Search

Tracking the microstructural evolution during high-pressure die casting of Al-Si alloys is challenging due to the rapid solidification, varying thermal conditions, and severe turbulence. The process involves a transition from slower cooling in the shot sleeve to rapid cooling in the die cavity, resulting in a bimodal dendritic microstructure and nucleation of new finer dendrite arms on fragmented externally solidified crystals. In this study, a two-dimensional phase-field model was employed to investigate the solidification behaviour of a hypoeutectic Al-7% Si alloy during high-pressure die casting. The model is based on thermodynamic formulations that account for temperature changes due to phase transformation heat, thermal boundary conditions, and solute diffusion in both liquid and solid phases. To replicate the observed bimodal microstructure, solid–liquid interface properties such as thickness, energy, and mobility were systematically varied to reflect the transition from the shot sleeve to the die cavity. The results demonstrated the model's ability to capture the growth of dendrites under shot sleeve conditions and nucleation and development of new dendrite arms under the rapid cooling conditions of the die cavity. [ABSTRACT FROM AUTHOR]

In addition to impurities in recycled aluminum alloys, non-metallic inclusions are a significant factor that deteriorates the material's castability and final mechanical properties. This, therefore, restricts the ability to transition from a primary to secondary aluminum alloy. In this study, the cleanliness of the recycled A357 alloy was evaluated through non-metallic inclusions' characterization, hydrogen content measurement, fluidity test, and casting defects identification. The non-metallic inclusions generated during the recycling process of A357 alloy were collected by the pressurized melt filtration technique. All of the inclusion types collected during filtration were examined and identified by analytical scanning electron microscopy (SEM). Extra additions of up to 2 wt.% swarf in these secondary A357 alloys were designed to simulate highly contaminated alloys. Different to the conventional melt cleaning technologies that mainly focus on complete removal of inclusions, this study developed a novel approach that combines the removal of easily removeable inclusions while preserving well-dispersed inclusions that do not adversely affect the mechanical properties. This study demonstrates that high shear melt conditioning (HSMC) technology can achieve well-dispersed small non-metallic inclusions, low hydrogen content, improved fluidity, and fewer casting defects. As a result, the melt quality of the recycled A357 alloys has achieved a quality comparable to that of primary A357 alloy. [ABSTRACT FROM AUTHOR]