8 results on '"S. Zanoni"'
Search Results
2. Challenges and opportunities for improving energy efficiency in SMEs: learnings from seven European projects
- Author
-
R. Agrawal, L. De Tommasi, P. Lyons, S. Zanoni, G. K. Papagiannis, C. Karakosta, A. Papapostolou, A. Durand, L. Martinez, G. Fragidis, M. Corbella, L. Sileni, L. Neusel, M. Repetto, I. Mariuzzo, T. Kakardakos, E. Llano Güemes, and Publica
- Subjects
General Energy ,Energy efficiency ,Energy audit ,SMEs ,Energy conservation measures - Abstract
This paper analyses challenges and opportunities for improving energy efficiency in small and medium enterprises (SMEs) by reviewing research design and results out of seven European projects: SPEEDIER, SMEmPower Efficiency, E2Driver, Innoveas, Triple-A, DEESME and ICCEE. These projects aim to improve SMEs’ awareness of energy efficiency and support an effective decision-making-oriented approach to it. Drivers and barriers to energy efficiency improvements in European SMEs of various industrial sectors have been investigated by means of surveys, focused group discussions and interviews. A meta-analysis of the results of the seven EU projects was carried out to discover trends related to energy efficiency in European SMEs; this was supported by the use of a unifying analytic framework that enabled merging and cross-validation of the findings of the seven projects. The analysis indicated, by means of new data collected by the seven projects, that staff training, facilitation of energy audits, development of corporate policy measures and collaboration between SMEs involved in the same supply chain are key mechanisms to improve the uptake of energy efficiency measures in SMEs which has significant potential to achieve higher energy savings and energy cost reductions.
- Published
- 2023
- Full Text
- View/download PDF
3. Perovskite/Perovskite Tandem Solar Cells in the Substrate Configuration with Potential for Bifacial Operation
- Author
-
Lidón Gil-Escrig, Shuaifeng Hu, Kassio P. S. Zanoni, Abhyuday Paliwal, M. Angeles Hernández-Fenollosa, Cristina Roldán-Carmona, Michele Sessolo, Atsushi Wakamiya, and Henk J. Bolink
- Subjects
General Chemical Engineering ,Biomedical Engineering ,General Materials Science ,Materials ,Cèl·lules fotoelèctriques - Abstract
Perovskite/perovskite tandem solar cells have recently exceeded the record power conversion efficiency (PCE) of single-junction perovskite solar cells. They are typically built in the superstrate configuration, in which the device is illuminated from the substrate side. This limits the fabrication of the solar cell to transparent substrates, typically glass coated with a transparent conductive oxide (TCO), and adds constraints because the first subcell that is deposited on the substrate must contain the wide-bandgap perovskite. However, devices in the substrate configuration could potentially be fabricated on a large variety of opaque and inexpensive substrates, such as plastic and metal foils. Importantly, in the substrate configuration the narrow-bandgap subcell is deposited first, which allows for more freedom in the device design. In this work, we report perovskite/perovskite tandem solar cells fabricated in the substrate configuration. As the substrate we use TCO-coated glass on which a solution-processed narrow-bandgap perovskite solar cell is deposited. All of the other layers are then processed using vacuum sublimation, starting with the charge recombination layers, then the wide-bandgap perovskite subcell, and finishing with the transparent top TCO electrode. Proof-of-concept tandem solar cells show a maximum PCE of 20%, which is still moderate compared to those of best-in-class devices realized in the superstrate configuration yet higher than those of the corresponding single-junction devices in the substrate configuration. As both the top and bottom electrodes are semitransparent, these devices also have the potential to be used as bifacial tandem solar cells.
