Search

This paper considers near-field multiuser communications based on sparse arrays (SAs). First, for the uniform SAs (USAs), we analyze the beam gains of channel steering vectors, which shows that increasing the antenna spacings can effectively improve the spatial resolution of the antenna arrays to enhance the sum rate of multiuser communications. Then, we investigate nonuniform SAs (NSAs) to mitigate the high multiuser interference from the grating lobes of the USAs. To maximize the sum rate of near-field multiuser communications, we optimize the antenna positions of the NSAs, where a successive convex approximation-based antenna position optimization algorithm is proposed. Moreover, we find that the channels of both the USAs and the NSAs show uniform sparsity in the defined surrogate distance-angle (SD-A) domain. Based on the channel sparsity, an on-grid SD-A-domain orthogonal matching pursuit (SDA-OMP) algorithm is developed to estimate multiuser channels. To further improve the resolution of the SDA-OMP, we also design an off-grid SD-A-domain iterative super-resolution channel estimation algorithm. Simulation results demonstrate the superior performance of the proposed methods.

This paper investigates beam training for extremely large-scale multiple-input multiple-output systems. By considering both the near field and far field, a triple-refined hybrid-field beam training scheme is proposed, where high-accuracy estimates of channel parameters are obtained through three steps of progressive beam refinement. First, the hybrid-field beam gain (HFBG)-based first refinement method is developed. Based on the analysis of the HFBG, the first-refinement codebook is designed and the beam training is performed accordingly to narrow down the potential region of the channel path. Then, the maximum likelihood (ML)-based and principle of stationary phase (PSP)-based second refinement methods are developed. By exploiting the measurements of the beam training, the ML is used to estimate the channel parameters. To avoid the high computational complexity of ML, closed-form estimates of the channel parameters are derived according to the PSP. Moreover, the Gaussian approximation (GA)-based third refinement method is developed. The hybrid-field neighboring search is first performed to identify the potential region of the main lobe of the channel steering vector. Afterwards, by applying the GA, a least-squares estimator is developed to obtain the high-accuracy channel parameter estimation. Simulation results verify the effectiveness of the proposed scheme.

A variable-phase-shifter (VPS) architecture with hybrid precoding for mixture use of phase shifters and switches, is proposed for millimeter wave massive multiple-input multiple-output communications. For the VPS architecture, a hybrid precoding design (HPD) scheme, called VPS-HPD, is proposed to optimize the phases according to the channel state information by alternately optimizing the analog precoder and digital precoder. To reduce the computational complexity of the VPS-HPD scheme, a low-complexity HPD scheme for the VPS architecture (VPS-LC-HPD) including alternating optimization in three stages is then proposed, where each stage has a closed-form solution and can be efficiently implemented. To reduce the hardware complexity introduced by the large number of switches, we consider a group-connected VPS architecture and propose a HPD scheme, where the HPD problem is divided into multiple independent subproblems with each subproblem flexibly solved by the VPS-HPD or VPS-LC-HPD scheme. Simulation results verify the effectiveness of the propose schemes and show that the proposed schemes can achieve satisfactory spectral efficiency performance with reduced computational complexity or hardware complexity.

To develop a low-complexity multicast beamforming method for millimeter wave communications, we first propose a channel gain estimation method in this article. We use the beam sweeping to find the best codeword and its two neighboring codewords to form a composite beam. We then estimate the channel gain based on the composite beam, which is computed off-line by minimizing the variance of beam gain within beam coverage. With the estimated channel gain, we propose a multicast beamforming design method under the max-min fair (MMF) criterion. To reduce the computational complexity, we divide the large antenna array into several small-size sub-arrays, where the size of each sub-array is determined by the estimated channel gain. In particular, we introduce a phase factor for each sub-array to explore additional degree of freedom for the considered problem. Simulation results show that the proposed multicast beamforming design method can substantially reduce the computational complexity with little performance sacrifice compared to the existing methods.

In this paper, multiuser beam training based on hierarchical codebook for millimeter wave massive multi-input multi-output is investigated, where the base station (BS) simultaneously performs beam training with multiple user equipments (UEs). For the UEs, an alternative minimization method with a closed-form expression (AMCF) is proposed to design the hierarchical codebook under the constant modulus constraint. To speed up the convergence of the AMCF, an initialization method based on Zadoff-Chu sequence is proposed. For the BS, a simultaneous multiuser beam training scheme based on an adaptively designed hierarchical codebook is proposed, where the codewords in the current layer of the codebook are designed according to the beam training results of the previous layer. The codewords at the BS are designed with multiple mainlobes, each covering a spatial region for one or more UEs. Simulation results verify the effectiveness of the proposed hierarchical codebook design schemes and show that the proposed multiuser beam training scheme can approach the performance of the beam sweeping but with significantly reduced beam training overhead.

Energy efficiency (EE) is an important aspect of satellite communications. Different with the existing algorithms that typically use the first-order Taylor lower bound approximation to convert non-convex EE maximization (EEM) problems into convex ones, in this letter a two-step quadratic transformation method is presented. In the first step, the fractional form of the achievable rate over the total power consumption is converted into a non-fractional form based on quadratic transformation. In the second step, the fractional form of the signal power over the interference-and-noise power is further converted into a non-fractional form, still based on quadratic transformation. After the two-step quadratic transformation, the original EEM problem is converted into an equivalent convex one. Then an alternating optimization algorithm is presented to solve it by iteratively performing two stages until a stop condition is satisfied. Simulation results show that the presented algorithm can fast converge and its performance is better than that of the sequential convex approximation algorithm and the multibeam interference mitigation algorithm.

In this letter, we investigate time-domain channel estimation for wideband millimeter wave (mmWave) MIMO OFDM system. By transmitting frequency-domain pilot symbols as well as different beamforming vectors, we observe that the time-domain mmWave MIMO channels exhibit channel delay sparsity and especially block sparsity among different spatial directions. Then we propose a time-domain channel estimation exploiting block sparsity (TDCEBS) scheme, which always aims at finding the best nonzero block achieving the largest projection of the residue at each iterations. In particular, we evaluate the system performance using the QuaDRiGa which is recommended by 5G New Radio to generate wideband mmWave MIMO channels. The effectiveness of the proposed TDCEBS scheme is verified by the simulation results, as the proposed scheme outperforms the existing schemes.

In this letter, we consider hybrid beamforming for millimeter wave (mmWave) MIMO integrated sensing and communications (ISAC). We design the transmit beam of a dual-functional radar-communication (DFRC) base station (BS), aiming at approaching the objective radar beam pattern, subject to the constraints of the signal to interference-plus-noise ratio (SINR) of communication users and total transmission power of the DFRC BS. To provide additional degree of freedom for the beam design problem, we introduce a phase vector to the objective beam pattern and propose an alternating minimization method to iteratively optimize the transmit beam and the phase vector, which involves second-order cone programming and constrained least squared estimation, respectively. Then based on the designed transmit beam, we determine the analog beamformer and digital beamformer subject to the constant envelop constraint of phase shifter network in mmWave MIMO, still using the alternating minimization method. Simulation results show that under the same SINR constraint of communication users, larger antenna array can achieve better radar beam quality.