Search

A Na-doped iridium oxide film is heterogeneously deposited on ITO. Time-resolved XAS validates the sequential oxidative–reductive steps for the Ir3+ precursor. The film exhibits an impressive electrochemical performance and a negligible bio-toxicity.

A Na–IrOx(OH)y cell using body fluid as the electrolyte demonstrates large charge storage capacity and long lifetime.

A chitosan composite with a vertical array of pore channels is fabricated via an electrophoretic deposition (EPD) technique. The composite consists of chitosan and polyethylene glycol, as well as nanoparticles of silver oxide and silver. The formation of hydrogen bubbles during EPD renders a localized increase of hydroxyl ions that engenders the precipitation of chitosan. In addition, chemical interactions among the constituents facilitate the establishment of vertical channels occupied by hydrogen bubbles that leads to the unique honeycomb-like microstructure; a composite with a porosity of 84%, channel diameter of 488 µm, and channel length of 2 mm. The chitosan composite demonstrates an impressive water uptake of 2100% and a two-stage slow release of silver. In mass transport analysis, both Disperse Red 13 and ZnO powders show a much enhanced transport rate over that of commercial gauze. Due to its excellent structural integrity and channel independence, the chitosan composite is evaluated in a passive suction mode for an adhesive force of 9.8 N (0.56 N cm

We developed implementation technologies for artificial vision devices compatible with suprachoroidal transretinal stimulation. We aimed to develop a device that can be safely implanted in the sclera of the eye for a long period. Using parylene C and bioceramics as biocompatible base materials, we realized a device with high in vivo safety by making the device structure flexible and reducing the wires of control signals. We successfully created a prototype device that combines a flexible wire structure based on a parylene C thin film with a wire-saving CMOS smart electrode structure based on CMOS integrated circuits. We conducted in vitro and in vivo experiments to confirm their performances. The immersion test confirmed that the device could work normally for four days. Furthermore, in the in vivo experiments using rats, we successfully measured evoked potentials in the brain induced by the stimulation current using the device.

A remote optogenetic device for analyzing freely moving animals has attracted extensive attention in optogenetic engineering. In particular, for peripheral nerve regions, a flexible device is needed to endure the continuous bending movements of these areas. Here, a remote optogenetic optical transducer device made from a gold inverse opaline skeleton grown with a dendrite-like gold nanostructure (D-GIOF) and chemically grafted with upconversion nanoparticles (UCNPs) is developed. This implantable D-GIOF-based transducer device can achieve synergistic interaction of the photonic crystal effect and localized surface plasmon resonance, resulting in considerable UCNP conversion efficiency with a negligible thermal effect under low-intensity 980 nm near-infrared (NIR) light excitation. Furthermore, the D-GIOF-based transducer device exhibits remarkable emission power retention (≈100%) under different bending states, indicating its potential for realizing peripheral nerve stimulation. Finally, the D-GIOF-based transducer device successfully stimulates neuronal activities of the sciatic nerve in mice. This study demonstrates the potential of the implantable device to promote remote NIR stimulation for modulation of neural activity in peripheral nerve regions and provides proof of concept for its in vivo application in optogenetic engineering.

Numerous efforts have been attempted to mimic human tongue since years. However they still have limitations because of damages, temperature effects, detection ranges etc. Herein, a self-healable hydrogel-based artificial bioelectronic tongue (E-tongue) containing mucin as a secreted protein, sodium chloride as an ion transporting electrolyte, and chitosan/poly(acrylamide-co-acrylic acid) as the main 3D structure holding hydrogel network was synthesized. This E-tongue is introduced to mimic astringent and bitter mouth feel based on cyclic voltammetry (CV) measurements subjected to target substances, which permits astringent tannic acid (TA) and bitter quinine sulfate (QS) to be detected over wide corresponding ranges of 29.3 mM-0.59 μM and 63.8 mM-6.38 μM with remarkable respective sensitivities of 0.2 and 0.12 wt%−1. Besides, the taste selectivity of this E-tongue is performed in the presence of various mixed-taste chemicals to show its high selective behavior toward bitter and astringent chemicals. The electrical self-healability is shown via CV responses to illustrate electrical recovery within a short time span. In addition, cytotoxicity tests using HeLa cells are performed, where a clear viability of ≥95% verified its biocompatibility. The anti-freezing sensing of E-tongue tastes at −5 °C also makes this work to be useful at sub-zero environments. Real time degrees of tastes are detected using beverages and fruits to confirm future potential applications in food taste detections and humanoid robots.