- Published
- 2022
4. Single‐Source Vapor‐Deposition of MA 1–x FA x PbI 3 Perovskite Absorbers for Solar Cells
- Author
-
Tatiana Soto‐Montero, Suzana Kralj, Wiria Soltanpoor, Junia S. Solomon, Jennifer S. Gómez, Kassio P. S. Zanoni, Abhyuday Paliwal, Henk J. Bolink, Christoph Baeumer, Arno P. M. Kentgens, Monica Morales‐Masis, Inorganic Materials Science, and MESA+ Institute
- Subjects
Biomaterials ,mixed-organic-cation halide perovskites ,UT-Hybrid-D ,Electrochemistry ,vacuum-processed perovskite solar cells ,solvent-free methods ,Condensed Matter Physics ,physical vapor deposition ,pulsed laser deposition ,stoichiometry control ,Electronic, Optical and Magnetic Materials - Abstract
Vapor deposition of halide perovskites presents high potential for scalability and industrial processing of perovskite solar cells. It prevents the use of toxic solvents, allows thickness control, and yields conformal and uniform coating over large areas. However, the distinct volatility of the perovskite organic and inorganic components currently requires the use of multiple thermal sources or two-step deposition to achieve the perovskite phase. In this work, single-source, single-step MA1–xFAxPbI3 thin film deposition with tunable stoichiometry by pulsed laser deposition is demostrated. By controlling the laser ablation of a solid target containing adjustable MAI:FAI:PbI2 ratios, the room temperature formation of cubic α-phase MA1–xFAxPbI3 thin films is demonstrated. The target-to-film transfer of the ablated species, including the integrity of the organic molecules and the desired MA+:FA+ ratio, is confirmed by x-ray photoelectron spectroscopy and solid-state NMR. Photoluminescence analysis further confirms the shift of the bandgap with varying the MA+:FA+ ratio. Finally, proof-of-concept n-i-p solar cells with 14% efficiency are demonstrated with as-deposited non-passivated pulsed laser deposition (PLD)-MA1–xFAxPbI3. This study opens the path for future developments in industry-compatible vapor-deposition methods for perovskite solar cells.
- Published
- 2023
- Full Text
- View/download PDF
5. Transparent Light‐Emitting Electrochemical Cells
- Author
-
Lorenzo Mardegan, Abhyuday Paliwal, Kassio P. S. Zanoni, Daniel Tordera, and Henk J. Bolink
- Subjects
Electroquímica ,Materials ,Atomic and Molecular Physics, and Optics ,Electronic, Optical and Magnetic Materials - Abstract
Single layer light-emitting electrochemical cells (LECs) are amongst the simplest electroluminescent devices and operate with air-stable electrodes. Transparent light-emitting devices are of great interest as they can enable new applications in consumer electronics. In this work, a transparent ionic transition metal complex based LEC is fabricated by developing a transparent top contact based on tin (IV) oxide (SnO2) and indium-tin oxide, processed by low-temperature atomic layer deposition and pulsed laser deposition, respectively. The resulting devices present transparency in excess of 75% over the full visible spectrum (380-750 nm), with 82% transmission at the emission peak (563 nm). The devices emit from the front and the rear with high luminance (260 cd m−2) and long lifetime (176 h). These parameters place them among the highest performing single layer transparent electroluminescent devices.
- Published
- 2022
- Full Text
- View/download PDF
6. Sustainable radiology departments: A European survey to explore radiographers' perceptions of environmental and energy sustainability issues.
- Author
-
Roletto A, Catania D, Rainford L, Savio A, Zanardo M, Bonfitto GR, and Zanoni S
- Subjects
- Humans, Europe, Surveys and Questionnaires, Female, Attitude of Health Personnel, Male, Adult, Middle Aged, Radiology Department, Hospital
- Abstract
Introduction: The environmental impact of radiology and radiotherapy activities is influenced by the energy consumption of equipment, the life cycle of consumables, waste generation, and CO
2 emissions caused by staff travel. This study aims to investigate radiographers' perception and knowledge of environmental sustainability issues., Methods: An online survey was created and distributed to European radiographers and therapeutic radiographers. The survey questions (n = 43) include demographic data; questions on their perceptions and actions regarding environmental sustainability in healthcare, energy consumption, emissions from staff travel, waste generation from radiological procedures; the role of radiographers in addressing sustainability issues within their departments., Results: A total of 253 responses were collected from 27 European countries. About their perception on sustainability issues, most participants considered environmental sustainability in healthcare as very important. According to 63.6% (n = 161) of respondents, the energy consumption of radiological equipment is the major source of environmental footprints from radiology activities. Additionally, 44.7% (n = 113) believe that conducting diagnostic examinations remotely could reduce environmental footprints from staff commuting About their actions at workplace, over 70% (n = 192) reported turning off devices after use. Attention to waste recycling is high, but limited to paper, plastic and glass. Contrast agents recycling procedures are implemented by 13% (n = 33). The absence or unawareness of environmental sustainability procedures in the workplace was reported by 66% (n = 167). Radiographers could play an active role in environmental sustainability programs for 243 (96.1%) participants., Conclusion: This study provides a comprehensive overview of European radiographers' knowledge and perceptions concerning environmental sustainability issues. While radiographers recognize the importance of a green radiology department, significant gaps remain in their understanding of eco-friendly initiatives in radiology units' activities., Implication for Practice: Enhancing radiographers' skills with sustainability expertise could promote a greener culture within radiology departments., Competing Interests: Conflict of interest statement All authors declare that they have no competing interests directly related to this study., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)- Published
