 g L−1. Finally, the fed-batch diatom cultivation of diatom using an optimised Guillard f/2 growth medium with four additions of concentrated macronutrient solution resulted in 1.63 g L−1 of microalgal biomass. The proteins were the most abundant macromolecules in microalgal biomass, with a lower content of carbohydrates and lipids under all studied conditions.

Bioethanol is the most widely used alternative transportation fuel to petrol. Bioethanol is considered a clean, renewable, and environmentally friendly fuel that can contribute to climate change mitigation, decreased environmental pollution, and enhanced energy security. Commercial bioethanol production is based on traditional agricultural crops such as corn, sugarcane, and sugarbeet, primarily used as food and feed. In order to meet the growing demand for this fuel and decrease competition in the food and biofuel sectors for the same feedstock, other raw materials and process technologies have been intensively studied. Lignocellulosic biomass is one of the most abundant renewable resources, with it being rich in compounds that could be processed into energy, transportation fuels, various chemical compounds, and diverse materials. Bioethanol production from lignocellulosic biomass has received substantial attention in recent decades. This review gives an overview of bioethanol production steps from lignocellulosic biomass and challenges in the production process. The following aspects of bioethanol production are covered here, including pretreatment methods, process strategies, strain development, ethanol isolation and purification, and technical hurdles.

Microbial lipids produced from lignocellulosic biomass are sustainable alternative feedstock for biodiesel production. In this study, corn cobs were used as a carbon source for lipid production and growth of oleaginous yeast Trichosporon oleaginosus. Lignocellulosic biomass was subjected to alkali and acid pretreatment using sulfuric acid and sodium hydroxide under different temperatures, catalyst concentrations and treatment times. Pretreatment of corn cobs was followed by cellulase hydrolysis. Hydrolysis of alkali pretreated (2% NaOH at 50 °C for 6 h, 1% NaOH at 50 °C for 16 h, 2% NaOH at 121 °C for 1 h, 1% NaOH at 121 °C for 2 h) and acid pretreated (1% H2SO4 120 °C for 20 min, and 2% H2SO4 120 °C for 10 min) corn cobs resulted in more than 80% of the theoretical yield of glucose. The effect of substrate (5, 10, 15 and 20%, g g−1) and cellulase loading (15 and 30 Filter Paper Units per gram of glucan, FPU g−1) on fermentable sugar yield was also studied. The maximal glucose concentration of 81.64 g L−1 was obtained from alkali-pretreated corn cobs (2% NaOH at 50 °C for 6 h) at 20% substrate loading and 30 FPU of Cellic CTec2 g−1 of glucan. Enzymatic hydrolysates of pretreated biomasses and filtrates of lignocellulosic slurries obtained after pretreatment were used for growth and lipid synthesis by T. oleaginosus. The highest lipid concentration of 18.97 g L−1 was obtained on hydrolysate of alkali-pretreated corn cobs (with 1% NaOH at 50 °C for 16 h) using a 15% (g g−1) substrate loading and 15 FPU g−1 of cellulase loading. Significant lipid accumulation was also achieved using undetoxified filtrates of pretreated slurries as substrates. Results showed that pretreated corn cobs and undetoxified filtrates are suitable carbon sources for the growth and efficient accumulation of lipids in T. oleaginosus.

Marine microalgae and cyanobacteria are sources of diverse bioactive compounds with potential biotechnological applications in food, feed, nutraceutical, pharmaceutical, cosmetic and biofuel industries. In this study, five microalgae, Nitzschia sp. S5, Nanofrustulum shiloi D1, Picochlorum sp. D3, Tetraselmis sp. Z3 and Tetraselmis sp. C6, and the cyanobacterium Euhalothece sp. C1 were isolated from the Adriatic Sea and characterized regarding their growth kinetics, biomass composition and specific products content (fatty acids, pigments, antioxidants, neutral and polar lipids). The strain Picochlorum sp. D3, showing the highest specific growth rate (0.009 h−1), had biomass productivity of 33.98 ± 0.02 mg L−1 day−1. Proteins were the most abundant macromolecule in the biomass (32.83–57.94%, g g−1). Nanofrustulum shiloi D1 contained significant amounts of neutral lipids (68.36%), while the biomass of Picochlorum sp. D3, Tetraselmis sp. Z3, Tetraselmis sp. C6 and Euhalothece sp. C1 was rich in glycolipids and phospholipids (75%). The lipids of all studied microalgae predominantly contained unsaturated fatty acids. Carotenoids were the most abundant pigments with the highest content of lutein and neoxanthin in representatives of Chlorophyta and fucoxanthin in strains belonging to the Bacillariophyta. All microalgal extracts showed antioxidant activity and antimicrobial activity against Gram-negative E. coli and S. typhimurium and Gram-positive S. aureus.