Search

The layered double hydroxides (LDHs) of transition metals are of great interest as building blocks for the creation of composite photocatalytic materials for hydrogen production, environmental remediation and other applications. However, the synthesis of most LDHs is reported only by the conventional coprecipitation method, which makes it difficult to control the catalyst's crystallinity. In the present study, ZnCr- and NiCr-LDHs have been successfully prepared using a facile hydrothermal approach. Varying the hydrothermal synthesis conditions allowed us to obtain target products with a controllable crystallite size in the range of 2–26 nm and a specific surface area of 45–83 m2∙g−1. The LDHs synthesized were investigated as photocatalysts of hydrogen generation from aqueous methanol. It was revealed that the photocatalytic activity of ZnCr-LDH samples grows monotonically with the increase in their average crystallite size, while that of NiCr-LDH ones reaches a maximum with intermediate-sized crystallites and then decreases due to the specific surface area reduction. The concentration dependence of the hydrogen evolution activity is generally consistent with the standard Langmuir–Hinshelwood model for heterogeneous catalysis. At a methanol content of 50 mol. %, the rate of hydrogen generation over ZnCr- and NiCr-LDHs reaches 88 and 41 μmol∙h−1∙g−1, respectively. The hydrothermally synthesized LDHs with enhanced crystallinity may be of interest for further fabrication of their nanosheets being promising components of new composite photocatalysts. [ABSTRACT FROM AUTHOR]

Nanosheets of layered perovskite-like oxides attract researchers as building blocks for the creation of a wide range of demanded nanomaterials. However, Ruddlesden–Popper phases are difficult to separate into nanosheets quantitatively via the conventional liquid-phase exfoliation procedure in aqueous solutions of bulky organic bases. The present study has considered systematically a relatively novel and efficient approach to a high-yield preparation of concentrated suspensions of perovskite nanosheets. For this, the Ruddlesden–Popper titanates HLnTiO4 and H2Ln2Ti3O10 (Ln = La, Nd) have been intercalated by n-alkylamines with various chain lengths, exposed to sonication in aqueous tetrabutylammonium hydroxide (TBAOH) and centrifuged to separate the nanosheet-containing supernatant. The experiments included variations of a wide range of conditions, which allowed for the achievement of impressive nanosheet concentrations in suspensions up to 2.1 g/L and yields up to 95%. The latter were found to strongly depend on the length of intercalated n-alkylamines. Despite the less expanded interlayer space, the titanates modified with short-chain amines demonstrated a much higher completeness of liquid-phase exfoliation as compared to those with long-chain ones. It was also shown that the exfoliation efficiency depends more on the sample stirring time in the TBAOH solution than on the sonication duration. Analysis of the titanate nanosheets obtained by means of dynamic light scattering, electron and atomic force microscopy revealed their lateral sizes of 30–250 nm and thickness of 2–4 nm. The investigated exfoliation strategy appears to be convenient for the high-yield production of perovskite nanosheet-based materials for photocatalytic hydrogen production, environmental remediation and other applications. [ABSTRACT FROM AUTHOR]

A protonated and hydrated Dion-Jacobson-phase HSr2Nb3O10∙yH2O was used to prepare two series of inorganic–organic derivatives containing non-covalently intercalated n-alkylamines and covalently grafted n-alkoxy groups of different lengths, as they are promising hybrid materials for photocatalytic applications. Preparation of the derivatives was carried out both under the conditions of standard laboratory synthesis and by solvothermal methods. For all the hybrid compounds synthesized structure, quantitative composition, a type of bonding between inorganic and organic parts as well as light absorption range were discussed using powder XRD, Raman, IR and NMR spectroscopy, TG, elemental CHN analysis, and DRS. It was shown that the inorganic–organic samples obtained contain approximately one interlayer organic molecule or group per proton of the initial niobate, as well as some amount of intercalated water. In addition, the thermal stability of the hybrid compounds strongly depends on the nature of the organic component anchoring to the niobate matrix. Although non-covalent amine derivatives are stable only at low temperatures, covalent alkoxy ones can withstand heat up to 250 °C without perceptible decomposition. The fundamental absorption edge of both the initial niobate and the products of its organic modification lies in the near-ultraviolet region (370–385 nm). [ABSTRACT FROM AUTHOR]

