Search

Hydraulic pumps are considered to have a major contribution to the structure borne noise generated inside aircrafts. Methods such as Component-Based Transfer Path Analysis (CB-TPA) are promising tools for aircraft manufacturers to build internal processes for the specification, design and validation of the impact of vibrating systems on new aircrafts. However, the experimental applicability of these methods remains limited due to some experimental difficulties. CB-TPA' formulation is based on dynamical quantities, which require the determination of terms related to rotational degrees of freedom. Virtual Point (VP) or Equivalent Multi-Point Connection (EMPC) methods are commonly employed for this purpose, but both result in more cumbersome experimental set-ups and increased measurement uncertainties. The implementation of these methods is difficult in the case of a flat and thin receiving structure as commonly encountered in aircraft applications, since in-plane translational excitations have to be applied and the access to the vibrating system/structure interface points is limited. In this work, a decoupling procedure is used to overcome these issues. A numerical model is used to investigate the influence of model and operator uncertainties on the CB-TPA' predictions, when the dynamical quantities are provided by VP and EMPC methods including the decoupling procedure.

Designing earplugs adapted for the widest number of earcanals requires acoustical test fixtures (ATFs) geometrically representative of the population. Most existing ATFs are equipped with unique sized straight cylindrical earcanals, considered representative of average human morphology, and are therefore unable to assess how earplugs can fit different earcanal morphologies. In this study, a methodology to cluster earcanals as a function of their morphologies with the objective of designing artificial ears dedicated to sound attenuation measurement is developed and applied to a sample of Canadian workers’ earcanals. The earcanal morphologic indicators that correlate with the attenuations of six models of commercial earplugs are first identified. Three clusters of earcanals are then produced using statistical analysis and an artificial intelligence-based algorithm. In the sample of earcanals considered in this study, the identified clusters differ by the earcanal length and by the surface and ovality of the first bend cross section. The cluster that comprises earcanals with small girth and round first bend cross section shows that earplugs induced attenuation significantly higher than the cluster that includes earcanals with a bigger and more oval first bend cross section.

The occlusion effect (OE) occurs when the earcanal becomes occluded by an in-ear device, sometimes leading to discomforts experienced by the users due to the augmented perception of physiological noises, or to a distorted perception of one's own voice. The OE can be assessed objectively by measuring the amplification of the low-frequency sound pressure level (SPL) in the earcanal using in-ear microphones. However, as revealed by methodological discrepancies found in past studies, the measurement of this objective occlusion effect (OEobj) is not standardized. With the goal of proposing a robust yet simple methodology adapted for field assessment, three experimental aspects are investigated: (i) stimulation source and the stimulus's characteristics to induce the phenomenon, (ii) measurement method of the SPL in earcanal, (iii) indicator to quantify the OEobj. To do so, OEobj is measured on human participants in laboratory conditions. Results obtained with a specific insert device suggest using the participant's own voice combined with simultaneous measurements of the SPLs based on the noise reduction method and using a single value indicator leads to a simple yet robust methodology to assess OEobj. Further research is necessary to validate the results with other devices and to generalize the methodology for field assessment.

Acoustic imaging can be performed using a spherical microphone array (SMA) and conventional beamforming (CBF) or spherical harmonic beamforming (SHB). At low frequencies, the mainlobe width depends on the SMA radius for CBF and on the order of the spherical harmonics expansion for SHB, which is related to the number of microphones. In this letter, Kriging is used to virtually increase the SMA radius and/or the number of microphones. Numerical and experimental investigations show the effectiveness of Kriging to reduce the mainlobe width and thus improve the acoustic images obtained with a SMA and CBF or SHB.

Offering hearing protection devices (HPDs) to workers exposed to hazardous noise is a noise control strategy often used to prevent noise-induced hearing loss (NIHL). However, HPDs are used incorrectly and inconsistently, which explains their limited efficiency. Numerous models based on social cognition theories identify the significant factors associated with inconsistent HPD use and aim to improve HPD training programs and to increase HPD use. However, these models do not detail (dis)comfort aspects originating from complex interactions between characteristics of the triad “environment/person/HPD” while these aspects are known to largely influence HPD (mis)use. This paper proposes a holistic model explaining HPD (mis)use, based on the integration of a comfort model adapted to HPDs into an existing behavioral model already developed for HPDs. The model also takes into account the temporal dimension, which makes it possible to capture the scope of change in HPD-related health behaviors. This holistic description of HPD use could be used as a tool for stakeholders involved in HPD use to effectively prevent NIHL among workers.

The sound attenuation of double hearing protectors (DHPs), earplugs combined with earmuffs, generally falls short of the sum of each single protector's attenuation when used independently. This phenomenon, referred to as the DHP effect, is found to be related to structure-borne sound transmission involving the outer ear and can also be observed on acoustic test fixtures (ATFs). At present, it still remains not fully understood, and no available model can help demonstrate the associated sound transmission mechanisms. In this work, a finite element model is proposed to study the DHP effect on an ATF between 100 Hz and 5 kHz. Power balances are calculated with selected configurations of the ATF in order to (i) quantify the contribution of each sound path, and study the effects of (ii) the artificial skin and (iii) acoustic excitation on the ATF exterior boundaries. The DHP effect is shown to originate from the structure-borne sound power injected from the ATF boundaries and/or earmuff cushion. The important influence of earcanal wall vibration is highlighted when the skin is accounted for. The simulation results allow for gaining more insight into the sound transmission through a DHP/ATF system.

The occlusion effect is an acoustic discomfort commonly encountered by earplugs’ users, which corresponds to the increased auditory perception of the bone-conducted sound mainly at low frequencies. This perception is accompanied by the augmentation of the sound pressure level in the earcanal when occluded by the earplug compared to the open case. While the source of the SPL generated in the earcanal in both open and occluded cases is mainly attributed to the vibration of the earcanal wall, the sound radiation of the tympanic membrane that stems from the middle ear vibration is commonly considered as not significant. To investigate this phenomenon, a finite element model that incorporates the middle ear components into a realistic human outer ear is developed. First, the finite element model is evaluated by comparing the acoustic impedance computed at the eardrum surface to literature data obtained on human subjects. Second, the finite element model is used to quantify the contribution of the sound radiation that originates from the middle ear on the sound pressure level generated in both open and occluded earcanals under a bone-conducted stimulation.

Blocking the earcanal’s entrance with an earplug can lead users to experience discomforts, one being the occlusion effect (OE), typically described as a distorted perception of one’s own voice. This discomfort sometimes causes users to misuse or remove their earplugs which significantly lower their efficiency. Reducing the OE generated by earplugs is therefore critical to make them more comfortable. However, assessing the OE is cumbersome and time-consuming as participants’ feedback is required. Moreover, the influence of factors on the OE, namely, the type or earplug, the insertion depth, and the background noise level, remains to be understood. Hence, this ongoing research aims at objectivizing the OE induced by earplugs during speech. To do so, the OE is assessed in laboratory conditions with 30 normal hearing participants using a questionnaire and by using surrogate earplugs for in-ear microphonic measurements. Various sound pressure level-based indicators are proposed and correlated to the (dis)comfort during the objectivization step. Multiple combinations of earplugs, insertion depths and background noise levels are tested to obtain a ranking of the conditions generating more or less OE. The objectivization of the OE will be a useful tool for manufacturers developing new earplugs without requiring participants’ feedback.