- 2024
- Full Text
- View/download PDF
7. The environmental impact of energy consumption and carbon emissions in radiology departments: a systematic review.
- Author
-
Roletto A, Zanardo M, Bonfitto GR, Catania D, Sardanelli F, and Zanoni S
- Subjects
- Humans, Environment, Carbon Footprint, Radiology Department, Hospital
- Abstract
Objectives: Energy consumption and carbon emissions from medical equipment like CT/MRI scanners and workstations contribute to the environmental impact of healthcare facilities. The aim of this systematic review was to identify all strategies to reduce energy use and carbon emissions in radiology., Methods: In June 2023, a systematic review (Medline/Embase/Web of Science) was performed to search original articles on environmental sustainability in radiology. The extracted data include environmental sustainability topics (e.g., energy consumption, carbon footprint) and radiological devices involved. Sustainable actions and environmental impact in radiology settings were analyzed. Study quality was assessed using the QualSyst tool., Results: From 918 retrieved articles, 16 met the inclusion criteria. Among them, main topics were energy consumption (10/16, 62.5%), life-cycle assessment (4/16, 25.0%), and carbon footprint (2/16, 12.5%). Eleven studies reported that 40-91% of the energy consumed by radiological devices can be defined as "nonproductive" (devices "on" but not working). Turning-off devices during idle periods 9/16 (56.2%) and implementing workflow informatic tools (2/16, 12.5%) were the sustainable actions identified. Energy-saving strategies were reported in 8/16 articles (50%), estimating annual savings of thousand kilowatt-hours (14,180-171,000 kWh). Cost-savings were identified in 7/16 (43.7%) articles, ranging from US $9,225 to 14,328 per device. Study quality was over or equal the 80% of high-quality level in 14/16 (87.5%) articles., Conclusion: Energy consumption and environmental sustainability in radiology received attention in literature. Sustainable actions include turning-off radiological devices during idle periods, favoring the most energy-efficient imaging devices, and educating radiological staff on energy-saving practices, without compromising service quality., Relevance Statement: A non-negligible number of articles - mainly coming from North America and Europe - highlighted the need for energy-saving strategies, attention to equipment life-cycle assessment, and carbon footprint reduction in radiology, with a potential for cost-saving outcome., Key Points: • Energy consumption and environmental sustainability in radiology received attention in the literature (16 articles published from 2010 to 2023). • A substantial portion (40-91%) of the energy consumed by radiological devices was classified as "non-productive" (devices "on" but not working). • Sustainable action such as shutting down devices during idle periods was identified, with potential annual energy savings ranging from 14,180 to 171,000 kWh., (© 2024. The Author(s).)
- Published
- 2024
- Full Text
- View/download PDF
8. Magnetic resonance imaging and diffusion tensor imaging reconstruction of connectomes in a macropod, the quokka (Setonix brachyurus).
- Author
-
Thittamranahalli Kariyappa J, Zanoni S, Bongers A, Tong L, and Ashwell KWS
- Subjects
- Animals, Diffusion Magnetic Resonance Imaging methods, Diffusion Tensor Imaging, Macropodidae, Magnetic Resonance Imaging, Neural Pathways physiology, Connectome, Neocortex
- Abstract
The diversity of the diprotodontids provides an excellent opportunity to study how a basic marsupial cortical plan has been modified for the needs of the mammals living in different habitats. Very little is known about the connections of the cerebral cortex with the deep brain structures (basal ganglia and thalamus) in this evolutionarily significant group of mammals. In this study, we performed mapping of brain regions and connections in a diprotodontid marsupial from data obtained from an excised brain scanned in high-field (9.4 T) microstructural magnetic resonance imaging (MRI) instrument. The analysis was based on two MRI methodologies. First, high-resolution structural scans were used to map MRI visible brain regions from T1w and T2w images. Second, extensive diffusion tensor imaging (DTI) data were obtained to elucidate connectivity between brain areas using deterministic diffusion tracking of neuronal brain fibers. From the data, we were able to identify corticostriate connections between the frontal association and dorsomedial isocortex and the head of the caudate, and between the lateral somatosensory cortex and the putamen. We were also able to follow the olfactory and limbic connections by tracing fibers in the fornix, cingulum, intrabulbar part of the anterior commissure, and lateral olfactory tract. There was segregation of fibers in the anterior commissure such that olfactory connections passed through the rostroventral part and successively more dorsal cortical areas connected through more dorsal parts of the commissure. Our findings confirm a common pattern of cortical connectivity in therian mammals, even where brain expansion has occurred independently in diverse groups., (© 2022 Wiley Periodicals LLC.)
- Published
- 2022
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.