Search

The 1960s saw the emergence of plastic as an indispensable component in various fields, including art and design. Acrylonitrile-butadiene-styrene (ABS) is widely used by artists and designers for a range of applications including sculptures and decorative pieces. Consequently, the necessity to conserve ABS from deterioration is a crucial issue in the field of cultural heritage preservation. Many studies have highlighted the criticality of the stability of the polybutadiene component when exposed to light. We propose a new multimodal spectroscopic approach to assess the conservation status of plastic design objects. This non-destructive approach combines correlative Brillouin and Raman micro-spectroscopy (BRaMS), external reflection IR spectroscopy and portable NMR relaxometry. BRaMS is a novel non-destructive technique in the field of heritage conservation, allowing simultaneous monitoring of chemical and mechanical changes occurring at the sample surface. The present study focused on photochemically aged LEGO® bricks made of ABS and aimed to i) correlate chemical and mechanical changes induced by light exposure and ii) introduce a surface degradation index (SDI), measurable in situ by external reflection IR spectroscopy, to assess the state of conservation of plastic artefacts. Finally, non-invasive investigations were carried out on real design objects using the MObile LABoratory (MOLAB) platform.

A multimodal spectroscopic approach is proposed to correlate the mechanical and chemical properties of plastic materials in art and design objects, at both surface and subsurface levels, to obtain information about their conservation state and to monitor their degradation. The approach was used to investigate the photo-oxidation of acrylonitrile butadiene styrene (ABS), a plastic commonly found in many artistic and design applications, using ABS-based LEGO bricks as model samples. The modifications of the chemical and viscoelastic properties of ABS during photoaging were monitored by correlative Brillouin and Raman microspectroscopy (BRaMS), combined with portable and noninvasive broad-range external reflection infrared (IR) spectroscopy and nuclear magnetic resonance (NMR) relaxometry, directly applicable in museums. BRaMS enabled combined measurements of Brillouin light scattering and Raman spectroscopy in a microspectroscopic setup, providing for the coincident probe of the chemical and mechanical changes of ABS at the sample surface. NMR relaxometry allowed for noninvasive measurements of relaxation times and depth profiles which are directly related to the molecular mobility of the material. Complementary chemical information was acquired by external reflection IR spectroscopy. The simultaneous probe of the chemical and mechanical properties by this multimodal spectroscopic approach enabled us to define a decay model of ABS in terms of compositional changes and variation of stiffness and rigidity occurring with photodegradation. The knowledge acquired on LEGO samples has been used to rate the conservation state of ABS design objects noninvasively investigated by external reflection Fourier transform IR spectroscopy and NMR relaxometry offered by the MObile LABoratory (MOLAB) platform of the European Research Infrastructure of Heritage Science., Competing Interests: Declaration of Conflicting InterestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Water release is a crucial aspect when considering cleaning effects on water-sensitive materials. In conservation practice, a water-based cleaning method which limits water release is very often needed. Unfortunately, this is not accompanied by an appropriate measure of the effectively released water. In this paper, water release has been measured by comparing traditional cleaning formulations, such as paper pulp and sepiolite, with several gar gel formulations, used by both Italian and European conservators. The assessment has been carried out by the gravimetric method, using three different stone material specimens as reference: Noto calcarenite, Manciano sandstone and Black Bergamo limestone, whose porosity values and distributions are known. Moreover, water distribution has been evaluated by portable NMR tests. Different commercial agar gel products (Bresciani, CTS, Sigma), having different concentrations (3, 4, and 5%), application modes (rigid at room T or fluid warm gels, with and without inserting Japanese tissue paper), and geometry (horizontal in gravity force direction or vertical), have been compared to obtain a full scenario among different water release mechanisms present in real conservation works. The paper faces the important issue of preparing reproducible chemical or water pads as well, useful for further research aimed at comparing cleaning effects in heritage conservation. The most interesting quantitative results can be summarized as follows. The water release measured from paper pulp and sepiolite was found to be 2 to 4 times higher than from any tested agar gel. Water release decreases by increasing agar concentration; an increase in the agar concentration by 1% induces a decrease in water release in the range 16.98-66.88 g depending on the stone; the increase from 4% to 5% is more obvious with respect to that from 3% to 4%. It is possible to assess the effect of the presence of Japanese paper, which is able to reduce the water release from 18 to 76%, depending on the stone and on the agar used. The gravimetric results were also used in the preliminary calibration tests of a contact probe named System Unit Salinity Index (SUSI), recently patented and useful in providing humidity and salinity indexes in a given porous material.

In this study, sodium alginate (SA) was oxidized with potassium periodate to produce an alginate-based tanning agent. Using OSA as a biodegradable tanning agent and a nano-hydroxyapatite (nano-HAp) low concentration suspension to give flame retardancy to leather, eco-design concepts were applied to establish a chrome-, aldehyde-, and phenol-free tanning process. Micro-DSC, 1 H unilateral nuclear magnetic resonance (NMR), attenuated total reflection mode Fourier transform infrared spectroscopy (FTIR-ATR), and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) were used to investigate the complex matrix collagen-OSA-nano-HAp. Micro-differential scanning calorimetry (micro-DSC) was used to assess OSA's ability to interact with collagen and stabilize the collagen-OSA matrix, while 1 H unilateral (NMR) was used to investigate the aqueous environment and its limitations around collagen molecules caused by their association with OSA and nano-HAp. Industrial standard tests were used to assess the mechanical properties and fire resistance of the new leather prototype. The findings reported here indicate that both OSA and nano-HAp are suitable alternatives for cleaner tanning technologies and more sustainable leather.

Modification of surface silanols is a topic of interest in the preparation of organo-functionalized silica particles. Herein, two novel contributions, mainly focused on separation science, were presented: i) the horizontal polymerization on silica surface by using the vinyl-triacetoxy silane and ii) a preparation of cysteine-based stationary phase via photo-click thiol-ene coupling. In the first derivatization step, the vinyl-triacetoxy silane was employed instead of conventional trichloro vinyl one. The one-step synthetic procedure needed imidazole as an activating agent in addition to the silica hydration. Modified silica particles offer a high loading of vinyl fragments and an extensive passivation of silanols such as to not require a subsequent end-capping procedure. The structural morphology of media was deeper characterized by combining infrared spectroscopy, solid-state nuclear magnetic resonance, and elemental analysis. A first application, the photo-click cysteine-based material was prepared by photo-click reaction and the stationary phase was employed in the separation of some conventional targets by hydrophilic interaction chromatography., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)