Search

A low-noise amplifier (LNA) design with the operation of concurrent dual-band for Global Navigation Satellite System (GNSS) receivers with single channel is presented in this work. This LNA structure has an inductively degenerated cascode architecture and is pseudo-differential, operating at two frequencies simultaneously (1.2 GHz and 1.57 GHz). Two noise reduction/cancellation techniques, using load capacitor and feedforward path, respectively, are proposed resulting in an excellent improvement in the noise figure (NF). The input matching circuit uses both series and parallel resonant components to enable concurrency. The adopted pseudo-differential structure results in input balun elimination. Inductively degenerated cascode topology provides both input impedance and optimum noise impedance matching. The soundness of the proposed approach has been demonstrated in a 0.18-µm CMOS technology by TSMC. Simulation results show that at 1.2 GHz and 1.57 GHz the LNA achieves −13 dB and −11 dB of input matching, 24.6 dB and 24.7 dB of gain, 1.47 dB and 1.43 dB of NF, respectively. The input-referred 1-dB compression point (IP1dB) is around −16 dBm, while the input-referred third-order intercept point (IIP3) achieves −2.2 dBm at 1.2 GHz and −0.6 dBm at 1.57 GHz. The LNA draws about 13 mA from a 1.8-V supply voltage. [ABSTRACT FROM AUTHOR]

This paper presents a lumped scalable model for spiral inductors in a radio frequency (RF) gallium nitride (GaN) technology on silicon substrate. The model has been developed by exploiting electromagnetic (EM) simulations of geometrically scaled spiral inductors. To this aim, the technology substrate, i.e., the metal back-end-of-line along with dielectric and semiconductor layers of the adopted GaN process, has been validated by means of experimental data and then used to define the EM simulator set-up for the spiral inductors. The proposed model adopts a simple π-topology with only seven lumped components and predicts inductor performance in terms of inductance, quality factor (Q-factor) and self-resonance frequency (SRF) for a large range of geometrical parameters of the spiral (i.e., number of turns, metal width, inner diameter). [ABSTRACT FROM AUTHOR]