Two series of hybrid inorganic–organic materials, prepared via interlayer organic modification of protonated Ruddlesden–Popper phases HLnTiO4 (Ln = La, Nd) with n-alkylamines and n-alkoxy groups of various lengths, have been systematically studied with respect to photocatalytic hydrogen evolution from aqueous methanol under near-ultraviolet irradiation for the first time. Photocatalytic measurements were organized in such a way as to control a wide range of parameters, including the hydrogen generation rate, quantum efficiency of the reaction, potential dark activity of the sample, its actual volume concentration in the suspension, pH of the medium and stability of the photocatalytic material under the operating conditions. The insertion of the organic modifiers into the interlayer space of the titanates allowed obtaining new, more efficient photocatalytic materials, being up to 68 and 29 times superior in the activity in comparison with the initial unmodified compounds HLnTiO4 and a reference photocatalyst TiO2 P25 Degussa, respectively. The hydrogen evolution rate over the samples correlates with the extent of their interlayer hydration, as in the case of the inorganic–organic derivatives of other layered perovskites reported earlier. However, the HLnTiO4-based samples demonstrate increased stability with regard to the photodegradation of the interlayer organic components as compared with related H2Ln2Ti3O10-based hybrid materials. [ABSTRACT FROM AUTHOR]

Photocatalytic activity of HB2Nb3O10 perovskite nanosheets (B = Ca, Sr) has been systematically investigated in the reactions of hydrogen production, depending on the method of the photocatalyst preparation: using the pristine nanosheets in the parent suspension without reassembly, filtered nanosheets as well as nanosheets restacked by hydrochloric acid. Photocatalytic measurements were organized in such a way as to control a wide range of parameters, including the hydrogen generation rate, quantum efficiency of the reaction, potential dark activity of the sample as well as stability and pH of the reaction suspension. Exfoliation of the niobates into nanosheets allowed obtaining efficient photocatalysts surpassing the initial bulk materials in the activity up to 55 times and providing apparent quantum efficiency up to 20.8% after surface decoration with a Pt cocatalyst. Among the reassembled samples, greater hydrogen evolution activity was exhibited by simply filtered nanosheets that, unlike the HCl-restacked ones, were found to possess much lower specific surface area in a dry state but contain a perceptible amount of tetrabutylammonium cations on the surface. The activity difference, potentially, is associated with the fact that the filtered nanosheets undergo ultrasonic disaggregation before photocatalytic tests much easier than their HCl-restacked counterparts and, thanks to this, have greater active surface in the reaction suspension. In addition, the enhanced activity of the filtered nanosheets may be due to the presence of tetrabutylammonium as an organic modifier on their surface, which is consistent with the high photocatalytic performance of organically modified layered perovskites considered in our previous reports. [ABSTRACT FROM AUTHOR]

The stability of platinized n-butylamine-intercalated layered titanate H2La2Ti3O10 during the process of photocatalytic hydrogen production from aqueous methanol under UV irradiation has been thoroughly investigated by means of XRD, CHN, TG, 13C NMR, BET, SEM and GC-MS analysis. It was revealed that n-butylamine completely abandons the interlayer space and transforms into n-butyraldehyde within 3 h of the reaction, while the particle morphology and specific surface area of the photocatalyst are preserved. The resulting solid phase contains carbon in at least two different oxidation states, which are attributed to the intermediate products of methanol oxidation bound to the perovskite matrix. The activity of the photocatalyst formed in this way is stable in time and strongly depends on the medium pH, which is not typical of either the parent H2La2Ti3O10 or TiO2. An approximate linear equation φ ≈ 29−2∙pH holds for the apparent quantum efficiency of hydrogen production in the 220–340 nm range at 1 mol. % methanol concentration. In the acidic medium, the photocatalyst under study outperforms the platinized H2La2Ti3O10 by more than one order of magnitude. The variation in methanol concentration allowed a maximum quantum efficiency of hydrogen production of 44% at 10 mol. % to be reached. [ABSTRACT FROM AUTHOR]

Nowadays, the efficient conversion of plant biomass components (alcohols, carbohydrates, etc.) into more energy-intensive fuels, such as hydrogen, is one of the urgent scientific and technological problems. The present study is the first one focused on the photoinduced hydrogen evolution from aqueous D-glucose and D-xylose using layered perovskite-like oxides HCa2Nb3O10, H2La2Ti3O10, and their organically modified derivatives that have previously proven themselves as highly active photocatalysts. The photocatalytic performance was investigated for the bare compounds and products of their surface modification with a 1 mass. % Pt cocatalyst. The photocatalytic experiments followed an innovative scheme including dark stages as well as the control of the reaction suspension's pH and composition. The study has revealed that the inorganic−organic derivatives of the layered perovskite-like oxides can provide efficient conversion of carbohydrates into hydrogen fuel, being up to 8.3 times more active than the unmodified materials and reaching apparent quantum efficiency of 8.8%. Based on new and previously obtained data, it was shown that the oxides' interlayer space functions as an additional reaction zone in the photocatalytic hydrogen production and the contribution of this zone to the overall activity is dependent on the steric characteristics of the sacrificial agent used. [ABSTRACT FROM AUTHOR]